Receiver determination based on the filename of the incoming xml file

hi folks,
is it possible to base the receiver determination from the filename (pattern) of the incoming xml file?
suppose, if the filename is partner1.xml, then the receiver determination has a condition of partner1. in this case, the message is received by partner1.
any advise please?
thanks!
-lex

Hi Lex,
You can use Enhanced Receiver Determination for this. Do your normal mapping from source to target. And another mapping for the receiver determination. In that mapping you can use the UDF for Dynamic Configuration and set the filename as the receiver service name.
Use the following blog for Enhanced Receiver Determination:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
This blog explains the usage of Dynamic Configuration:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Sanjeev.

Similar Messages

Retaining the FileName in the Receiver FTP adapter

Hi experts,
I have a situation here, were i need to retain the FileName in the message header in the receiver FTP adapter.
I have tried using variable subtitution but seems the FileName is not supported in variable substitution.
Please help
Thanks

Hello,
if you need file name to be retained in the receiver adapter from the sender side. then u can do that by dynamic configuration using adapter specific message attributes, check this blog for details-
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
if you dont have a mapping in your interface to use dynamic configuration, then you can do it via adapter module also- have a look here, /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
regards,
francis

I need to start and stop logging based on a digital input event(or analog if necessary), log data for several seconds prior to the event, and have the data file close at the end of event and increment the filename for the next logging event.

I don't know if this can be done with VI Logger or need to use Labview V7.1.

After browsing through the VI Logger User Manual, it looks like the triggering that you are hoping to accomplish is possible. However, incrementing the filename for the next logging event is not going to be possible. VI Logger does exactly what its name tells - logs data. I don't think the automation that you are hoping to accomplish is possible.
For help with setting up your application, if you do choose to stay with VI Logger, make sure to chek out the Getting Started with VI Logger Manual.
Best of luck.
Jared A

Receiver determination based on target msg???

Hi All,
Is it possible to do a receiver determination based on some field present in target msg. I know I can do the same if the field is present in source msg with the condition editor in receiver determination. But this will not help my scenario. I need to find the receiver based on a field in target msg. Is it possible?? If so, can u pls explain it???
Thanks & Regards,
Jai Shankar.

Jai,
Am on Sp14 and have not had the chance to try it out.
but, <b>I dont think you will need a extra Receiver Determination for the Enhanced Receiver Determination.</b>
What I understood out of that blog was that the Interface mapping between Source Interface and Receiver Interface will determine the receiver. So, you fill in the reciver service field with the actual receiver and this value will be taken as the receiver.
The Receiver Interface will be taken from the SAP basis SWCV.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
Regards,
Bhavesh
Regards,
Bhavesh

Processing the filename in the payload

Hi,
I am getting the filename in the payload, I want to read that file.
How do I achieve this..
Regards,
Varun

Hi,
For Example if we want to get the Input file name & Directory Details into Target message.
Ex:
I/P File name is :::::231004.xml Ftp Serve Path : //xideveloper/Test_XI/PO
O/P File name can be :::Any thing
Input File : 231004.xml
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_TEST_AGCO xmlns:ns0="http://tafe.test.com">
   <Header>
      <NAME>giri</NAME>
   </Header>
</ns0:MT_TEST_AGCO>
Output File : Out.xml
Here in this output we are able to get the Filename & Directory Info in the FileName_1 Field.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_target xmlns:ns0="http://test.com">
- <Header>
<Name_1>giri</Name_1>
<File_Name_1>231004.xml //xideveloper/Test_XI/PO/</File_Name_1>
</Header>
</ns0:MT_target>
You should capture the Source File name & Directory Info into Target Message.
1)     Write One UDF & Map Like Constant(u201Cu201D)---UDF----FileName_1
2)            In Advanced mode check the check box Set Adapter-Specific Attributes
3)     Check the ASMA Parameters in Sender Adapter Alone
4)             No need to check the check box ASMA in the receiver side
UDF Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//for getting filename
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//for getting directory
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
/similarly for getting filetype, filesize you need to specify in the above code instead of filename or directory/
String FileName = conf.get(key1);
String Directory = conf.get(key2);
String Cat = FileName+ " "+Directory;
//return FileName;
//return Directory;
return Cat;
Regards
Seshagiri

How to get a dynamic receiver determination based on a table an SAP PI ABAP Stack

Hello folks,
currently I get stuck dealing with a problem about the receiver determination. Let me first describe the Problem: We are using to different SAP ERP- backend system in our test enviroment. But only of this systems is marked as current "actuall" test system. Every once in a while we need to switch between these two systems and mark the other one as the actual test system.
This is the point were it get's a little bit time consuming for me: We have about 50 interfaces were I need to change the receiver from test system A to test system B or vice versa. So I thought about creating a more dynamic way to determine the actual test system:
Therefore I have created a table on the ABAP stack of our PI (7.31 double stack) with just one field that holds the current test system. Now I would like to create a dynamic receiver determination where I call the RFC-function RFC_READ_TABLE. But how can I acess a table from the grapchical mapping of the pi which is stored on the PI?
Is there mybe another fundamental way to retrieve the actuall test system within the mapping?

