Receiver Database Down
Hi everyone,
I have a doubt regrading JDBC receiver.Suppose if the database is down due to some unplanned acitivity ,will the JDBC Adapter at PI receiver side go down?I mean as per my knowledge the JDBC adapter will be trying to reconnect to the database based on the configured number of retrials and once that is expired connector should go down.So will there be error in SXMB_MONI?If not how to reprocess the failed events?Do we have to manually start the adapter?
PS : I checked in the forum but it didnt cleared ny doubts.:-(Could you ppl pls help me out.:-)
Thanks.
Suppose if the database is down due to some unplanned acitivity ,will the JDBC Adapter at PI receiver side go down?
No
I mean as per my knowledge the JDBC adapter will be trying to reconnect to the database based on the configured number of retrials and once that is expired connector should go down.
The retry part is fine, but once the max number of retries are reached, connector won't go down. Just that particular message will stay in System Error status.
So will there be error in SXMB_MONI?
No. The System error will be in Runtime Workbench
If not how to reprocess the failed events?Do we have to manually start the adapter?
Restart can be done from Runtime Workbench Message monitoring. As I said earlier, there is no need for adapter restart.
Regards,
Prateek
Similar Messages
-
When I send videos or photos by email they are sometimes received upside down.help.
When I email videos or photos they are sometimes received upside down.help.
You need to clarify your statement/question a little bit more. What device are using to take the photo? I assume that you are using your iPad, but I don't know that for a fact because you simply say "whenever I take a picture". I also assume that you are using the built in mail app and not a third party mail app, but can't say for sure about that either without more details from you.
When I take a photo with the iPad, if I attach/insert a photo in an email directly in the mail app, the photo defaults to the actual size, which is the highest resolution that it can be. The size of the photo can be made smaller, but it defaults to the largest size. -
How to test if remote R/3 system (Receiver) is down in case of Async RFC ?
Hi Experts,
How to test if remote R/3 system (Receiver) is down in case of Async RFC call? There is no BPM as well. I have configured an alert category and created a rule in runtime workbench's Alert Configuration for the specific inbound interface.
I have tried by stopping the channel and also by changing the server name in the communication channel but all in vail. XI still shows message successfully processed.
Kindly help me
Thanks
GopalHi,
How to test system down in XI? Kindly help!
Have answered here as well.
Meanwhile, you would have an error in the receiver RFC adapter in Comm Channel Monitoring.
Maybe you change another RFC adapter rather than the one being used in the receiver agreement.
regards
Bhavesh -
What steps to follow to make RAC Database down.
hi all,
I need to know the order which we have to follow in making RAC database Down Completely,
Information reg database:
OS::IBM AIX,
ASM Storage,
2 node RAC,
2 databases.
order in the sence to shutdown the RAC database first what we have to shutdown like ,
database,asm,cluster, etc.and also give respective commands for reference.
Regards,
vamsi.844795 wrote:
hi all,
I need to know the order which we have to follow in making RAC database Down Completely,
Information reg database:
OS::IBM AIX,
ASM Storage,
2 node RAC,
2 databases.
order in the sence to shutdown the RAC database first what we have to shutdown like ,
database,asm,cluster, etc.and also give respective commands for reference.
Regards,
vamsi.Stopping the Oracle RAC 10g Environment
The first step is to stop the Oracle instance. When the instance (and related services) is down, then bring down the ASM instance. Finally, shut down the node applications (Virtual IP, GSD, TNS Listener, and ONS).
$ export ORACLE_SID=orcl1
$ emctl stop dbconsole
$ srvctl stop instance -d orcl -i orcl1
$ srvctl stop asm -n linux1
$ srvctl stop nodeapps -n linux1
Starting the Oracle RAC 10g Environment
The first step is to start the node applications (Virtual IP, GSD, TNS Listener, and ONS). When the node applications are successfully started, then bring up the ASM instance. Finally, bring up the Oracle instance (and related services) and the Enterprise Manager Database console.
$ export ORACLE_SID=orcl1
$ srvctl start nodeapps -n linux1
$ srvctl start asm -n linux1
$ srvctl start instance -d orcl -i orcl1
$ emctl start dbconsole
Start/Stop All Instances with SRVCTL
Start/stop all the instances and their enabled services. I have included this step just for fun as a way to bring down all instances!
$ srvctl start database -d orcl
$ srvctl stop database -d orcl
reference:http://www.rampant-books.com/art_hunter_rac_start_stop_cluster.htm
refer the links for more informations:
Starting and Stopping Instances and Oracle Real Application Clusters Databases
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/dbinstmgt.htm#BCEBGHHC
Server Control Utility Reference
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/srvctladmin.htm
answered by ssolbach
Just a minor comment on the stop nodeapps.
