Receiver Mail adapter to be unbounded
Hi experts, I need to send by receiver mail adapter an unbounded amount of mails. Also, I need to use the Mail Package to implement dynamic mail address.
I'm actually using the xsd posted in note 748024, but it sends only one mail per call.
Thanks in Advance,
Roberto Solotun
Hello Roberto,
I was facing the same problem.In our case,XI was picking a CSV file from R/3.This file had multiple records with email id as a field.This CSV file had to be split and records need to be segregated based on email IDs .These records then had to be sent as CSV attachment to respective email IDs.
Mail.xsd doesn't support multiple emails.I could achieve this with two mappings and a BPM:
1) 1:N Message Type of CSV to Message Type of CSV with occurrence 1..unbounded
Here ,I segregate records based on email IDs.
2) 1:1 Message Type of CSV to Mail.xsd
3) A BPM which has a ForEach Block where each split CSV is passed and a mail is sent.
Mapping 1 is used after receive and mapping 2 is used in ForEach Block
Kindly let us know if this helps you.
Thanks.
Regards,
Shweta
Similar Messages
-
Receiver Mail adapter Content type issue
Hello,
I am formatting the body of the receiver mail. The body of the email should look like below.
Dear PI User,
The following Interface has been successfully processed by the middleware PI system.
Please do not reply to this email. If you need more information please contact the Super User.
Regards,
SAP PI Team
The mapping looks fine and My source MT looks like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_Mail_Reply xmlns:ns1="http://test.com/Mail/Reply">
- <Reply> [0..unbounded]
- <Item> [0..unbounded]
<MESSAGE>Dear Business User, </MESSAGE> [0..1]
/Item>
- <Item>
<MESSAGE>The following Interface has been successfully processed by the middleware PI system.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Please do not reply to this email. If you need more information please contact the Super User.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Regards,</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>SAP PI Team </MESSAGE> [0..1]
</Item>
</Reply>
</ns1:MT_Mail_Reply>
The mapping works fine without errors and I get the target message as below after mapping-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ISAP PI Interface Status</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content>Dear Business User</Content>
<Content>The following Interface has been successfully processed by the middleware PI system.</Content>
<Content>Please do not reply to this email. If you need more information please contact the Super User</Content>
<Content>Regards,</Content>
<Content>SAP PI Team</Content>
</ns1:Mail>
t
The context of MESSAGE has been changed to Reply.
In the adapter I still get the following error.
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: com.sap.aii.af.sdk.xi.util.XMLScanException: expecting end tag: {http://sap.com/xi/XI/Mail/30}Mail, but found {}Content at state 1
Please advise !!
Thanks,
Teresa
**I changed the receiver mail adapter to not use Mail package and I receive an email without errors with the Content as mentioned above. **Hi Teresa,
I think the problem is that you are using multiple "Content" tags. Have you tried to use only one?, you can concatenate all your text.
Check the page 3 of this document to know how introduce new-line character http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992?overridelayout=t…
Regards. -
Dynamic attachment name in receiver mail adapter for 1 attachment?
Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
DirkHi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk -
In Receiver Mail Adapter ,how to ignore SOAP Header attachment
HI Folks,
Am using Receiver Mail Adapter and am getting 2 attachments.
1. one is Soap header which contains Control records
2. payload
I want only Payload as attachment and need to ignore SOAP Header(AT00001.xml).
The configuration is as below:-Trasport protocol : SMTP
Message Protocol: XIALL
Please provide Inputs.
Thanks & Regards
Ashok ReddyHi Gagandeep,
Scenario: File------>mail( Bypass scenario)
i had posted file in FTP and am getting attachment properly but aditionally am getting ATT00001.xml as SoapHeader.this i need to ignore.
PFB Module Parametrs i used:
localejbs/AF_Modules/MessageTransformBean LocalEnterpriseBean transform
Modulekey Parameterattribute value
transform Transform.ContentDisposition attachment;filename=”Pocr_860.txt”
transform Tansform.ContentType text/plain
Regards
Ashok -
Receiver Mail Adapter message with PDF attachment
Hi.
