Receiver JMS Adapter Content Conversion issue
Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.
Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..
Similar Messages
-
Receiver JMS adapter content conversion
Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
NavinHi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla -
Receiving file adapter content conversion issue
Guys,
Could someone please help me with a Receiving file adapter issue?
My output structure is something like this:
Vendor_file_MT (occurence 1)
--Recordset (occurence 0..unbounded)
Vendor (occurence 1)
Field1
Field2
Field3
Field73
Field74
My content conversion is very simple:
Recordset Structure: Vendor
Parameters:
Vendor.fieldFixedLengths 30,30,30, (...) ,1,27
Vendor.fixedLengthTooShortHandling Cut
Vendor.endSeparator 'nl'
If I don't do the content conversion, it works fine, I get all the fields in the XML format.
When I do the content conversion however, I get multiple lines but only the very first field of each line.
What could be the problem? What am I missing here? Any idea?
Your help would be much appreciated.
Thanks,
ViktorVarga:
Its little strange that its not working even after adding that. Did you check the receiver channel in your RWB for any logs. Add the statement in my previous post and Also try to clear the Cache and activate the channel again..See if it works
Glad it worked
Edited by: Guru on Apr 21, 2008 3:15 PM -
Complex XML to Plain in JMS adapter "Content conversion module"
Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein EmhjellenHello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan -
JMS Adapter Content Conversion
Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R ChandrasekharI had send the required PDF
Regards
Arpit seth -
JMS Adapter Content conversion using Webspear MQ
Hi All,
I have a scenario where I have to pick a flat file from WebSpear JMS Q.In turn I should convert flat structure into xml structure to parse to the RFC structure(YOTCS_I090_INV_S) and map to the traget structure.
Below is the Source structure:
Messages
->Message1
-->YOTCI_I090_INV_SYNC
--->YOTCS_I090_INV_SYNC
>item
>ZDATE
>TIME
>TZONE
>WERKS
>MATNR
>LGORT
>CHARG
>SOBKZ
>INSMK
>LIFNR
>ZMENGE
>ZMEINS
>LOT_NUMBER
>CODE_DATE
Source file look's as below:
YOTCS_I090_INV_S 4928
YOTCS_I090_INV_S 3
YOTCS_I090_INV_S 3
YOTCS_I090_INV_S 1
I am doing the file contact conversion as below in JMS Adapter:
Module Key ParameterName ParameterValue
Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
Plain2XML Transform.ContentType text/xml;charset=utf-8
Plain2XML xml.conversionType StructPlain2XML
Plain2XML xml.documentName YOTCI_I090_INV_SYNC
Plain2XML xml.documentNamespace urn:sap-com:document:sap:rfc:functions
Plain2XML xml.item.fieldFixedLengths 8,8,6,4,18,4,10,1,1,10,13,3,10,8
Plain2XML xml.item.fieldNames ZDATE,TIME,TZONE,WERKS,MATNR,LGORT,CHARG,SOBKZ,INSMK,LIFNR,ZMENGE,ZMEINS,LOT_NUMBER,CODE_DATE
Plain2XML xml.processFieldNames fromConfiguration
Plain2XML xml.recordsetStructure item,*
Can any one help me in configuring the Content conversion? Hope you got my issue.
Thanks in Advance.
Best Regards,
JoseJoseph,
Go thru the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Cheers
Agasthuri Doss -
Receiver File Adapter Content Conversion Problem.
Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
//write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
if (!("".equals(Input)) )
if (Input.length() > Size )
Return_Value = Input.substring(0,Size);
else
Return_Value = Input.substring(0, Input.length());
else
for(int i = 0; i< Size ; i++)
Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working. -
Receiver File Adapter - Content Conversion
Hi,
I don't quite get this:
I have a structure
<?xml version="1.0" encoding="UTF-8"?>
<AnElement1>
<AnElement2>
Bla bla bla
</AnElement2>
</AnElement1>
I want to convert this to a flat file with a line containing
Bla bla bla
In te receiver file adapter I define the following:
In the 'Content Conversion Parameters'
Recordset Structure : AnElement2
Name Value
AnElement2.addHeaderLine 0
AnElement2.fieldSeparator 'nl'
AnElement2.endSeparator 'nl'
This results in an Empty file each time indicating some error somewhere.
What am I missing?
Thanks
AndreHi Andre,
Just check the link <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm">File content conversion</a>
Also check out this web log <a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 to TXT</a>
Is there any error log shown in File adapter ?
