Receiver Mail Adapter for PI 7.1 ehp1

Hi Experts,
Is there a way by using Mail Adapter (Receiver) to read the contents of the payload (which is considered also as the attachment) to be included in the body of the email?
Appreciate your help in advance. Thanks!
Cheers,
R-jay

Hi Shabarish,
Thanks for your answer.
I guess you misunderstood my query. What I would like to do is not to read the content of the email, but to read the content of payload and includes it on email. Using receiver mail adapter as standard (without using module or UDF), and configuring it as to sending the payload, you are just sending an email to the recipient with an attachment without any message in the body.
What I would like to know is how to send an email with details (on its body) taken from the information of the payload.
Cheers,
R-jay

Similar Messages

  • Dynamic attachment name in receiver mail adapter for 1 attachment?

    Hi,
    seems to be a tricky thing....
    The sender interface (file) picks up an xml file and a pdf document.
    The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
    We are following this thread:
    "Sending multiple attachments winthin a single Receiver Mail adapter in required format".
    So far we are able to generate the txt file and send it together with the pdf to the recipient.
    The txt file gets its name from the payload of the xml file.
    Unfortunately the pdf should be renamed to the same name as the txt file.
    And here we are stuck.
    We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
    But for the pdf we are only able to set a static name in the channel module page using
    Transform.ContentDisposition.
    Any ideas how to solve this are really welcome!!!!
    (Solutions that do not talk about using a new module to be written are prefered.)
    Regards
    Dirk

    Hi,
    seems to be a tricky thing....
    The sender interface (file) picks up an xml file and a pdf document.
    The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
    We are following this thread:
    "Sending multiple attachments winthin a single Receiver Mail adapter in required format".
    So far we are able to generate the txt file and send it together with the pdf to the recipient.
    The txt file gets its name from the payload of the xml file.
    Unfortunately the pdf should be renamed to the same name as the txt file.
    And here we are stuck.
    We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
    But for the pdf we are only able to set a static name in the channel module page using
    Transform.ContentDisposition.
    Any ideas how to solve this are really welcome!!!!
    (Solutions that do not talk about using a new module to be written are prefered.)
    Regards
    Dirk

  • How to change content-type in receiver mail adapter

    Hi,
    I have receiver mail adapter for sending XML file as attachment in the mail. My partner expects to receive mail with content-type: text/xml, but XI sends Content-Type: application/xml. Please advise how I can change content-type to text/xml.
    Thank you
    Lev

    hi,
    try MessageTransformBean
    Transform.ContentType
    http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm
    also shown in my blog:
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Error at Receiver Mail adapter modules

    Hi,
    We have implemented a receiver mail adapter for producing Excel file as attachment.
    It is giving the error as follows:
    Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of MessageTransformBean.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MessageTransformBean..
    This configuration has worked well earlier, and suddenly it is throwing this error.
    Please let me know what might be the reson for this.
    Thank you.
    Regards
    Bhanu.
    Edited by: Bhanu Tiruveedula on Sep 15, 2009 1:00 AM
    Edited by: Bhanu Tiruveedula on Sep 15, 2009 1:00 AM

    Hi,
    I didn't use the fullstop.
    Can anybody help me in resolving this issue?
    Thanks.

  • Receiver Mail Adapter - Mail body as attachment

    Hello friends,
    I have scenario = File -> XI  -> Mail
    The scenario is working but the problem is body of the email is coming as attachment in the mail client.(outlook express)
    Is there any way to avoid the body coming as attachment.
    Regards
    Ramesh P

    Hi Ramesh,
    You can use the MessageTransformBean in the receiver mail adapter for this.
    Refer this for the parameters which you can use
    http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm
    Regards,
    Chandra

  • Receiver mail adapter configuration for e-mail attachments

    Hi ,
    I need to send two files from sender file adapter to receiver mail adapter as e mail attachment.
    I want same attachment name in email as on sender side on FTP location.
    This is by pass scenario no object created in ESR.Please suggest how to handle this.
    For example if file name test.txt is send by file adapter then on mail  attachment name should be test.txt
    Thanks
    Mohit
    Edited by: Mohit Verma on Feb 10, 2012 4:18 PM

    Hi Mohit,
    Follow this blog for the ID configuration:
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4383
    Create Receiver Determination and Interface Determination as described, and add a sender file CC and receiver mail CC according to your needs, plus sender and receiver agreements.
    In order to maintain the original file names, use a simple adapter module with the code mentioned here:
    http://forums.sdn.sap.com/thread.jspa?threadID=2122711&start=14
    Hope this helps,
    Greg

  • How to use XML Anonymizer Module for receiver mail Adapter?

