Receiver Mail adapter Exactly Once
Hi,
I've setup my scenario RFC (trfc for exactly once QOS ) -> Mail (receiver)
Now I'm testing what happens when the smtp server is down.
In message monitor (sxmb_moni) , the message is successful. In comm chanel monitoring, I can see the message is in error.
The error states that "The message status was set to NDLV." but nothing is sent back to integration engine ...
The adapter retries to send the message 3 times but then just stops...
Q1 : How do you resend the message after the 3 retries ?
Q2 : How can you know this error arrived if the message is successful in sxmb_moni ?
Thanks
Hi Thierry,
If you see that the message passed in sxmb_moni, this indicates that the mapping was successful. Your problem is happening at the adapter engine level, which you access through Message Monitoring in the Runtime Workbench. It is there that you can try to resend the message.
Mike
Similar Messages
-
Receiver mail adapter - Payload as a Text attachment
Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
PrabaharanHi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM -
Regarding Receiver Mail adapter.
Hi experts,
iam looking at one off the weblog whick Michal Krawczyk have created.
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
in this weblog michal have told to download the XSD file from service market place and upload it in IR External definition it gives us target structure.What is the use off it, we can directly create the target structure.
And also one more dought what is the use off checking parameter in mail Attributes use mail package.I dont have much knowledge on mail adapter please help me in this issue.
i want to send parameters dynamically into receiver mail adapter in my project ie(TO,FROM,SUB and CONTENT) please send links and doc's on it.
Note: Helpfull answer will be rewarded.
Thanks & regards,
PhaniHi raj,
Once again thanks for the reply,I will explain my object,its is any 2 senarios in one object.
1) file to proxy were i upload employee details in to infotype2010 after inserting what ever error records i will l store them in error table.
2)ater geting error records if i get more then 25 i have to send file path and error records to receiver side. or if i get all sucess also i have 2 send sucess flag into receiver side.
but i haveto pick data from different systems and i have to send the data into different mail ids i have to generate TO FROM CONTENT dynamically.
onsite have prepared TS(Tecnical specs) in that spec they gave XIALL and SMTP.
so my question is using this parameters can i post them dynamically or not.
if YES ? then how??
please help me in this issue.
if u still dont understand give me ur id i will send my TS.
Thanks and regards,
phani -
Mail package in receiver mail adapter
Hi ,
I am trying to put XIPAYLOAD with <b>USE mail package</b> option.I have gone through the blogger posted my Michal on this...
when I download the Document mentioned in the blog for mailpackage to create the message do I need to use the <b>namespace</b> "http://sap.com/xi/XI/Mail/30" as it is or I need to replace the namespace in the document with my namespace...
some one could you please explain it little clearly...what is the use of this namespace..and how do I exactly proceed to make use of this document...
Thanks a lot.....hi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal -
Dynamic attachment name in receiver mail adapter for 1 attachment?
Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
DirkHi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk -
In Receiver Mail Adapter ,how to ignore SOAP Header attachment
HI Folks,
Am using Receiver Mail Adapter and am getting 2 attachments.
1. one is Soap header which contains Control records
2. payload
I want only Payload as attachment and need to ignore SOAP Header(AT00001.xml).
The configuration is as below:-Trasport protocol : SMTP
Message Protocol: XIALL
Please provide Inputs.
Thanks & Regards
Ashok ReddyHi Gagandeep,
Scenario: File------>mail( Bypass scenario)
i had posted file in FTP and am getting attachment properly but aditionally am getting ATT00001.xml as SoapHeader.this i need to ignore.
PFB Module Parametrs i used:
localejbs/AF_Modules/MessageTransformBean LocalEnterpriseBean transform
Modulekey Parameterattribute value
transform Transform.ContentDisposition attachment;filename=”Pocr_860.txt”
transform Tansform.ContentType text/plain
Regards
Ashok -
Receiver Mail Adapter message with PDF attachment
Hi.
We are trying to generate emails from the mail adapter that includes the plain text in the body of the resulting email and an attached PDF file. We receive the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:newMailRequest_MT xmlns:ns0="http:/pdk/sap/TorstenTest">
<Sender/>
<Receiver/>
<BodyContent/>
<Subject/>
<Attachment/>
</ns0:newMailRequest_MT>
I have set up an interface and mail adapter to be able to produce emails with plain text in the body. I used SAP note 748024 for this.
So right now I can make XI send emails with dynamic mail addresses. My problem lies in sending attached files with the mails as well.
I have read most of the threads in here, but none of them seem to answer just how to include the attachment. Which field in the 'Mail' message type is used for the attachment??
What needs to be added to the communication channel and adapter for it to include attachments, while the body of the mail still keeps the plain text message??hi
I have used the following links to send the file as an attachement and as payload.
so it may help u.
links:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options , mail attatchment
Sender mail adapter - PayloadSwapBean - Step by step - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
points if helpful.
regards
sreeni -
How to Configure Receiver Mail Adapter?
I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
MrudulaI am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" /> -
Dynamic excel filename Receiver Mail adapter
Hi all,
May i know what is the way to dynamically set the file name of attachment in receiver mail adapter.
Can we do using DynamicConfiguraion???
If yes how?
Thanks In Advance,
H.L.BabuBut i am not using any mail package.
and also in adapter module i have written code like..
byte by[] = generateExcel(is);
xp.setName(filename);
System.err.println("The name of the file."+filename);
xp.setContentType("application/vnd.ms-excel");
xp.setContent(by);
System.err.println("After successful setting of XML Payload");
msg.setDocument(xp);
System.err.println("Message Set is successful");
But it is not getting the excact file name..
