Receiver does not work

My phone's receiver doesn't work.This is factory error.Can I change?How much take?

EnverTr wrote:
My phone's receiver doesn't work.This is factory error.
Based on what?
EnverTr wrote:
Can I change?How much take?
Take it to Apple or the authorized service provider in your country for evaluation.  They will tell you how much it will cost, if it is in fact a hardware issue.

Similar Messages

  • LIRC(serial receiver) does not work.

    Hello,
    i have a PINNCALE Systems Serial IRC receiver, but i don't get it to work.
    [12187.956765] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned.
    [12187.960012] lirc_serial: port 03f8 already in use
    [12187.960018] lirc_serial: use 'setserial /dev/ttySX uart none'
    [12187.960022] lirc_serial: or compile the serial port driver as module and
    [12187.960026] lirc_serial: make sure this module is loaded first
    I have tried to release it with setserial, but it doesn't change anything.
    setserial /dev/ttyS0 uart none
    This error comes when i try to load the kernel modul:
    modprobe lirc_serial
    FATAL: Error inserting lirc_serial (/lib/modules/2.6.38-pae/kernel/drivers/staging/lirc/lirc_serial.ko.gz): Device or resource busy
    kind regards

    This error comes when i try to load the kernel modul:
    But what does dmesg say after this? It should give an explanation I would hope.
    Also you are sure ttyS0 is where you receiver is? By the way I start this lircs service before the lircd service in rc.conf
    #!/bin/bash
    # Releases ttyS0 and loads the lirc_serial module
    # - serial support is built into Arch kernel26
    . /etc/rc.conf
    . /etc/rc.d/functions
    case "$1" in
    start)
    stat_busy "Releasing ttyS0 COM port"
    /usr/bin/setserial /dev/ttyS0 uart none
    /sbin/modprobe lirc_serial
    # Could be needed to stop treating the remote as a keyboard
    #echo "lirc" > /sys/class/rc/rc0/protocols
    stat_done
    stop)
    stat_busy "Unloading LIRC Serial module"
    /sbin/rmmod lirc_serial
    stat_done
    restart)
    $0 stop
    $0 start
    echo "usage: $0 {start|stop|restart}"
    esac
    exit 0
    Just a note for other readers who could have troubles with lirc_serial, my receiver does not work currently, Lirc can't detect it and developers can't fix it. Last lirc where it worked was 0.8.0, on another distribution.
    Edit: I forgot to tell you how to increase verbosity of lirc_serial, this is an excerpt from my modprobe.conf:
    # Set custom options
    #options lirc_serial irq=4 io=0x3f8 sense=1 debug=1
    # Only increase verbosity
    options lirc_serial debug=1
    Last edited by anrxc (2011-05-18 21:31:06)

  • 1KEK Transfer payables/receivables does not work

    Hello all,
    The 1KEK report does not work. Though it says "data was copied from co code" it does not reflect in the PCA reports. Nor does it show any log. No document is created.
    Are there any config settings to make this happen ?
    We have new GL but documnet split is not activated and we don't want to. We want to use classic PCA to derive Balance sheet.
    Thanks
    Sandeep

    Dear Sandeep,
    Did you execute transaction F.5D. If NO then execute.

  • My voicemail does not work on my iphone 5, not receiving messages that leave me

    my voicemail does not work on my iphone 5, not receiving messages that leave me

    any person who will do the same, I communicate with at & t and nothing to do (I left messages in my mailbox I did not receive, nor the iphone notify me

  • Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued  The Adobe Support Advisor tool was used to analy

    Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued  The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

    Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
    Mylenium

  • The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

    The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

    I found this plugin which solved pretty much all of my mail font rendering problems.  It is designed for Lion, so don't know whether it will work but thought I would offer it up.
    http://noware-it.zxq.net/

  • My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

    My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

    Try perform below steps.
    Open task manager by pressing Ctrl + Shift + Esc  keys. Click on more details if the option available.
    Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
    Then hold windows key on your keyboard and Press R key.
    It will open Run window
    In Run window, type Appdata and click on Ok
    Open Local > Adobe folders
    Delete AAMUpdater and OOBE folders
    Then navigate to C:\Program Files (x86)\Common Files\Adobe
    Delete Adobe Application Manager and OOBE folders
    Go back to Program Files (x86) and Open Adobe folder
    Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
    Download and install Creative Cloud App from below link
    https://creative.adobe.com/products/download/creative-cloud
    Then check

  • HT201412 Slide to unlock does not work no matter what we try. Phone receives calls and messages but we cannot answer either because the phone will not respond

    iPhone 4s: Slide to unlock doea not work. Phone receives calls and messages but we cannot answer. We have tried numberous times to turn on/off to no avail.