You can go for enhanced receiver determination, where in you can determine the receiver system using a graphical mapping.
Now in that graphical mapping, use the standard function " RFC Look up" and make a call to bapi and get the actual receiver system.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40b64ca6-b1e3-2b10-4c9b-c48234ccea35?QuickLink=index&…
Step by Step guide to Explain Enhanced Receiver Determination - Application Server Infrastructure - SCN Wiki

How to get the filename of the active jsp page?

how can i get the filename of the active jsp page?

You could register the JSP [ages in the web.xml and then use the ServletConfig.getServletName.
You could use the JspContex.getServletName which will return the registered name or the name of the servlet class.
You could programmatically add a page context attribute that holds the jsp page name

How to see the filename of the photos available in the iphone without downloading them or connecting to any other device

I am unable to find the filename of the photos available in my iphone 5. How should i get that?

You can't view that on the iPhone natively.
You can, however, import the pictures to your PC or Mac and view the file names there. They should be in the IMG_XXX format.

I need a script that copies the filename into the file

I need a script that copies the filename into 4th column of each line in the text doc file.
I have over 2000 different file names each containing 6 columns and ~50-100 rows.
I can do this manually using this script:
awk '{print $1"\t"$2"t\"$3"\t <name> \t"$6}'
But I would like an automation command or script. Is there any command that I can use instead of <name> that will copy the filename into the column?
Thanks
Monica

Oops, I forgot the redirect to a file. It's not a good idea to edit files in place. A script could fail and you're left with at least one file ruined. It's better to create new files then delete the old files.
for file in *; do
    while read col1 col2 col3 col4 col5 col6; do
        printf "%s\t%s\t%s\t%s\t%s\n" $col1 $col2 $col3 $file $col6
    done < $file > n$file
done
You could narrow the files listed such as
for file in *.tsv
and redirect the new files to another directory. Such as
done < $file > /absolute/path/to/directory/$file

Get only the filename not the full path of the file.

hi to all..
how can i get only the filename of the file not the full path and to be placed on a textinput.?
example:
when i'browse the file and select sample.txt
"C:\Users\user\Desktop\folders\sample.txt" this will be inputted on the textinput.
however, what i want to have is when i'browse and select a file..
textinput should only contain "sample".
does anyone knows how to do it?

Hi cyrus@adobe,
How are you getting the full path of the file when you browse, I dont think for security reasons the Flash Player will aloow to do so. You can only get the file name not the full path of the file when you browse.
Are you using Flex4..?? I am not sure whether this is possible in Flex4..However if you are getting full path and if you wanted to show only the filename then you can just use theString class split function to acehive this..
var fullPath:String = "C:\Users\user\Desktop\folders\sample.txt";
var splitPath:Array = fullPath.split("\");
textInput.text = splitPath[splitPath.length-1];
Thanks,
Bhasker

Is there a possibility to print the filename into the picture?

Is there a possibility to print the filenames into the picture or into the slideshow? When presenting photos to clients over Apple TV there must be a way to find the image name for ordering.
Any ideas, I did not find anything!

Unsure about slide show in Ap, but when printing llok for this dialogue box, it prints any metadata;
You just need to select the more options bottom left.
Tony

Writing the filename as the prefix for bates or page numbering during batch process. PRO 9

While batch processing in Acrobat PRO 9 I am trying to insert the file name as the prefix automaticily either for page numbering or bates labeling.
Not very good with javascript. Any one have any ideas?
Everyone is always asking to have the filename as the prefix and it starts to wear on you after 1000 exhibits.

Don't know what script you're using, but this command will return the document's file name:
this.documentFileName
and this one will return the full path:
this.path

Grabbing the filename of the document a dynamic stamp is being placed into.

I need to get the filename of the "parent" document a stamp is being placed into to put into one of the stamps textfields. This was what I was hoping would work inside of stamps textfield custom calculation:
event.value = app.activeDocs[0].documentFileName;
Thats a no go. For some reason activeDocs is always empty, despite the fact I have 3 pdfs open. Does anyone have any ideas on why this is not working? Have a better idea to do the same thing?
Thanks for your help.

Thank you! Works great.
And for those looking for the quick answer in the future:
event.value = event.source.source.documentFileName;

How to get the attribute value of an XML file??

How to get the attribute value of an XML file??
For example, how to get name and age attributes?
<student name="Joe" age="20" />

What are you using to read the XML file??
On the assumption of JDOM - www.jdom.org. Something along the lines of:SAXBuilder builder = new SAXBuilder(true);
Document doc = builder.build(filename);
Element root = doc.getRootElement();
List children = root.getChildren();
Element thisElement = (Element)children.get(n);
String name = thisElement.getAttributeValue("name")
try
int age = Integer.parseInt(thisElement.getAttributeValue("age"));
catch (Exception ex)
throw new InvalidElementException("Expected an int.....");
}Ben

[svn] 3025: Add libs/player/ 10 directory to the library path in the team apps flex-config.xml file.

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

Receiver determination based on the filename of the incoming xml file

Similar Messages

Maybe you are looking for