Receiver Mail Adapter - Avoid attachment

Hello
Could anyone please let me know, how to prevent a mail attachment with a Receiver Mail Adapter. I have chosen XIPAYLOAD as Message Protocol. When the mail is received there is no mail body, instead only the attachment contains the message.
Thanks
John Jeyaraj

Hi,
Use Mail XSD as target structure in your mapping and enable use Mail package in your receiver channel...
for avoiding attachments..
HTH
Rajesh

Similar Messages

Receiver Mail Adapter with Attachment and Mailpackage

I have set up a scenario
filesystem: filexxx.xml filexxx.pdf
xml= mailpackage format to get the receiver mailaddress
pdf=the file i want to send as a attchment.
I am using the RenemAttachment module i found on SDN.
in SXMB_MONI it looks ok, the attachment name is filexxx.pdf application/pdf
But when i look at the mail send it shows as attachments
Untitled.txt and Untitled.pdf
Any id's
I only want to send the mail woth one attachment, the original pdf as a attchment.
tnx

Issue should be solved with SP17.
I solved by putting the attacgement into the content part of the message.
like.
<?xml version="1.0" encoding="ISO8859-1"?>
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
     <Subject>Greenery:TESTTEST</Subject>
     <From>customerservicedesk@xxxxxxx</From>
     <To>Peter.schults@xx</To>
     <Content_Type>application/pdf; name=TEST.pdf</Content_Type>
     <Content_Description>PDF FAKTUUR</Content_Description>
     <Content_Disposition>attachment; filename=TEST.pdf</Content_Disposition>
    </ns1:Mail>

Receiver Mail adapter - Text attachment

Hi Folks,
sorry to post again & again same issue.
if i want to achieve (proxy 2 mail scenario) Payload as text attachment in email,
do i need to use below 2 modules in My receiver CC?
Number 1 as AF_Modules/StrictXml2PlainBean
Number 2 as AF_Modules/MessageTransformBean
is it right (the order which i used and Modules which i used)?
Screen shot link of my config:
http://farm4.static.flickr.com/3071/2951413865_498cb4f19b_o.jpg
http://farm4.static.flickr.com/3027/2951427759_d4d3097826_o.jpg
did i make any mistake on my config?
Rightnow i am getting Business content data in the email message inbox only. I am not getting Business data as a attachment.
do i need to use PayloadSWAPBean module also to achieve my req.?
Inputs reg. this will be helpful.
Thanks
Praba

HI Gaurav,
I tested again for ur Try
With XIALL option - i am getting 2 files in a attachment
file name: ATT00001.xml - control records -
output file name : Untitled.xml - Payload (business data)
file name: ATT00001.xml as a attachment in the email
- XI PAYLOAD with out any module( but default sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean - module will be there), with out keep attachments option
output file name : Untitled.xml as a attachment in the email
XI Payload with out any module ( but default sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean - module will be there), with keep attachments
any one has idea on this, plz throw some inputs
Thanks
Praba

Receiver Mail Adapter - Mail body as attachment

Hello friends,
I have scenario = File -> XI -> Mail
The scenario is working but the problem is body of the email is coming as attachment in the mail client.(outlook express)
Is there any way to avoid the body coming as attachment.
Regards
Ramesh P

Hi Ramesh,
You can use the MessageTransformBean in the receiver mail adapter for this.
Refer this for the parameters which you can use
http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm
Regards,
Chandra

In Receiver Mail Adapter ,how to ignore SOAP Header attachment

HI Folks,
Am using Receiver Mail Adapter and am getting 2 attachments.
1. one is Soap header which contains Control records
2. payload
I want only Payload as attachment and need to ignore SOAP Header(AT00001.xml).
The configuration is as below:-Trasport protocol : SMTP
                                            Message Protocol: XIALL
Please provide Inputs.
Thanks & Regards
Ashok Reddy

Hi Gagandeep,
Scenario: File------>mail( Bypass scenario)
i had posted file in FTP and am getting attachment properly but aditionally am getting ATT00001.xml as SoapHeader.this i need to ignore.
PFB Module Parametrs i used:
localejbs/AF_Modules/MessageTransformBean   LocalEnterpriseBean    transform
Modulekey                      Parameterattribute                        value
transform                      Transform.ContentDisposition            attachment;filename=”Pocr_860.txt”
transform                     Tansform.ContentType                       text/plain
Regards
Ashok

Receiver Mail Adapter message with PDF attachment

Hi.
We are trying to generate emails from the mail adapter that includes the plain text in the body of the resulting email and an attached PDF file. We receive the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:newMailRequest_MT xmlns:ns0="http:/pdk/sap/TorstenTest">
   <Sender/>
   <Receiver/>
   <BodyContent/>
   <Subject/>
   <Attachment/>
</ns0:newMailRequest_MT>
I have set up an interface and mail adapter to be able to produce emails with plain text in the body. I used SAP note 748024 for this.
So right now I can make XI send emails with dynamic mail addresses. My problem lies in sending attached files with the mails as well.
I have read most of the threads in here, but none of them seem to answer just how to include the attachment. Which field in the 'Mail' message type is used for the attachment??
What needs to be added to the communication channel and adapter for it to include attachments, while the body of the mail still keeps the plain text message??

hi
I have used the following links to send the file as an attachement and as payload.
so it may help u.
links:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options , mail attatchment
Sender mail adapter - PayloadSwapBean - Step by step - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
points if helpful.
regards
sreeni

Receiver mail adapter - Payload as a Text attachment

Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
Prabaharan

Hi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM

Dynamic attachment name with receiver mail adapter and use mail package

We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?

Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind

Receiver Mail Adapter, Mail Package with Payload as Attachment

Hi Everyone,
I have spent the better part of the day today searching and testing all of the different combinations that I could think of to solve this problem, so please don't just do an SDN search for me and cut/paste in the links as there are too many contradictive answers piling up over the last year.
I am trying to use a Receiver mail adapter to send some data using the mail package, and I want to have the <content> tag be in an attachment. I am using mail package to dynamically set the mail address, but to also try and turn my data into a csv file that the recipient can open in Excel.
My mail package sets the following values:
<Content_Type>text/plain</Content_Type>
<Content_Disposition>attachment</Content_Disposition>
<Content>Sample Text</Content>
This blog is basically what I am trying to do:
<a href="/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword:///people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
But no where in here is he setting ContentDisposition, and he is (potentially) not using the MessageTransformBean module.
It is unclear if I need to use the MessageTransformBean to make this work?
Questions:
1) Do I need to use the MessageTransformBean?
2) Do I need to set the ContentDisposition in the mail package?
3) Does Service Pack matter with these settings? We are on SP15 upgrading to SP18 very soon.
Thanks
Peter

Hi Peter,
try:
<Content_Type>text/plain;name="file.csv"</Content_Type>
<Content_Disposition>attachment;filename="file.csv"</Content_Disposition>
<Content>Sample Text</Content>
Regards
Stefan

Dynamic file name of the attachment in receiver mail adapter

Hi
I have configured a receiver mail adapter which receives the payload as an xml attachment.
Right now the file name of the attachment is hardcoded to "invoice.xml".
I want to set it to dynamic ie. instead of "invoice.xml"... i want it as "invoice<invoicenumber>.xml".
Invoice number is present in the payload.
please suggest a solution w/o the need to develop a custom adapter module.
Thanks!
Regards,
Faria Mithani

Hi,
Go through this thread..
Dynamic File Name for Receiver File Adapter
Regards,
Sarvesh

Swapping attachment to content on Receiver Mail Adapter

Hi Experts,
Can I move my attachment data to content on receiver mail adapter ? I am not using Mail package or mapping. I tried using Payloadswapbean on receiver adapter but adapter generated email with attachment only with and without Payload swap bean module.
Please let me know if it is possible without using Mail Package.
Thanks,
Ankit

Hi there,
If you want to use attachment in content, then you need to collect the entire mail content in BPM. From there you can use Payloadswap bean on receiver adapter.
The reason behind using BPM is that the attachment is maintained only in Integration Directory. First the mapping converts the source into mail and then just before moving to receiver the attachment gets added to the mail(i.e. after mapping). So if a BPM is used then all the mail content with attachment will get transported to BPM first and then to the receiver with the above change (Payloadswap bean i.e transferring the attachment to content).
Best Regards,
Souvik

Excel file(.xls) as attachment and Body(Signature) via Receiver Mail Adapter

Hi PI Experts,
I have a requirement File(.txt) - PI(7.4) - mail (.xls attachment and signature in the body). Can anyone pls help me with the best approach to send excel file as mail attachment and signature in the body.
Thanks,
Sri

Hi
You can try this approach
1. use mail package and java mapping to populate the mail package.
inside the java mapping do the following
a. read the text file and convert it to excel and then set it as additional attachment.
b. map the signature and body with the field 'content' of mail package.
2. on the receiver mail adapter check both mail package and keep attachment options.
Hopefully this will work.
Reference links
excel write : Excel and Java - Read and Write Excel with Java - Tutorial
set attachment: How to save MainDocument as additonal attachment in sender channel?

Dynamic attachment name in receiver mail adapter for 1 attachment?

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Dynamic excel filename Receiver Mail adapter

Hi all,
May i know what is the way to dynamically set the file name of attachment in receiver mail adapter.
Can we do using DynamicConfiguraion???
If yes how?
Thanks In Advance,
H.L.Babu

But i am not using any mail package.
and also in adapter module i have written code like..
byte by[] = generateExcel(is);
                  xp.setName(filename);
                  System.err.println("The name of the file."+filename);
                  xp.setContentType("application/vnd.ms-excel");
            xp.setContent(by);
                  System.err.println("After successful setting of XML Payload");
            msg.setDocument(xp);
            System.err.println("Message Set is successful");
But it is not getting the excact file name..
Any coments..

Column header in receiver mail adapter

Hi experts,
I have a proxy to mail scenario in which I send a mail with a file attached.
Is it possible to put column headers in the attachment, possibly without changing the mapping?
I mean, working with module configuration in communication channel?
Thanks
Fabio Boni

hi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal

Receiver Mail Adapter - Avoid attachment

Similar Messages

Maybe you are looking for