While it is fine to stop the nodeapps on the server, the drawback to this is, that the VIP will not failover if you stop the nodeapps, but will be stopped.
Hence if you only shutdown one server, then you are causing clients to fail to connect to the VIP and having to wait for the TCP/Timeout.
So if you are not going to shut down all the server, but just want to shutdown one node, you should failover the VIP the the other node.
See: Note 749160.1 Vip Does Not Failover When Nodeapps Stopped
So it is sometimes better instead of stopping the nodeapps, to simply shutdown the cluster with crsctl stop crs (which will failover the VIP).
Sebastian
reference:-
Re: RAC Questions -
Oracle Database down /failover clause ?
hi
I am collecting the information regarding oracle database down / failover clouses , so all of you requested kindly send me your experience regarding Oracle database down/failover reason/clause.
thanks in advance
regardsHi,
Are you looking for notes or scenarious.
If you are looking for some notes follow the below link:
http://pavandba.wordpress.com/category/dataguard/
Thanks,
Rafi. -
Why will the picture until the receiver upside down?
Why will the picture until the receiver upside down?
Here are links to four short MOV files showing the four orientations for the iPhone 4S. I had to upload them to DropBox for you as all of my available Cloud based mail programs choked on saving or sending these little video files.
http://dl.dropbox.com/u/7584570/IMG_0061.MOV
http://dl.dropbox.com/u/7584570/IMG_0062.MOV
http://dl.dropbox.com/u/7584570/IMG_0063.MOV
http://dl.dropbox.com/u/7584570/IMG_0064.MOV
I usually record hockey games in Landscape mode with the Home Button of the iPhone on the left side with the screen facing me. That is the mov file IMG_0063.MOV
Apple's QuickTime Player displays it correctly, while the VLC player, which ignores exif flags plays it upside down. So does the Plex Media streamer ignore the flag, so does the thunderbird mail app ignore the flag, and so on. Adobe looks at the exif flags so they get it right.
My movies are of four Post It Notes, each one describing the location of the Home Button. Take a series of four pictures oriented like my test MOV files , then take 4 short MOV files of the same iPhone orientation. If the results are "misoriented" then the software you are using to look at them is ignoring the orientation flages.
For more detail of this subject look at http://www.impulseadventure.com/photo/exif-orientation.html
JPEG Rotation and EXIF Orientation
Digital Cameras with orientation sensors allow auto-rotation of portrait images. Unfortunately, support for this feature is not widespread or consistently applied.
Digital Cameras with Orientation Sensors
Many newer digital cameras (both dSLR and Point & Shoot digicams) have a built-in orientation sensor. Virtually all Canon and Nikon digital cameras have an orientation sensor. The output of this sensor is used to set the EXIF orientation flag in the image file's metatdata to reflect the positioning of the camera with respect to the ground. Canon calls their sensor the "Intelligent Orientation" sensor. It is presumably a 2-axis tilt sensor, allowing 4 possible orientations to be detected (shown in the left side of the diagram in the link above). -
Hi! My photos are great but are received upside down... How can I prevent this from happening? Thanks!
I have iPad 2 and I am having same problem since I updated to iOS 5. All we can do it is rotate it from computer
-
I receive "Database access denied" when trying to add component 4543BD
I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 62 KB -
When new pix is taken and want to send via email it is received upside down, why?
has anyone have this problem, when you take a picture and want to send via email the picture is received upside down? does anyone know how to fix this?
Better yet, check out the two day gathering of professional photographers who are passionate enough about the iPhone 4S to put together a seminar on iPhoneography.
http://www.creativelive.com/courses/iphoneography-jack-hollingsworth
All the Links!
KateHaileyJanuary 3, 2012 - 1:55pm
Hi everyone,
I just wanted to take a moment to share numerous links that may be referenced over the 2-Day iPhoneography workshop with Jack Hollingsworth.
Please feel free to add to it as you think of other things that might be of great reference to all the iPhoneographer's out there!
Apps:
Adobe Photoshop Express: http://itunes.apple.com/us/app/adobe-photoshop-express/id331975235?mt=8
Best Camera: http://itunes.apple.com/us/app/best-camera/id329800600?mt=8
Camera+: http://itunes.apple.com/us/app//id329670577?mt=8
Filterstorm: http://itunes.apple.com/us/app/filterstorm/id363449020?mt=8
Instagram: http://itunes.apple.com/us/app/instagram/id389801252?mt=8
Luminance: http://itunes.apple.com/us/app/luminance/id443465287?mt=8
Minimal Folio (iPhone): http://itunes.apple.com/us/app/minimal-folio-for-iphone-design/id4124111...