    Hi All,
             I would like to know how to use XML Anonymizer Module for receiver mail adapter so as to change the namespace to http://sap.com/xi/XI/Mail/30 from my original namespace? Thank you all in advance?

    Hi,
    This may help u:
    Replacing one namespace with another using XML Anonymizer Module
    Thanks
    Amit

  • Receiver Mail Adapter message with PDF attachment

    Hi.
    We are trying to generate emails from the mail adapter that includes the plain text in the body of the resulting email and an attached PDF file. We receive the following structure:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:newMailRequest_MT xmlns:ns0="http:/pdk/sap/TorstenTest">
       <Sender/>
       <Receiver/>
       <BodyContent/>
       <Subject/>
       <Attachment/>
    </ns0:newMailRequest_MT>
    I have set up an interface and mail adapter to be able to produce emails with plain text in the body. I used SAP note 748024 for this.
    So right now I can make XI send emails with dynamic mail addresses. My problem lies in sending attached files with the mails as well.
    I have read most of the threads in here, but none of them seem to answer just how to include the attachment. Which field in the 'Mail' message type is used for the attachment??
    What needs to be added to the communication channel and adapter for it to include attachments, while the body of the mail still keeps the plain text message??

    hi
    I have used the following links to send the file as an attachement and as payload.
    so it may help u.
    links:
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options , mail attatchment
    Sender mail adapter - PayloadSwapBean - Step by step - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    points if helpful.
    regards
    sreeni

  • Receiver mail adapter - Payload as a Text attachment

    Hi,
    In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
    when i send payload, currently i am receiving as a XML file.
    I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter  in XI forum(topic)
    I have having following config
    Processing Sequence
    localejbs/CreateAttachment Local Enterprise Bean XML2Plain
    localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
    Module Configuration
    XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
    XML2Plain Transform.ContentType text/plain;charset=utf-8
    XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
    XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
    XML2Plain xml.addHeaderLine 0
    XML2Plain xml.conversionType StructXML2Plain
    XML2Plain xml.recordsetStructure Header1000,Header2000
    Please suggest some solution."
    Could you tell me exactly where i need to do all these setting and
    do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
    give in detail ? (in Receiver mail adapter Communication channel,  advanced mode additional parameters)
    I tried to follow this also
    http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
    but i could not find much info on this help.sap.com reg. req.
    Thanks
    Prabaharan

    Hi
    f i create like this Receiver CC (module Tab)
    number: 1
    Module Name: localejbs/CreateAttachment
    Module Type: Local Enterprise Bean
    Module Key: mail
    is it enough? do i need any other setting like this
    Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
    mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
    Settings are fine for the Module
    Processing Sequence
    localejbs/CreateAttachment Local Enterprise Bean XML2Plain
    localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
    Module Configuration
    XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
    In this:
    Module Key: XML2Plain
    Parameter Name: Transform.Class
    Parameter Value: com.sap.aii.messaging.adapter.Conversion
    is it right?
    Processing sequence is fine
    XML2Plain Transform.ContentType text/plain;charset=utf-8
    XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
    XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
    XML2Plain xml.addHeaderLine 0
    XML2Plain xml.conversionType StructXML2Plain
    XML2Plain xml.recordsetStructure Header1000,Header2000
    can i anyone explain how to these settings?
    Is this key valid to provide inputs to the module check with the code for this module
    This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
    Thanks
    Gaurav
    Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM

  • Dynamic attachment name with receiver mail adapter and use mail package

    We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
    I could probably do this using the adapter module (as per the following link),
    http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
    I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?