We are trying to generate emails from the mail adapter that includes the plain text in the body of the resulting email and an attached PDF file. We receive the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:newMailRequest_MT xmlns:ns0="http:/pdk/sap/TorstenTest">
<Sender/>
<Receiver/>
<BodyContent/>
<Subject/>
<Attachment/>
</ns0:newMailRequest_MT>
I have set up an interface and mail adapter to be able to produce emails with plain text in the body. I used SAP note 748024 for this.
So right now I can make XI send emails with dynamic mail addresses. My problem lies in sending attached files with the mails as well.
I have read most of the threads in here, but none of them seem to answer just how to include the attachment. Which field in the 'Mail' message type is used for the attachment??
What needs to be added to the communication channel and adapter for it to include attachments, while the body of the mail still keeps the plain text message??hi
I have used the following links to send the file as an attachement and as payload.
so it may help u.
links:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options , mail attatchment
Sender mail adapter - PayloadSwapBean - Step by step - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
points if helpful.
regards
sreeni -
How to Configure Receiver Mail Adapter?
I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
MrudulaI am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" /> -
Receiver mail adapter - Payload as a Text attachment
Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
PrabaharanHi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM -
Dynamic excel filename Receiver Mail adapter
Hi all,
May i know what is the way to dynamically set the file name of attachment in receiver mail adapter.
Can we do using DynamicConfiguraion???
If yes how?
Thanks In Advance,
H.L.BabuBut i am not using any mail package.
and also in adapter module i have written code like..
byte by[] = generateExcel(is);
xp.setName(filename);
System.err.println("The name of the file."+filename);
xp.setContentType("application/vnd.ms-excel");
xp.setContent(by);
System.err.println("After successful setting of XML Payload");
msg.setDocument(xp);
System.err.println("Message Set is successful");
But it is not getting the excact file name..
Any coments.. -
Dynamic attachment name with receiver mail adapter and use mail package
We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind -
Receiver Mail Adapter, Mail Package with Payload as Attachment
Hi Everyone,
I have spent the better part of the day today searching and testing all of the different combinations that I could think of to solve this problem, so please don't just do an SDN search for me and cut/paste in the links as there are too many contradictive answers piling up over the last year.
I am trying to use a Receiver mail adapter to send some data using the mail package, and I want to have the <content> tag be in an attachment. I am using mail package to dynamically set the mail address, but to also try and turn my data into a csv file that the recipient can open in Excel.
My mail package sets the following values:
<Content_Type>text/plain</Content_Type>
<Content_Disposition>attachment</Content_Disposition>
<Content>Sample Text</Content>
This blog is basically what I am trying to do:
<a href="/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword:///people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
But no where in here is he setting ContentDisposition, and he is (potentially) not using the MessageTransformBean module.
It is unclear if I need to use the MessageTransformBean to make this work?
Questions:
1) Do I need to use the MessageTransformBean?
2) Do I need to set the ContentDisposition in the mail package?
3) Does Service Pack matter with these settings? We are on SP15 upgrading to SP18 very soon.
Thanks
PeterHi Peter,
try:
<Content_Type>text/plain;name="file.csv"</Content_Type>
<Content_Disposition>attachment;filename="file.csv"</Content_Disposition>
<Content>Sample Text</Content>
Regards
Stefan -
Receiver Mail Adapter with external Email-Provider
Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
ChristophHi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal -
Hi All,
I am using Receiver Mail Adapter to send mails.
When i choose Message Protocol the mail goes. But when i change it to XIPAYLOAD the mail doesnt go.
I cannot find any errors in SXI_MONITOR or in adapter monitoring.
My file is in this format..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail From XI new</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Content_Type>text/plain</Content_Type>
<Date>2006/08/24</Date>
<Content>Test mail from XI</Content>
</ns0:Mail>
Tried both ways..