Minimal Folio (iPad): http://itunes.apple.com/us/app/minimal-folio-design-photo/id385429744?mt=8
Photoforge2: http://itunes.apple.com/us/app/photoforge2/id435789422?mt=8
Picfx: http://itunes.apple.com/us/app/picfx/id417563413?mt=8
Pocket Portfolio: http://itunes.apple.com/us/app/pocket-portfolio/id419455189?mt=8
Snapseed: http://itunes.apple.com/us/app/snapseed/id439438619?mt=8
Accessories:
Diff (case): http://www.diffcase.com/DiffCase.html
Glif (tripod access): http://www.studioneat.com/products/glif-for-iphone-4
Gymbl (iPhone Tripod): http://www.youbiq.com/
iPik (case): http://www.ipikcase.com/
iPro Lens: http://iprolens.com/
the joy factory (Rain Ballet): http://www.thejoyfactory.com/rainballet-iphone-4-waterproof-case-with-in...
kogeto (dot lens): http://kogeto.com/dot.php
mCam: http://www.almlive.com/store/
Modahaus (Steady Stand): http://www.modahaus.com/store/steady-stand-200/
Mophie Juice Pack Plus (iPhone4/4s): http://www.mophie.com/mophie-juice-pack-plus-iPhone-4-battery-case-p/116...
Mosy Mount (tripod): http://www.mosymount.com/
olloclip (tripod access): http://www.olloclip.com/
Photojojo: http://photojojo.com/store/
pixeet (app/lens): http://www.pixeet.com/
snapmount: http://snapmountforiphone.com/
sites, blogs and reference material:
1197.is: http://1197.is/
the App Tutor: http://theapptutor.com/
Chase Jarvis: The Best Camera – Book: http://www.amazon.com/Best-Camera-One-Thats-You/dp/0321684788/ref=sr_1_1...
EyeEm: http://www.eyeem.com
eyephoneography: http://eyephoneography.com/
FiLMiC Pro: http://www.filmicpro.com/
Flickr – iPhoneography: http://www.flickr.com/groups/iPhonephotography
Instagram: http://instagr.am
Instatips: http://instatips.tumblr.com
iPhoneArt: http://iphoneart.com
iPhone Camera Essentials: http://iphonecameraessentials.com/
iPhone Obsessed (Book/App): http://marcolinaslate.com/iphoneobsessed/
iPhoneogenic: http://iPhoneogenic.tumblr.com
iPhoneography (Glyn Evans): http://iphoneography.com
iPhoneorgaphyCentral: http://iphoneographycentral.com/
iShowcase Vol.1 (App): http://itunes.apple.com/us/app/ishowcase-vol.01/id409042603?mt=8
iShowcase Vol.2 (App): http://itunes.apple.com/us/app/ishowcase-vol.02-w/id455932142?mt=8
Just What I See: http://www.justwhatisee.com/
Life in LoFi (Marty Yawnick): http://lifeinlofi.com
LoFi MODE: http://lofimode.com/
MobiTog: http://mobitog.com
Mobile Photo Group: http://www.mobilephotogroup.com
Mobile photography awards: http://www.mobilephotoawards.com
p1xels: http://pixelsatanexhibition.com
Tiny Tutorials:http://www.danburkholder.com/Pages/main_pages/tutorials_main_page.htm
What I See Now: http://www.whatiseenow.com
Your Camera Loves You (eBook): http://www.peachpit.com/store/product.aspx?isbn=0132776308 -
PMON: terminating instance due to error 471. database down
Linux ES 2.6.9-78.0.5.EL #1 Wed Sep 24 05:29:49 EDT 2008 i686 i686 i386 GNU/Linux
oracle 10.2.4
Intiall version is 10.2.0. we have same problem in old version of oracle 10g. yesterday I have upgarded into 10.2.4.
still the database is down due the following error . Please let me know the issues
ue Aug 25 19:16:28 2009
Errors in file /opt/app/oracle/admin/Test/bdump/test_pmon_20000.trc:
ORA-00471: Message 471 not found; No message file for product=RDBMS, facility=ORA
Tue Aug 25 19:16:28 2009
PMON: terminating instance due to error 471
Instance terminated by PMON, pid = 20000
Wed Aug 26 10:22:11 2009In the trace file
4AE1A660 00000000 00000000 6361726F 0000656C
4AE1A670 00000000 00000000 00000000 00000000 [................]