Regards,
Keith
Message was edited by: keith thompson -
Receiver File adapter content conversion using StrictXml2PlainBean
Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name parameter value
recordTypes Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator |\n
FileTrailer.fieldSeparator |
Header.endSeparator |\n
Header.fieldSeparator |
TransactionDetail.endSeparator |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
Header 0...1
Transaction 0....Unbounded
TransactionHeader 1..1
TransactionDetail 0...unbounded
TransactionTrailer 1...1
FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AMHi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
<TransactionHeader> 1..1
</TransactionHeader>
<TransactionDetail> 0...Unbounded
</TransactionDetail>
<TransactionTrailer>1...1
</TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM -
Receiver Mail adapter Content type issue
Hello,
I am formatting the body of the receiver mail. The body of the email should look like below.
Dear PI User,
The following Interface has been successfully processed by the middleware PI system.
Please do not reply to this email. If you need more information please contact the Super User.
Regards,
SAP PI Team
The mapping looks fine and My source MT looks like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_Mail_Reply xmlns:ns1="http://test.com/Mail/Reply">
- <Reply> [0..unbounded]
- <Item> [0..unbounded]
<MESSAGE>Dear Business User, </MESSAGE> [0..1]
/Item>
- <Item>
<MESSAGE>The following Interface has been successfully processed by the middleware PI system.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Please do not reply to this email. If you need more information please contact the Super User.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Regards,</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>SAP PI Team </MESSAGE> [0..1]
</Item>
</Reply>
</ns1:MT_Mail_Reply>
The mapping works fine without errors and I get the target message as below after mapping-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ISAP PI Interface Status</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content>Dear Business User</Content>
<Content>The following Interface has been successfully processed by the middleware PI system.</Content>
<Content>Please do not reply to this email. If you need more information please contact the Super User</Content>
<Content>Regards,</Content>
<Content>SAP PI Team</Content>
</ns1:Mail>
t
The context of MESSAGE has been changed to Reply.
In the adapter I still get the following error.
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: com.sap.aii.af.sdk.xi.util.XMLScanException: expecting end tag: {http://sap.com/xi/XI/Mail/30}Mail, but found {}Content at state 1
Please advise !!
Thanks,
Teresa
**I changed the receiver mail adapter to not use Mail package and I receive an email without errors with the Content as mentioned above. **Hi Teresa,
I think the problem is that you are using multiple "Content" tags. Have you tried to use only one?, you can concatenate all your text.
Check the page 3 of this document to know how introduce new-line character http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992?overridelayout=t…
Regards. -
Blank line in receiver file adapter content conversion
Hi,
I am using a receiver file adapter. Everything is working fine. Except that a blank line is put by the file adapter between each records. It is a flat file format.
I have used the stting below. How do we remove the blank line?
Recordset : ACCTHDR,BATCHDR,TRANSREC,BATCHTLR,FILETLR
ACCTHDR.fieldFixedLengths 1,7,4,9,8,665
ACCTHDR.absoluteRowWidth 694
ACCTHDR.addHeaderLine 0
Thanks
Sachin KHi,
.endSeparator
The default value is a line break (no explicit separator after the last column; instead the structures are arranged line-by-line).
If you enter a character string here, the system adds it to the last column as a closing character. You can also make this specification in addition to NameA.fieldFixedLengths. To include a line break following the closing character, you must explicitly define it by attaching ´nl´ (including the quotation marks) to the string.
Regards
Agasthuri Doss -
Receiver Mail Adapter content conversion
Hi
I have read a lot of forums, etc and changed much on my adapter, but still get a xml file send as an attachment instead of a text file.
Can anyone please advise on how to change the receiver adapter to covert from xml to text.
I have added the module processing sequence like follow - please help.
Processing sequence
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean Mail
Module configuration
XML2Plain Details.endSeparator 'nl'
XML2Plain Details.fieldName ZINDUS,TCODE,TDATE,RDATE
XML2Plain Details.fieldSeparator |
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion xml/txt
XML2Plain Transform.ContentDisposition attachment;filename="TEBA.txt"
XML2Plain Transform.ContentType xml/plain
XML2Plain xTransform.recordsetStructure Details
Thanks
ClintonHi,
From the mail adapter FAQ,
<i>How can I set the file name of a mail attachment?