XIPAYLOAD without Mail Package
XIPAYLOAD with Mail Package
Can anyone temme where im going wrong..or any settings which i need to do.Bhavesh
<i>Am not sure which SP onwards this is applicable. But , did you select and try with MAIL PACAKGE also selcted.</i>
Tried using both wayz..
You dont need to create ,http://sap.com/xi/XI/Mail/30 namespace in IR.
The mail is going now..
just disabled
Content_type, Date in Mapping.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Mail xmlns:ns0="http://sap.com/xi/XI/Mail/30">
<Subject>Mail ALert XI</Subject>
<From>kmadmin</From>
<To>[email protected]</To>
<Date>2006/08/24</Date>
<Content>SQL Server Is Not Working</Content>
</ns0:Mail>
Thanks
SUmit -
SAP PI: Using Variable Header Binding in Receiver Mail Adapter
Hello,
I try to use Variable Header Bindings in the Receiver Mail Adapter. Therefore I wrote the following User-Defined-Function in a mapping:
Java Function Start -
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName1");
DynamicConfigurationKey key2 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName2");
DynamicConfigurationKey key3 = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/Mail",
"XHeaderName3");
conf.put(key1, new String("Test1"));
conf.put(key2, new String("Test2"));
conf.put(key3, new String("Test3"));
Java Function End -
As expected I see the Attributes and Parameters in the Dynamic Configuration in the SAP XI Monitor:
Dynamic Configuration Informattion Start -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Mapping der Request-Message
-->
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName3">Test3</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName2">Test2</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="XHeaderName1">Test1</SAP:Record>
</SAP:DynamicConfiguration>
Dynamic Configuration Informattion End -
Now I configure my Receiver eMail Communication Channel and set the Variable Header Fields as follows:
Adapter Specific Attributes: Checked
Variable Transport Binding: Checked
Variable Header (XHeaderName1): TSender
Variable Header (XHeaderName2): TReceiver
Variable Header (XHeaderName3): TOther
With this configuration I would have expected three new Header fields in the Header of the eMail, the reicever gets. But they are not there.
When I set standard attributes like THeaderTO, THeaderSubject a.s.o this works fine and the values are also set accordingly. Where it the mistake here?
The PI version we are working with is PI 7.0 SP10.
Your help will be highly appreciated.
Thank you,
SteffenHi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad -
Column header in receiver mail adapter
Hi experts,
I have a proxy to mail scenario in which I send a mail with a file attached.
Is it possible to put column headers in the attachment, possibly without changing the mapping?
I mean, working with module configuration in communication channel?
Thanks
Fabio Bonihi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal -
How to set "Cc" field in Dynamic Email address in Receiver Mail adapter
I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards,
Ravi SiddamHi,
If you do not need mail package for other reasons, I suppose it is enough to provide a value in Dynamic Configuration for fields "THeaderTO" and "THeaderCC" and the select "Use Adapter-Specific Message Attributes" and "Variable Transport Binding" in receiver Mail Adapter.
see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm">SAP help</a> for more details.
Regards,
Daniele
Maybe you are looking for
-
Count of non-empty rows of a table
How to I get the number of non-empty rows of a table ? Thanks
-
How to add "profit Center" in Screen varaint of manual bank Statement.
Hi all, Kindlt tell how to add "profit center" in possible filed of Screen varaint of manual bank statement.T-code OT43. Rgds, Alok Sharma
-
Hi i am using RSA for developing the code and i use the following code for looking up the ejb from the servelt deployed as part of the Same EAR file. Object objsessionBeanLookup = m_initialContext.lookup("java:comp/env/ejb/UpdateHistory"); UpdateHist
-
Borderless printing on epson 2100...please help!
Hello, I've been trying to get borderless printing from aperture on my epson 2100. I've selected borderless printing in the Print Settings but it still won't allow me to move the slider down to 0. I've tried a bunch of different page sizes but basica
-
Critique my backup solution please, suggestions?
My system generally looks like this:- /home/data has the majority of my 'work', its a separate partition (by far the largest). /home is also a separate partition. /home/ngoonee doesn't have much, just configs and stuff I was lazy to move (about 20 MB