Receiver File adapter : No of write attempts

HI
i am doing a idoc to file scenario,
it is working properly, In Case i had blocked( Read /write option deny) the target folder , where the target file is generating.
Than how many times the XI Adapter will try to write the file in the blocked target folder. my problem is linked with the ALert multiple mails
Getting Multiple mails - Alert configuration
Regards
Ajay Pant

Hi Ajay,
Yes your are right, it will try three times and then Message will go in System Error. The retries and time interval can be changed from the Visual Admin...
In ther services...you can find an option called XI adapter..there u can see no. of
retries =3 and time intercal is 5 min (60000 ms).
But if you increase this time intercal it will be applicable for all the interfaces..
Thanks & Regards,
Farooq Farooqui.

Similar Messages

Receiver File Adapter doesn't write file but no error appers.

Hi all,
we have a simple scenario that was working fine. It receives a message from R3 and writes a file. Now the file is not being created, no error appears at Integration Engine message monitor, I only see at RWB Message Monitor that the message is in state "Holding..."
Anybody knows where can I check to find errors?
Thanks in advance,
Diego.

Hi Diego,
Please check if the adapter status is Active and the changes are activated.
Thanks
Gaurav

XI3.0 Receiver file adapter write to windows shared drive

Hi,
Our XI server SP09 currently runs on windows 2003 server, I wish to use the receiver file adapter to create a file on another windows server. I have created a folder on the other server and set permissions so that anyone can read and write to it.
The communication channel has been set-up with a target directory of //server/shared_folder/folder and a transport protocol of 'File system(NFS)'
When I try and send an XML message to the file adapter I get the following error on the runtime workbench :-
Last message processing started 09:47:10 2005-06-09, Error: Message processing failed with java.lang.Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
My questions are as follows :-
a) Do I have the target directory on the communication channel set-up correctly? i.e. do I use / or \
b) What username will need to be set-up on the other server so that the file adapter can write to the shared folder
c) Is there another way of providing user and password information for connecting to the other server?
Many thanks
Ian

Hi Ian
as i understood from ur description is that u want ur file to b generated in some other machine then u have to mention that machine in ur SLD using correct specification..
u go thru this link in order to get more Clearance..
http://help.sap.com/saphelp_nw04/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Hope this ll help u.
Regards
Shailesh

Receiver File Adapter Not Executing OS Command

Hello All!
We are currently running PI 7.1 and wish to use a Receiver File Adapter to FTP a file to a mainframe and override the FTP system defaults.
Tried using the 'quote site recfm=fb lrecl=80' OS command but discovered that this would not work as the Adapter Engine is NOT on the mainframe.
Regrouped a bit and made a second attempt which involved writing a Unix script to ftp a file and override rthe system defaults. The idea was to use the File Adapter to FTP the data to the server, invoke the script and get the file to the mainframe with the proper attributes. The script when executed on the server works perfectly.
However, when the IDoc comes thru PI, the File Adapter ftp's the file ok but the script is never executed.
Any ideas why this is so or any suggestions?
Thank you.

Hi Ken,
Script only executes at Network File sharing (NFS) only. It dont work at FTP level.
So you can better write the file on NFS and then within the script to connect to ftp and do your processing.
Regards,
---Satish

Receiver File Adapter - FTPEx: 550 Access denied

Hi Experts,
In my receiver file adapter scenario I'm getting 550 Access denied in RWB.
I am a little confused here because I could access the FTP client from my desktop using the same User and Password informed in the Receiver CC. I also could drag and drop a file there.
Here you have Detail Display in RWB, it seems that at least the user is working fine for PI also:
Success: Connecting to FTP server "<FTP IP>"
Success: Write to FTP server "192.168.10.85", directory "\Transportadoras\10326750000101\", file "Nfe_teste.xml"
Success: Transfer: "TXT" mode, size 8881 bytes, character encoding UTF-8
Error: Attempt to process file failed with An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Regards,
Daniela
Edited by: Daniela Machado on Aug 11, 2010 10:18 PM

Hi Daneial,
This is an issue due to any firewall or proxy between your Xi system and the FTP.In this case the direct logon
works with same user but when XI tries to create file at runtime you get this error due to network issues.
To resolve this contact your Basis/Network guys and
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards,
$rinivas