    It sounds like your phone is broken.

  • I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
    This is a known issue with Yahoo email account.

  • I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages

    I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages. ISP says everything is active on their side. I have just upgraded from Samsung with the same phone number and services. Help?

    Hi cggturner,
    I'm sorry to hear you are having issues with iOS 8.1. If you are still having issues with Caller ID and SMS Messaging, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Troubleshooting Messages
    Regards,
    - Brendnen

  • Adobe Create PDF Desktop Printer does not work, receive error mail

    the program to print adobe does not work. does not print from the internet. txt file does not print. Word does not print. does not send the documents to print and the e-mail always arrives unsupported file. impossible because there are the list of file types that I want to print. fake

    Hi Pleso
    Can you login to this website https://createpdf.acrobat.com/signin.html using same account?
    Please email me directly at [email protected] and we can do a online session to troubleshoot this issue.
    Thanks
    -sarabjit

  • HT201359 Paid for item on a game, got a receipt for payment, never received what i paid and the link to payment screen from itunes does not work

    Paid for an item on a game, cost 55.00 quid, moneys out of my account yet what i paid for i have nothing.
    On the email that was sent to me via itunes, the link does not work to discuss the problem.
    Any help please would be great, cheers

    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • ICloud on my iPad does not work in iOS 8

    Hi all,
    I have a problem with iCloud after upgrade to iOS 8 on my iPad. I have updated from IOS 7 to 8 without turning on the iCloud Drive feature (because of the Mavericks on my Macbook Pro in that time).
    Applications like “Pages”, “Numbers”, “MindNode Pro” or “Textastic” (and it seems that all applications using documents in iCloud) stopped working. For example MindNode Pro tells me that "iCloud is not configured on my device”.
    I have tried turning off/on iCloud, resetting the device and the problem is still there - I am not able to access my iCloud documents on my iPad (the Mac OS X versions of the apps works fine). I have upgraded to Yosemite, so I have also turned on the iCloud drive hoping that it will solve the problem… it does not :-(
    Maybe there is some problem with my account, because the Family sharing behaves strange (it created all the calendars, memos, photo streams, etc. twice), and there is a big issue with ENABLING the iCloud DRIVE - this process NEVER ENDS — When I turn the iCloud Drive “on” on my iPad the window with “Turning On iCloud Drive…”. Even after few hour of waiting, this window does not disappear. I can close the preferences app and continue to work with other apps, but the problem with documents in iCloud remains.I have tried hard-resetting my iPad, turning off/on my iPad, disconnect it from my apple id a login again, reinstalling the applications and nothing helps. I am currently running the latest iOS version.
    Another strange thing (maybe related to this problem) is, that in Yosemite I cannot se all the folders in my iCloud drive, here is an example from my Finder:
    Here from MindNode Pro (Mac OS X version) - notice that it is able to open its folder, which is not listed in the iCloud (see above):
    This is what I can see through the icloud.com website (there are items which are not listed in the Mac OS X):
    So, I think that my iCloud is probably in some inconsistent state...
    I am not able to find any Apple support email - I have tried [email protected], but it does not work (email returned with message "this email address aren’t monitored”).
    Zdenek

    Here's a better version:
    When I try to initiate or receive a call via Sony MDR-EX100iP headphones/mic (that worked perfectly with iOS 6 and iOS 7), on iPhone 4S running iOS 8, I hear crackling static and the person on the other end of the line can't hear me.
    I suppose that because I can make a hands-free call using the Apple headphones/mic, Apple will tell me that there's not an issue.  However, the Sony MDR-EX100iP headphones/mic worked much better for me than the Apple headphones/mic, so I'm in a bit of a quandry...
    BTW - It's really lame that you can't delete or even edit a posting once you submit it...

  • Voicemail does not work after update

    I completed the new update yesterday and received a voicemail this morning. I tried to access it but operator says that the person I am trying to call does not subscribe to voicemail.

    What specifically does not work?  Any errors?
    If you want/need help, provide specifics of the issue.  We are not mind readers.

Maybe you are looking for