Receiver Mail adapter - Invalid mail adapter

We have been getting the following error with our Mail adapters. We are on PI 7.31.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid XIMailAdapter channel
This error happened almost 3 weeks back. I just went and re-activated the comm. channel and it started working...
Today again , we had this same issue and I went in re-activated the comm. channel and it worked. So I am confused as to why it went into Invalid mail adapter status. Any ideas? The last email was sent almost 2 weeks back.. Could this be due to inactivity?

Hi ,
This can be due to many reasons .Most probable reason can be SP upgrade or some other basis activity performed related to SMTP server or so.
Could this be due to inactivity?
No
Just a link below on mail adapter
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&…
Thanks.

Similar Messages

Receiver Mail Adapter configuration Error???

Hi,
i've created a Mail Adapter with the following configuration:
Adaptertype: Mail
Receiver
Transport-Protocol: SMTP
Message-Protocol: XIPAYLOAD
Adapter-Engine: Integration-Engine
I set From and To Fields to a valid address. When i start a test the message is passing the integration engine and an error occurs within the mail-adapter:
Mail: Configuration error: Channel 7a15b118b96b392bbc9be5922f55b7d0is not configured for XIMailAdapter
Mail: call failed; com.sap.aii.af.ra.ms.api.RecoverableException: Error: invalid XIMailAdapter channel 7a15b118b96b392bbc9be5922f55b7d0
How can this happen?
regards
ms

Hi,
Reffer these BLOGS
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Target Structure:::::
- <xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
- 
- <xs:element name="Mail">
- <xs:annotation>
<xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:string" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Reply_To" type="xs:string" minOccurs="0" />
<xs:element name="Content_Type" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
<xs:element name="Message_ID" type="xs:string" minOccurs="0" />
<xs:element name="X_Mailer" type="xs:string" minOccurs="0" />
- <xs:element name="Content" minOccurs="0">
- <xs:annotation>
<xs:documentation>any type</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
<xs:attribute name="encoding" type="xs:string" />
</xs:complexType>
</xs:element>
- <xs:element name="MailReceipt">
- <xs:annotation>
<xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Server" type="xs:string" />
<xs:element name="Format" type="xs:string" />
<xs:element name="UseMailPackage" type="xs:boolean" />
<xs:element name="Encoding" type="xs:string" />
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:dateTime" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Regards
Seshagiri

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

Retrieval of attachment filename - receiver mail adapter

Hi,
I am using the mail adapter to receive an e-mail into PI. This e-mail has an attached CSV file.
First, I am using the PayloadSwapBean to swap the application playload to the attachment payload
Second, I am using the MessageTransformBean to transform the CSV file into an XML document
These are both working fine and the message is then passing into the relevant message mapping.
However, I would like to be able to use the attachment filename in the message mapping.
Can anyone advise how to do this for the mail adapter ?
I've done it loads of times for the file adapter but never the mail adapter (when using attachments) so I am a bit stumped.
Any advice greatly received.
Cheers
Colin.

Hi Progirl,
I want to dynamically set the name of attachment in receiver mail Communication Channel.
Example: IN__9907211000004_4048454000005_20081211_01000000002643
The first two numbers 9907211000004 & 4048454000005 I want to read it from the message
20081211 this is the date and
And againg this number 01000000002643 is read from message.
I read from your response. You had created adapter module for the similar purpose. Can you share it. Since I am new to writing Adapter Module.
Thank You in Advance.
Mukhtar

Dynamic attachment name in receiver mail adapter for 1 attachment?