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1 swap.keyName payload-name
1 swap.keyValue MailAttachment-1
RECEIVER FILE MODULES
1 localejbs/AF_Modules/DynamicConfigurationBean Local Enterprise Bean 1
2 localejbs/CallSapAdapter Local Enterprise Bean 2
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
 private static final long serialVersionUID = 7612238514043673502L;
 private SessionContext myContext;
 private MessagePropertyKey myFileName;
 public void ejbRemove() {
 public void ejbActivate() {
 public void ejbPassivate() {
 public void setSessionContext(SessionContext context) {
 myContext = context;
@throws CreateException
 public void ejbCreate() throws CreateException {
 public void getMessageProperty(MessagePropertyKey FileName) {
 myFileName = FileName;
@param moduleContext
 Contains data of the module processor that might be important
 for the module implementation such as current channel ID
@param inputModuleData
 Contains the input XI message as principal data plus eventual
 set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
 response message if the module is the last in the chain.
@exception ModuleException
 Describes the cause of the exception and indicates whether
 an retry is sensible or not.
 @SuppressWarnings("deprecation")
 public ModuleData process(ModuleContext moduleContext,
 ModuleData inputModuleData) throws ModuleException {
 try {
 Message msg = (Message) inputModuleData.getPrincipalData();
 TextPayload payload = msg.getDocument();
 String contentType = payload.getContentType();
 // Content Type could be something like
 // text/plain;charset="UTF-8";name="file.txt"
 contentType = contentType.replaceAll("\"", "");
 int i = contentType.lastIndexOf("=") + 1;
 String fileName = contentType.substring(i);
 msg.setMessageProperty(myFileName, fileName);
 inputModuleData.setPrincipalData(msg);
 } catch (Exception e) {
 return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14 Information Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14 Information Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14 Information Swap: successfully swapped
2009-02-04 11:41:14 Information Mail: message leaving the adapter (call)
2009-02-04 11:41:14 Information The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14 Information Backward validation is enabled
2009-02-04 11:41:14 Error Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

Receiver File Adapter - Adapter Engine

I am able to read files using Sender File Adapter. But when I try to write a file using Receiver File Adapter I get the following erro:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="<http://sap.com/xi/XI/Message/30>" xmlns:SOAP="
<http://schemas.xmlsoap.org/soap/envelope/>" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.exi.usxid</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration
Server is.00.usxid</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password)
for the Adapter Engine af.exi.uswalexi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I tried executing the function module SAI_AE_DETAILS_GET but I am not getting the error URL Not found. This was working in the past. We upgraded to SP15 this showed up again.
Any help appreciated.

I'm working on integration of SAP with 3rd party application. While sending data from SAP to XI, i'm getting the following error which i've found in sxmb_moni (XML Message->Call Adapter).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- -
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xp1.sapxi</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration Server is.00.sapxi</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xp1.sapxi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Plz help me to solve this issue. If possible mail me the solution to my personal email-id [email protected]
Note:
1. We are using CIM 1.3
2. In XI Server Message Monitoring, i'm getting the System Error message in Integration Engine.
3. In Payloads, i'm getting the required information in XML format as desired.
Thanks in advance.
Regards,
Navaneeth.S

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
 //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
 if (!("".equals(Input)) )
 if (Input.length() > Size )
 Return_Value = Input.substring(0,Size);
 else
 Return_Value = Input.substring(0, Input.length());
 else
 for(int i = 0; i< Size ; i++)
 Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
 . // Create XML for each row and Marshal the object into to the String Buffer
 String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
 conf.put(KEY_FILENAME, strFileName);
 arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
 arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
 Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

The same filename from a sender to a receiver file adapter - SP14

Hi Expers,
I Have Gone through the link which is given bu Michal.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here My Questions are.........
1.Should we give any file name in the receiver side Adapter in this scenario.?????
2.How wil be the Sender and Receiver Communication channel Parameters????
What Are they???????
Please Clarify me...
Regards
Khanna

Hi Rajesh,
Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
Pls. do the following.
1. In the mapping program that you are using populate the filename coming from the source into the target root element.
2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
Note: You donot need to specify any filename in the receiver communication channel.
To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
You donot need to hard code the value of the filename in the file adapter for your interface.
In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
Thanks
Indranil