4AE1A680 00000000 00000000 00000006 662D6C76
4AE1A690 30396E69 742E6264 6F706972 2E746E69
4AE1A6A0 2E6D6F63 00007561 00000000 00000000
4AE1A6B0 00000000 00000000 00000000 00000000 [................]
4AE1A6C0 00000000 00000000 00000000 0000001A [................]
4AE1A6D0 4E4B4E55 004E574F 00000000 00000000 [UNKNOWN.........]
4AE1A6E0 00000000 00000000 00000000 00000000 [................]
4AE1A6F0 00000008 30303032 00000036 00000000 [....20006.......]
4AE1A700 00000000 00000000 00000000 00000005 [................]
4AE1A710 6361726F 7640656C 69662D6C 6430396E
4AE1A720 72742E62 696F7069 632E746E 612E6D6F
4AE1A730 44282075 29305742 00000000 00000000
4AE1A740 00000028 00000002 00000000 00000000 [(...............]
4AE1A750 00000000 00000000 00000000 00000000 [................]
Repeat 8 times
4AE1A7E0 00000000 00000000 00000000 00000200 [................]
4AE1A7F0 00000000 00000000 00000000 00000000 [................]
4AE1A800 4AF80EE4 4AE1ADC0 4AE1A248 00000000 [...J...JH..J....]
4AE1A810 4A045AA4 00000000 00000000 00000000 [.Z.J............]
4AE1A820 00000000 00000000 00000000 00000000 [................]
4AE1A830 4AE1A830 4AE1A830 00B80000 00B30000 [0..J0..J........]
4AE1A840 000450D1 00043DC5 016F9355 00000000 [.P...=..U.o.....]
4AE1A850 00000000 00000000 00000000 00000000 [................]
4AE1A860 00000000 00000814 00000000 00000088 [................]
4AE1A870 00000000 00000814 00000000 00000000 [................]
4AE1A880 00000000 00000000 00000000 00000000 [................]
Repeat 3 times
4AE1A8C0 FFFFFFB6 00000006 [........]
error 471 detected in background process
ORA-00471: Message 471 not found; No message file for product=RDBMS, facility=ORA
Edited by: user8680248 on 25/08/2009 18:53 -
I have Oracle 9.2.0.5 running on Windows 2000 SP4. After a cluster failover, the DB will not start and has following messaeg at end of alert log. Any suggestions how to solve the issue?
Database Characterset is WE8ISO8859P1
Failure to extend rollback segment 1
FULL status of rollback segment 1 set.
Failure to extend rollback segment 1 because of 1562 condition
Wed Oct 20 19:48:59 2004
Errors in file r:\oracle\admin\ariesprd\udump\ariesprd_ora_3068.trc:
ORA-01562: failed to extend rollback segment number 1
Error 1562 happened during db open, shutting down database
USER: terminating instance due to error 1562
Wed Oct 20 19:49:00 2004
Errors in file r:\oracle\admin\ariesprd\bdump\ariesprd_pmon_2972.trc:
ORA-01562: failed to extend rollback segment number
Instance terminated by USER, pid = 3068
ORA-1092 signalled during: alter database open...Thanks Eric, problem solved
Regards
Srinivas -
Database Down after Server Reboot
Hello
I am getting a weird problem after I reboot my server (windows 2003) where by my database (10.2) does not automatically start. To get it to start I have to go into administrative tools >> services and then manually restart the OracleASMService+ASM (it says it is already running).
Thanks in advance for any Idea's/suggestionsRight;
After rebooting the server and lauching the OEM Database Control it tells me the following:
- Database Instance = Down
- Listener = Up
- Agent Connection to Instance = Failed ORA-12505: TNS:Listener does not currently know of SID given in connect descriptor(DBD ERROR: OCIServerAttach)
In response to your troubleshooting suggestions;
1. alert.log has no new errors logged in the past week
2. As far as I can tell, yes. It says the service (and other associated oracle services) are running
3. No I can not connect to the database with sql*plus (before I restart the OracleASMService+ASM). SQL*Plus errors:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
After I restart the service I can connect without any problems.
4. N/A
I appreciate any help you can offer on this matter.
Regards
Toby -
I am new to the Data Guard process and i wanted to know the following:
I have a 9i Primary DB that ships to a Logical Standby Database, however if the logical standby database goes down for whatever reason, (hardware failure) it is unreachable, what can I configure to alert me that the has occurred?
Is it something on the Primary DB that alerts me that the redo logs are perhaps not being processed? Does one use the Dead Connection Detection parameter SQLNET.EXPIRE? How do I identify the Primary to Standby connection is down amongst so many user connections?