    Hi,
    1) XML payload as attachment (with dynamic name)
    2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
    These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
    The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
    <?xml version="1.0"; encoding="UTF-8"?>
    <p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
    <Subject>My Invoice</Subject>
    <From>from email address<;/From>
    <To>to email address</To>
    <Content_Type>text/plain;name="MyFile.csv";</Content_Type>  --> file name here
    <Content>123;A49;aaa</Content>   -> attachment xml here
    </p2:Mail>
    And you have to select MailPackage in the receiver mail adapter.
    Regards,
    Aravind

  • Receiver Mail Adapter, Mail Package with Payload as Attachment

    Hi Everyone,
    I have spent the better part of the day today searching and testing all of the different combinations that I could think of to solve this problem, so please don't just do an SDN search for me and cut/paste in the links as there are too many contradictive answers piling up over the last year.
    I am trying to use a Receiver mail adapter to send some data using the mail package, and I want to have the <content> tag be in an attachment.  I am using mail package to dynamically set the mail address, but to also try and turn my data into a csv file that the recipient can open in Excel.
    My mail package sets the following values:
    <Content_Type>text/plain</Content_Type>
    <Content_Disposition>attachment</Content_Disposition>
    <Content>Sample Text</Content>
    This blog is basically what I am trying to do: 
    <a href="/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword:///people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
    But no where in here is he setting ContentDisposition, and he is (potentially) not using the MessageTransformBean module.
    It is unclear if I need to use the MessageTransformBean to make this work? 
    Questions:
    1) Do I need to use the MessageTransformBean?
    2) Do I need to set the ContentDisposition in the mail package?
    3) Does Service Pack matter with these settings?  We are on SP15 upgrading to SP18 very soon.
    Thanks
    Peter

    Hi Peter,
    try:
    <Content_Type>text/plain;name="file.csv"</Content_Type>
    <Content_Disposition>attachment;filename="file.csv"</Content_Disposition>
    <Content>Sample Text</Content>
    Regards
    Stefan

  • Column header in receiver mail adapter

    Hi experts,
    I have a proxy to mail scenario in which I send a mail with a file attached.
    Is it possible to put column headers in the attachment, possibly without changing the mapping?
    I mean, working with module configuration in communication channel?
    Thanks
    Fabio Boni

    hi
    There are several scenario's
    have a look at following :
    /people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    /people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
    /people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
    /people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
    and for further
    you can follow
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
    i hope this will help you.
    Pls : Reward points if helpful
    Vishal

  • How to set "Cc" field in Dynamic Email address in Receiver Mail adapter

    I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
    Michal's blog “Mail Adapter (XI) - how to implement dynamic mail address.” was a gr8 help in doing this.
    But there is no clue of setting up of "CC" in email.
    There should be "CC" in email is our bussiness requirement.
    Would appreciate your helps.
    with regards,
    Ravi Siddam

    Hi,
    If you do not need mail package for other reasons, I suppose it is enough to provide a value in Dynamic Configuration for fields "THeaderTO" and "THeaderCC" and the select "Use Adapter-Specific Message Attributes" and "Variable Transport Binding" in receiver Mail Adapter.
    see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm">SAP help</a> for more details.
    Regards,
    Daniele

  • Change "subject" in Receiver Mail Adapter Module

    Hi all,
    following the "How To Guide" I developed a Module for my receiver mail adapter. Everything works fine.
    Now my question: is it possible to change the content of the mail-"subject" in the module?
    Your help is appreciated.
    Carmen

    Hi Stefan,
    maybe I should describe my problem more detailed:
    My scenario is RFC-XI-Mail. I use the mail package to determine the receiver of the mail dynamically. Another thing I want to do, is to attach a file to this mail which is located on the server. So far so good.
    My problem is, that the name of the file (which I need in my adapter module) changes for every mail. So what I need is the possibility to deliver it to the adapter module.
    I found out that it is possible to read the payload. So my idea was to hand it over in one of the fields like "subject". But now I want to change the subject afterwards...(delete the filename).
    Maybe you have another idea?
    Regards
    Carmen

  • Dynamic file name of the attachment in receiver mail adapter

    Hi
    I have configured a receiver mail adapter which receives the payload as an xml attachment.
    Right now the file name of the attachment is hardcoded to "invoice.xml".
    I want to set it to dynamic ie. instead of "invoice.xml"... i want it as "invoice<invoicenumber>.xml".
    Invoice number is present in the payload.
    please suggest a solution w/o the need to develop a custom adapter module.
    Thanks!
    Regards,
    Faria Mithani

    Hi,
    Go through this thread..
    Dynamic  File Name for Receiver File Adapter
    Regards,
    Sarvesh

Maybe you are looking for