Any coments.. -
Dynamic attachment name with receiver mail adapter and use mail package
We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind -
Receiver Mail Adapter, Mail Package with Payload as Attachment
Hi Everyone,
I have spent the better part of the day today searching and testing all of the different combinations that I could think of to solve this problem, so please don't just do an SDN search for me and cut/paste in the links as there are too many contradictive answers piling up over the last year.
I am trying to use a Receiver mail adapter to send some data using the mail package, and I want to have the <content> tag be in an attachment. I am using mail package to dynamically set the mail address, but to also try and turn my data into a csv file that the recipient can open in Excel.
My mail package sets the following values:
<Content_Type>text/plain</Content_Type>
<Content_Disposition>attachment</Content_Disposition>
<Content>Sample Text</Content>
This blog is basically what I am trying to do:
<a href="/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword:///people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
But no where in here is he setting ContentDisposition, and he is (potentially) not using the MessageTransformBean module.
It is unclear if I need to use the MessageTransformBean to make this work?
Questions:
1) Do I need to use the MessageTransformBean?
2) Do I need to set the ContentDisposition in the mail package?
3) Does Service Pack matter with these settings? We are on SP15 upgrading to SP18 very soon.
Thanks
PeterHi Peter,
try:
<Content_Type>text/plain;name="file.csv"</Content_Type>
<Content_Disposition>attachment;filename="file.csv"</Content_Disposition>
<Content>Sample Text</Content>
Regards
Stefan -
Receiver Mail Adapter with external Email-Provider
Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
ChristophHi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal -
Hi All,
I am using Receiver Mail Adapter to send mails.
When i choose Message Protocol the mail goes. But when i change it to XIPAYLOAD the mail doesnt go.
I cannot find any errors in SXI_MONITOR or in adapter monitoring.
My file is in this format..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail From XI new</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Content_Type>text/plain</Content_Type>
<Date>2006/08/24</Date>
<Content>Test mail from XI</Content>
</ns0:Mail>
Tried both ways..
XIPAYLOAD without Mail Package
XIPAYLOAD with Mail Package
Can anyone temme where im going wrong..or any settings which i need to do.Bhavesh
<i>Am not sure which SP onwards this is applicable. But , did you select and try with MAIL PACAKGE also selcted.</i>
Tried using both wayz..
You dont need to create ,http://sap.com/xi/XI/Mail/30 namespace in IR.
The mail is going now..
just disabled
Content_type, Date in Mapping.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail ALert XI</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Date>2006/08/24</Date>
<Content>SQL Server Is Not Working</Content>
</ns0:Mail>
Thanks
SUmit -
SAP PI: Using Variable Header Binding in Receiver Mail Adapter
Hello,
I try to use Variable Header Bindings in the Receiver Mail Adapter. Therefore I wrote the following User-Defined-Function in a mapping:
Java Function Start -
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName1");
DynamicConfigurationKey key2 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName2");
DynamicConfigurationKey key3 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName3");
conf.put(key1, new String("Test1"));
conf.put(key2, new String("Test2"));
conf.put(key3, new String("Test3"));
Java Function End -
As expected I see the Attributes and Parameters in the Dynamic Configuration in the SAP XI Monitor:
Dynamic Configuration Informattion Start -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Mapping der Request-Message
-->
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName3">Test3</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName2">Test2</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName1">Test1</SAP:Record>
</SAP:DynamicConfiguration>
Dynamic Configuration Informattion End -
Now I configure my Receiver eMail Communication Channel and set the Variable Header Fields as follows:
Adapter Specific Attributes: Checked
Variable Transport Binding: Checked
Variable Header (XHeaderName1): TSender
Variable Header (XHeaderName2): TReceiver
Variable Header (XHeaderName3): TOther
With this configuration I would have expected three new Header fields in the Header of the eMail, the reicever gets. But they are not there.
When I set standard attributes like THeaderTO, THeaderSubject a.s.o this works fine and the values are also set accordingly. Where it the mistake here?
The PI version we are working with is PI 7.0 SP10.
Your help will be highly appreciated.
Thank you,
SteffenHi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad -
Column header in receiver mail adapter
Hi experts,
I have a proxy to mail scenario in which I send a mail with a file attached.
Is it possible to put column headers in the attachment, possibly without changing the mapping?
I mean, working with module configuration in communication channel?
Thanks
Fabio Bonihi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal
Maybe you are looking for
-
How to set up iTunes on new Mac if already have iTunes account on old PC
I got a new iMac and started an iTunes account and hooked up my iPhone. Now it says that I can only use my iPhone on 1 computer and I would need to erase my current iPhone and sync it with the empty new ITunes account. How do I make my new computer
-
Hello , I want to create automatic PO. i followed the following steps: a) ticked automatic PO boxes in material purchasing view and vendor creation purchase view b) maintain source list c) maintain info record d) Create Purchase request e) then ME56
-
AMD HD Radeon 6310 - 1080p Video flickering only in browser
Hello All, I just got my Lenovo Thinkpad 120E with AMD HD Radeon 6310 card. I am able to play youtube videos of 1080p resolution and video files of full HD / Bluray resolutions if I play through VLC or one of those std video players. But playing 108
-
How to set a component as a parameter
Hi everybody! I need to make a component that could get an another component as a parameter or smth like that. So i could use like a content place holder in ASP.net. How can I do it?
-
I am unable to access or update my iPhoto library now that I have Yosemite. Can someone help me resolve this issue? I don't want to loose all of my pics & videos. Thanks!!!