Receiveing and sending pictures
is there any way to receive and send pictures through sms?
Not through SMS, workarounds thorough e-mail though
http://discussions.apple.com/thread.jspa?threadID=1223663&tstart=0
Similar Messages
-
After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?
iMessages or MMS?
MMS and SMS are exchanged over a carrier's cellular network only. Contact your carrier regarding a problem with MMS/SMS. -
How to make my nokia 1600 receive and send picture...
i go problem..please somebody help me...
ohk you just need to contact your service provider and ask him to get you gprs services
edysonlam wrote:
i go problem..please somebody help me... -
My iMac drops settings information. Sounds associated with receiving and sending an email disppear after about a week and return following a shutdown and a restart. The cycle contunes. Also, the picture of me that was taken when I bought the iMac more than a year ago and appeared at logon recently disappeared and was replaced by a soccer ball. I took a new picture, which appeared for about a week at logon, and it has now been replace by a blank picture.
The standard procedure with these types of isues is a PRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379 -
I have a 4s and I'm unable to receive nor send pictures
What can I do?
I'm guessing you are saying you cannot receive or send pictures in text messages (but you can do so in email).
Is Settings > Messages > MMS Messaging set to "On"? It needs to be on.
If it is and you still cannot send or receive message pictures, it may be your cellular carrier's restriction. -
When I try to connect to the web on my Droid 2 it says its not connected and there is no 3G symbol at the top of my phone. I also cannot receive or send picture messages from my phone...Is anyone else having this problem or knows how to fix this?
I do apologize about the issues you are experiencing with your device and I will be more than happy to assist you with resolving those issues. First step will will take in resolve the issues will be by updating your device.
On your phone, dial *228
Select option 2 when prompted
Listen to be advised that the update was successful
The device will power off and on (if this is not completed automatically, complete is manually)
Once the device is power back, go ahead and check to see if you are able to send and receive picture messages and that your 3G is working properly. If not, here is a link to additional troubleshooting information:
http://support.vzw.com/clc/faqs/Equipment/faq_troubleshooting.html?grp=3&faq=3 -
Cant receive or send picture messages
Hi can someone please help me, I have recently bought the Nokia C3 and I cant receive or send picture messages, can someone please advise. Thanks
You need to contact ur operator and ask them to send u MMS & wap and internet settings (Or only MMS), u'll most probably get them via configuration sms, open it, go to options and select "save" phone will ask if to set it as default, select yes. that's it. Try to send Picture message.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4 -
My iphone 4S stopped receiving and sending text messges. Help!
My iphone 4S stopped receiving and sending text messges. Help!
Hi J.A. Curie!
Here is an article that can help you troubleshoot this issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
When my wifi is off and I'm away from my home connection - it shows wifi off (unless I turn it on to check my email etc.) - and in the settings cellular it shows "voice only". Will I be able to receive and send texts in those settings? Or check voicemail. I had wanted to keep my email from coming in all the time and only want to check it periodically - so I turn ON my wifi when I want to check my email. But when my wifi was off away from home- I hadn't seemed to be getting my texts. So- do I need to keep wifi roaming connected when away from home to receive and send my texts in real time. (which is what I want) or am I still able to send and receive texts with my wifi off when I'm away from home. (When I'm home I am connected to my home data plan automatically through wifi and I get texts when I'm home - but I'm thinking I'm not getting texts in real time - is it because my wifi is off when I'm away from home? My cellular shows voice only when my wifi is off away from home. Am I doing it right to receive and send texts away from home? Or do I need to open up the wifi in order to receive and send text messages. I know that I would need to turn on wifi roaming - which will use data - for email checking or sending - as well as to use browsing apps and now I'm guessing to receive voice messages I may have missed? So do I need wifi on to receive texts too? Thank you - GregorySC
Hello GregorySC,
In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen -
I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How do I set up a POP account that links to my business email account for both receiving and sending
How do I set up a POP account that links my icloud email to my business email account for both receiving and sending?
Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
TS3276 Help in setting Apple Mail to receive and send mail via Yahoo mail service
I would appreciate help in setting up Apple Mail to receive and send e-mails via Yahoo. Thank you
Sorry,
Have you tried the connection doctor? In Mail menu bar under Window connection doctor, this will usually let you know where the problem might be.
http://support.apple.com/kb/TS3276 Read thru this as well. -
Message Driven Beans: how to receive and send in a single session?
Hello
How to receive and send JMS messages in a message driven bean using a single session?
Thanks.Are you referring to writing code within the onMessage method itself to receive JMS messages?
If so, that is not a pattern that is recommended, especially not in the case of a blocking JMS
receieve. If you must write an explicit JMS receive within an EJB component it's best to use
a "check the queue" approach where you give a very small timeout for the receive. That way
if the message is there it will be returned but if not the call will not block.
You'll also need to take the transactional settings of the onMessage method into account.
If your are sending a message and then waiting for a response, those two actions can
not be done within the same global transaction. For that, you'll need to either use
BMT and perform each in its own transaction or just not use global transactions at all,
in which case each send and receive operation will be atomic.
--ken -
How to receive and send V/A signal in one host?
The sample code VideoTransmit.java,sames only can send the V/A signal over network,but the sending host cannot receive the signal.
I hope receive and send signal in one host,what should I do?
s.Now,the problem is ,how to send and save the live stream in one host?I hope save the stream to a media file,like *.dat,etc.
Of course,the host user can receive the stream sending by himself.
s. -
How do i clear the receiver and send buffer?
I am trying to communicate with the Votsch 3050 thermal chamber, with LabVIEW as the control software via serial RS232. In sending the required ASCII strings, there was no response from the chamber, yet no error.
The manufacturers indicate clearing the receive and send buffer using the the "PurgeComm(HANDLE hFile, DWORD dwFlags)" function in C, but offer no LabVIEW support.
Does any one have any ideas on how i can do this using LabVIEW? Any Information or VIs would be greatly appreciated.@dsbuxi I have worked with many patient monitors. They often work in a client server setup. Data is not sent before you request it. And the communication has to follow a certain protocol. Your job will be to implement this protocol in Labview. This is not too hard, but it requires some reading to understand the protocol. I am not able to send you any code, but feel free to ask if you need some help regarding the protocol
And you may have to order or make a custom cable. But you will also find this information in the protocol description. Good luck
Message Edited by t06afre on 01-07-2009 09:03 PM
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Maybe you are looking for
-
i make with my canon markIII pictures in 16:9,but in iPhoto those pictures are not in 16:9. why? how can i got in iPhoto 16:9 pictures?
-
Can I force the sync process without DM asking me for confirmations?
DM is working fine with Outlook 2003, and I have the "confirm adds, deletes, changes" options disabled in the Advanced section. Yet every time I connect my device, DM is asking me to confirm stuff. How can I force it to work in stealth mode... just
-
Hello, since I update Adobe Reader from 10.1.9 to 11.0.07 my old little vb6 PDF-Viewer get an Runtime error by add .Controls.Add("AcroPDF.PDF.1", "AcroPDF1", frmMain) Error -2147417848 (80010108). What is change in the Reader-installation or what is
-
HttpURLConnection not connecting to all sites
Hi folks, I have a small class which takes a URL as commandline input and outputs the HTML to stdout: import java.net.*; import java.io.*; public class URLReader { public static void main(String[] args) throws Exception { URL url = new URL(a
-
Authorization error when opening Integration Builder
Hi, When I try to open Integration Builder I'm frequently getting authorization error. I always do a restart of Java engine when ever I get this problem. After the restart, I don't get the error. Can any one tell me what is the permanant fix for th