Many Thanks
AMYou will have an error for the archive log destiantion that is for your standby
For like 10g or 11g using a SYNC or ASYC the logwr reports the issue the archiver process will report same as well.
LGWR: Error 1041 disconnecting from destination LOG_ARCHIVE_DEST_2 standby host 'testsb'
so for your archive destination for you standby look for errors to the destination and then alert. -
Urgent Database Down - alert log file
Hi Guru's
this is the alert log file - today morning production database went down - any one can you please let me know the problem area!
Thread 1 advanced to log sequence 17563
Current log# 4 seq# 17563 mem# 0: E:\ORACLE\ORADATA\PNLDB\REDO04.LOG
Thu Jan 26 08:12:56 2006
KCF: write/open error block=0x7f0bc online=1
file=12 F:\ORACLE\ORADATA\PNLDB\USERS02.DBF
error=27069 txt: 'OSD-04026: Invalid parameter passed. (OS 520380)'
Thu Jan 26 08:12:57 2006
Errors in file f:\oracle\admin\pnldb\udump\pnldb_ora_1420.trc:
ORA-01115: IO error reading block from file 12 (block # 517514)
ORA-01110: data file 12: 'F:\ORACLE\ORADATA\PNLDB\USERS02.DBF'
ORA-27091: skgfqio: unable to queue I/O
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 517513)
ORA-01115: IO error reading block from file 12 (block # 132287)
ORA-01110: data file 12: 'F:\ORACLE\ORADATA\PNLDB\USERS02.DBF'
ORA-27091: skgfqio: unable to queue I/O
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 132286)
Thu Jan 26 08:12:57 2006
Errors in file f:\oracle\admin\pnldb\bdump\pnldb_dbw0_956.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 12 (block # 520380)
ORA-01110: data file 12: 'F:\ORACLE\ORADATA\PNLDB\USERS02.DBF'
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 520380)
DBW0: terminating instance due to error 1242
Thu Jan 26 08:12:59 2006
Errors in file f:\oracle\admin\pnldb\udump\pnldb_ora_1420.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-01115: IO error reading block from file 12 (block # 517514)
ORA-01110: data file 12: 'F:\ORACLE\ORADATA\PNLDB\USERS02.DBF'
ORA-27091: skgfqio: unable to queue I/O
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 517513)
ORA-01115: IO error reading block from file 12 (block # 132287)
ORA-01110: data file 12: 'F:\ORACLE\ORADATA\PNLDB\USERS02.DBF'
ORA-27091: skgfqio: unable to queue I/O
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 132286)
Thu Jan 26 08:12:59 2006
Errors in file f:\oracle\admin\pnldb\bdump\pnldb_pmon_3804.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Instance terminated by DBW0, pid = 956
Thanks
RaviYou are having problems on disks E\ and F\ - possibly hardware problems.
(Hopefully these disks are not network drives. If they are, your problem might be network contention. Network mounted drives are never a good idea for databases.)
If this is truly urgent, then I encourage you to use your Oracle Support contract to open a service request for assistance. -
Database Down - URGENT!!!
Dear Oracle Guru's
Database is down. Please advise!!
It's urgent, tell me what to do!!Please, can you provide the password for the same. I have no access. It is very urgent to fix!!It's a personnal things, you know... passwords?
Try the usual ones:
change_on_install, manager, password, oracle, you_wife_name, your_child/dog/cat_name, ...
Maybe you are looking for
-
Hi, Currently we have a huge folder with allot of pdf files in it and we are running an index service on it. The index service is used on a couple of web sites that searches inside the documents for key words. It works fine with pdf's,word etc. We re
-
Date half a year from now, how to create?
How can I create a Date () instance which resembles half a year, or 2 months or a year or a day etc. etc. from now? Thanks!
-
More Automation questions.....
Ok guys, My "Quick Access Automation" controller just stopped working ...out of the blue?????!!!!!! So I have set up my mod-wheel to be my quick-access controller.......So whatever automation is showing, will be controlled by mod-wheel...... I have a
-
FRM-40815: Form Error, using CUSTOM.pll
Hello, I am trying to customize WIP Lot Transactions Oracle Standard Form using CUSTOM.pll. Upon navigating to one of the 3 blocks in the form(RESULTING_LOT), I am getting following error message: "FRM-40815: Variable GLOBAL.CLRREC_NOVALIDATE does no
-
after i plug my ipod touch 4g to the battery of my motorcycle using invented charger it 'reads battery charging is not supported with this accessory'...after a while my battery get empty and when I charge it using original apple charger it won't char