How to generate file name dynamically in receiver FIle adapter? Please help

Dear Experts,
 I have a scenario where I need to generate output file with the name dynamically pulled from the XI payload.
 In receiver File communication channel I don't see any option where we can specify the XML path for the file name.
 For example:
 If my inbound XML structure (inbound interface) is like below:
 <filename>file123.txt</filename>
 <RootNode>
 <Element1>Product123</Element1>
 <RootNode>
From this I need to pick the filename value and generate the output file with the same value.
How can I achieve this? Please help!
Thanks & Regards
Gopal
Edited by: gopalkrishna baliga on May 3, 2011 1:10 PM

Gopal,
You can use DynamicConfiguration class for this.
You need to write UDF for this and with input of filename you want to set and map this UDF to the top level node.
Refer the below famous blog from Micheal:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
You can also use Variable substitution to get value from payload, search SDN on this.
--Divyesh Vasani

OS Command for receiver file adapter

Hi Guys,
I have a requirement that in the target folder before putting the file, I have to rename the exisitng file then put the file. The target folder is in another machine and I have to use FTP option to send file.
is it possible to use OS command after processing option in the receiver file adapter to do this? please let me know how to handle this.
Thanks
Mukesh

Mukesh,
You cannot rename the file in the FTP folder. What you can do is write a OS script where it logs in into the FTP site and renames the file. Then use this OS script before message processing so that it renames the file before you write the actual file.
If you want to rename a file which is on the applicaiton server using NFS then you can directly rename it from the command prompt.
Regards,
---Satish

Repeating structure through the receiver file adapter

I wanted to ask wheter it is possible to create repeating structure through the SAP xi receiver file adapter. What I'm trying to accomplish is this:
Item1
Item2
Item1
Item2
(variable number of times).
I can accomplish the following:
Item1
Item1
Item2
Item2
What I could do is have the Item1 and Item2 fields in the same segment in the design time, but this would mean the file adapter would write all the items on a single line instead of two.
There is no way to define line breaks between the the receiver file adapter field parameters ?
There is no way to support nested structures in the recordset definition ie. Item1.Item2 ?

Henri,
What Vishal means is following:
Add sequences of the tag <recordset> between pairs of item1, item2:
<documentName>
 <recordset>
 <item1>
 <field-item1>column-value</field-item1>
 <field-item1>column-value</field-item1>
 <field-item1>column-value</field-item1>
 </item1>
 <item2>
 <field-item2>column-value</field-item2>
 <field-item2>column-value</field-item2>
 <field-item2>column-value</field-item2>
 </item2>
 </recordset>
 <recordset>
 <item1>
 <field-item1>column-value</field-item1>
 <field-item1>column-value</field-item1>
 <field-item1>column-value</field-item1>
 </item1>
 <item2>
 <field-item2>column-value</field-item2>
 <field-item2>column-value</field-item2>
 <field-item2>column-value</field-item2>
 </item2>
 </recordset>
</documentName>
A similar problem with header and items is in this thread:
Repeating structure through the receiver file adapter
Hope that helps,
Stefan

Receiver File Adapter Alerts.....

Hi Gurus,
I need to configure Receiver File Adapter specific alerts....to test the alerts ...i am just giving wrong credentials for FTP....
But..wot I c is that the alert is received after the predefined no. of retries(6 nos) in Comm Channel Monitoring are completed in an interval of 5 mins each..ie I am getting the alert after 30 mins...but if I stop the channel ..I get the alert instantly b4 the first retry starts......
Wot is the diffence btw the 2 cases???

The behavior is perfect.
When Adapter tries to send the message to target and if some error with channel parameters or target system then the processing will be marked as error only when all the retries are done....in your case after 6 attempts....this can be configured.
However when you stop the channel the message is not passed from IE to AE and you get the error in first instance itself....you might get the error information in SXMB_MONI....there is no retry limit for this part...it will be tried only once
The first alert is due to error in AE and the second error is due to error in IE
If you want to get the alert if first retry itself is in error then configure the retry interval to 1.
Regards,
Abhishek.

Attachments for receiver file adapter

Hello gurus,
I think receiver file adapter does not support attachments. But I do have a scenario where I receive additional files as SOAP payloads accompanying the request message and I have to write them to a network directory. How can I achieve this?
Regards,
Gökhan

Hi Gokhan,
Please have a look at the following links and see if it helps
Re: File adapter with attachment to mail
Re: How to use File Adapter to transport files
Best Regards

Receiver File adapter : No of write attempts

Similar Messages

Maybe you are looking for