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1 swap.keyName payload-name
1 swap.keyValue MailAttachment-1
RECEIVER FILE MODULES
1 localejbs/AF_Modules/DynamicConfigurationBean Local Enterprise Bean 1
2 localejbs/CallSapAdapter Local Enterprise Bean 2
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
 private static final long serialVersionUID = 7612238514043673502L;
 private SessionContext myContext;
 private MessagePropertyKey myFileName;
 public void ejbRemove() {
 public void ejbActivate() {
 public void ejbPassivate() {
 public void setSessionContext(SessionContext context) {
 myContext = context;
@throws CreateException
 public void ejbCreate() throws CreateException {
 public void getMessageProperty(MessagePropertyKey FileName) {
 myFileName = FileName;
@param moduleContext
 Contains data of the module processor that might be important
 for the module implementation such as current channel ID
@param inputModuleData
 Contains the input XI message as principal data plus eventual
 set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
 response message if the module is the last in the chain.
@exception ModuleException
 Describes the cause of the exception and indicates whether
 an retry is sensible or not.
 @SuppressWarnings("deprecation")
 public ModuleData process(ModuleContext moduleContext,
 ModuleData inputModuleData) throws ModuleException {
 try {
 Message msg = (Message) inputModuleData.getPrincipalData();
 TextPayload payload = msg.getDocument();
 String contentType = payload.getContentType();
 // Content Type could be something like
 // text/plain;charset="UTF-8";name="file.txt"
 contentType = contentType.replaceAll("\"", "");
 int i = contentType.lastIndexOf("=") + 1;
 String fileName = contentType.substring(i);
 msg.setMessageProperty(myFileName, fileName);
 inputModuleData.setPrincipalData(msg);
 } catch (Exception e) {
 return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14 Information Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14 Information Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14 Information Swap: successfully swapped
2009-02-04 11:41:14 Information Mail: message leaving the adapter (call)
2009-02-04 11:41:14 Information The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14 Information Backward validation is enabled
2009-02-04 11:41:14 Error Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

In Receiver Mail Adapter ,how to ignore SOAP Header attachment

HI Folks,
Am using Receiver Mail Adapter and am getting 2 attachments.
1. one is Soap header which contains Control records
2. payload
I want only Payload as attachment and need to ignore SOAP Header(AT00001.xml).
The configuration is as below:-Trasport protocol : SMTP
                                            Message Protocol: XIALL
Please provide Inputs.
Thanks & Regards
Ashok Reddy

Hi Gagandeep,
Scenario: File------>mail( Bypass scenario)
i had posted file in FTP and am getting attachment properly but aditionally am getting ATT00001.xml as SoapHeader.this i need to ignore.
PFB Module Parametrs i used:
localejbs/AF_Modules/MessageTransformBean   LocalEnterpriseBean    transform
Modulekey                      Parameterattribute                        value
transform                      Transform.ContentDisposition            attachment;filename=”Pocr_860.txt”
transform                     Tansform.ContentType                       text/plain
Regards
Ashok

Receiver Mail Adapter message with PDF attachment

Hi.
We are trying to generate emails from the mail adapter that includes the plain text in the body of the resulting email and an attached PDF file. We receive the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:newMailRequest_MT xmlns:ns0="http:/pdk/sap/TorstenTest">
 <Sender/>
 <Receiver/>
 <BodyContent/>
 <Subject/>
 <Attachment/>
</ns0:newMailRequest_MT>
I have set up an interface and mail adapter to be able to produce emails with plain text in the body. I used SAP note 748024 for this.
So right now I can make XI send emails with dynamic mail addresses. My problem lies in sending attached files with the mails as well.
I have read most of the threads in here, but none of them seem to answer just how to include the attachment. Which field in the 'Mail' message type is used for the attachment??
What needs to be added to the communication channel and adapter for it to include attachments, while the body of the mail still keeps the plain text message??

hi
I have used the following links to send the file as an attachement and as payload.
so it may help u.
links:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options , mail attatchment
Sender mail adapter - PayloadSwapBean - Step by step - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
points if helpful.
regards
sreeni

Dynamic attachment name in receiver mail adapter

Hi all,
i am doing a receiver mail scenario (PI 7.1). my requirement is like this :
Receiver file need to be send in receiver mail attachment and attachment name should be dynamic
format for the attachment name should be like this
R+value from a particular field in payload +Timestamp
for example my file name should be like this R001_510815021009062532.xml
which is R+ 001_510815 + 021009062532 + .xml
can anybody suggest me how to go for this requirement? is ther any UDF or should i go for adapter module developement?
Thanks
sandeep sharma
Edited by: sandeep sharma on Oct 13, 2009 8:55 AM

Hi K Fatima,
I read your solution.I have a similar requiement but I need to send the entire output payload as an attachment,so I am using XSLT to send the payload as an attachment.
I am creating the file name through dynamic configuration in XSLT but the name of attachment is not as required but its any random generated name:
*code used:*
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output method="xml" version="1.0" encoding="UTF-8" />
<xsl:output indent="yes" />
<xsl:param name="inputparam"/>

<xsl:template match="*">
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<xsl:variable name="new-value" select="Shipment/InternalShipmentNum"/>
<Subject>Mail</Subject>
<From>xyz</From>
<To>abc</To>
<xsl:variable name="dynamic-conf"
 select="map:get($inputparam, 'DynamicConfiguration')" />
 <xsl:variable name="dynamic-key"
 select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
 <xsl:variable name="dynamic-value"
 select="dyn:get($dynamic-conf, $dynamic-key)" />
 <xsl:variable name="new-value"
 select="concat($dynamic-value, 'subfolder\')" />
 <xsl:variable name="dummy"
 select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />

<Content_Type>application/xml</Content_Type>
<!Content Description>
<Content_Disposition>attachment;filename "<xsl:copy-of select="$new-value"/>"</Content_Disposition>

<Content_Description><xsl:copy-of select="$new-value"/></Content_Description>
<Content>
<xsl:copy-of select=".">
<xsl:apply-templates/>
</xsl:copy-of>
</Content>
</ns:Mail>
</xsl:template>
</xsl:stylesheet>
Please suggest ! I need the value in "Shipment/InternalShipmentNum" as name of attachment.
Thanks in advance!
Indu Khurana

How to Configure Receiver Mail Adapter?

I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
Mrudula

I am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

Receiver mail adapter - Payload as a Text attachment

Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
Prabaharan

Hi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM

Dynamic excel filename Receiver Mail adapter

Hi all,
May i know what is the way to dynamically set the file name of attachment in receiver mail adapter.
Can we do using DynamicConfiguraion???
If yes how?
Thanks In Advance,
H.L.Babu

But i am not using any mail package.
and also in adapter module i have written code like..
byte by[] = generateExcel(is);
                  xp.setName(filename);
                  System.err.println("The name of the file."+filename);
                  xp.setContentType("application/vnd.ms-excel");
            xp.setContent(by);
                  System.err.println("After successful setting of XML Payload");
            msg.setDocument(xp);
            System.err.println("Message Set is successful");
But it is not getting the excact file name..
Any coments..

Dynamic attachment name with receiver mail adapter and use mail package

We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?

Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind

Receiver Mail Adapter, Mail Package with Payload as Attachment

Hi Everyone,
I have spent the better part of the day today searching and testing all of the different combinations that I could think of to solve this problem, so please don't just do an SDN search for me and cut/paste in the links as there are too many contradictive answers piling up over the last year.
I am trying to use a Receiver mail adapter to send some data using the mail package, and I want to have the <content> tag be in an attachment. I am using mail package to dynamically set the mail address, but to also try and turn my data into a csv file that the recipient can open in Excel.
My mail package sets the following values:
<Content_Type>text/plain</Content_Type>
<Content_Disposition>attachment</Content_Disposition>
<Content>Sample Text</Content>
This blog is basically what I am trying to do:
<a href="/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword:///people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
But no where in here is he setting ContentDisposition, and he is (potentially) not using the MessageTransformBean module.
It is unclear if I need to use the MessageTransformBean to make this work?
Questions:
1) Do I need to use the MessageTransformBean?
2) Do I need to set the ContentDisposition in the mail package?
3) Does Service Pack matter with these settings? We are on SP15 upgrading to SP18 very soon.
Thanks
Peter

Hi Peter,
try:
<Content_Type>text/plain;name="file.csv"</Content_Type>
<Content_Disposition>attachment;filename="file.csv"</Content_Disposition>
<Content>Sample Text</Content>
Regards
Stefan

Receiver Mail Adapter with external Email-Provider

Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
Christoph

Hi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal

Receiver Mail Adapter

Hi All,
I am using Receiver Mail Adapter to send mails.
When i choose Message Protocol the mail goes. But when i change it to XIPAYLOAD the mail doesnt go.
I cannot find any errors in SXI_MONITOR or in adapter monitoring.
My file is in this format..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail From XI new</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Content_Type>text/plain</Content_Type>
<Date>2006/08/24</Date>
<Content>Test mail from XI</Content>
</ns0:Mail>
Tried both ways..
XIPAYLOAD without Mail Package
XIPAYLOAD with Mail Package
Can anyone temme where im going wrong..or any settings which i need to do.

Bhavesh
Am not sure which SP onwards this is applicable. But , did you select and try with MAIL PACAKGE also selcted.
Tried using both wayz..
You dont need to create ,http://sap.com/xi/XI/Mail/30 namespace in IR.
The mail is going now..
just disabled
Content_type, Date in Mapping.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail ALert XI</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Date>2006/08/24</Date>
<Content>SQL Server Is Not Working</Content>
</ns0:Mail>
Thanks
SUmit

Receiver Mail adapter - Invalid mail adapter

Similar Messages

Maybe you are looking for