There are several MIME headers that play a role in how the client retrieves the file name of an attachment. Unfortunately, this behavior differs among various mail clients. The reason for this inconsistent behavior comes from the fact that this mechanism has been extended incrementally. The old way is to use the name parameter in the Content-Type header as specified in RFC1341. For example, you can set the content type of an XML attachment as:
Content-Type: application/xml; name="abc.xml"
RFC1521 discourages the use of this name parameter in anticipation of the new header Content-Disposition, which is defined in RFC1806.
With this Content-Disposition header, you can set the file name as:
Content-Disposition: attachment; filename="abc.xml"
Some clients may show the Content-Description value as the file name. The Content-Description header is typically used to associate some descriptive information to an attachment (RFC1341) as in
Content-Description: my xml file
To avoid potential interpretation problems, it is recommended to combine the use of these headers.</i>
Also, the note 779981 describes how to set Content Type in the mapping program. Am not sure, but combining the two, maybe it should be possible! Havent tried something of this sort though!
Regards
Bhavesh -
JMS Adapter - data conversion xml- structured data has extra characters
Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set. I am on PI 7.11, and the MQ Series (which JMS interacts with) is 6.0. The code I have is comparable to the wiki:[http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter], i.e. the example at the very bottom of that article.
The issue we are having is that an extra character gets inserted at the end of each structure (within the message), i.e. our message contains 4 structures, but when we view the structured data on our mainframe system (that arrives from PI), the entire message is shifted by 4 characters... by 1 after the end of each structure. On the mainframe, this extra character appears as '.'. It must be an end-of-line or something...
Has anyone had the same issue? If so, were you able to resolve? I could probably set up my message data type to just be one big declare (thus eliminating the use of structures within it), but that is something I'd rather not do.
We are in the process of reviewing Note 856346, #6 but not sure if it applies.
Regards,
KeithHi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla.. -
Sender/receiver JMS Adapter XML Format
What is the XML format do we need to pass to Sender/receiver JMS adapter to get it processed. Do we have any specific format like JDBC adapter.
Thanks,
SamHi,
1) The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK
2) Before to use the JMS adapter we must first install the relevant JMS driver.
The required Java libraries are product-specific The provider setting specifications are the same for the receiver and sender adapter
3)We need to configure the JMS adapter in the configuration part of the Integration Builder/PCK
4) The Sender JMS adapter is configured to send JMS messages to the Integration Engine or the PCK.
5)The Receiver JMS adapter is configured to be able to convert XI messages from the Integration Server or the PCK into JMS messages
Please go through this link
1)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
2)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm - Configuring the Sender JMS Adapter
3)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
Configuring the Receiver JMS Adapter
4)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS-Provider-Specific Settings
5)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS Adapter Modules
6)http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/frameset.htm -
Async/Sync and Sync/Async Bridge in the JMS Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Thanks,
Soumya. -
JMS like content conversion in Seeburger
Hi,
Can you have JMS like content conversion in Seeburger?
In Seeburger adapter if username/password is used, instead of public private keys, can you use JMS like content conversion in Seeburger. (the one which you specify as module parameters)
Regards,
Anirudh.Depending on what solutions you have: you may use seeburger bic module to convert from csv to xml or other formats. best thing usually is to follow the 2 step mapping strategy of seeburger where bic is doing a non-xml<->xml conversion and the target (XML-) format is mapped to in the SAP Message Mapping.
Maybe you are looking for
-
I got one of the free books of Itunes and I'm wondering how I read it. I double click and nothing happens. Is it only for Ipads and Iphones??
-
MapViewer ECWRenderer : supersampling not supported
In the Mapviewer user guide there is an example of how to build in a custom ECW renderer. There is an error in the example because parameter scaleImage is forgotten in function renderImages. It is unclear for me when this parameter is true or false.
-
Grey's Anatomy VOD episode not available in HD
Why is the 10/10/13 episode of Grey's Anatomy not available in HD? When I go to it the only option is to play it back in SD, which I don't want to do. There are 5 episodes available and the 10/10/13 episode is the only one not available in HD. I hope
-
UI Audio Issues following sleep with External Speakers
Hi I have a May 2011 27inch iMac that I upgraded to Lion. I use a set of Aego Acoustic Energy Speakers plugged in via the headphone port. All works fine until I put my mac to sleep, upon restoring from sleep some UI sounds stop working. iTunes, and Q
-
ITunes Does Not Open Automatically
I thought I had this remedied, but alas, the problem recurs. Even though I have the box checked to open iTunes when my iPhone is connected, this does not happen I must open iTunes manually each time. Can anyone help me to resolve this issue? Thank