Receiver payload not seen in sxmb_moni

Hi experts,
i am doing proxy to file...
while checking sxmb_moni....i can see the source payload but unable to see the response payload..and response is in chequered flag without payload..
file communication channel is showing green status..successfull..
help me out how can i check receiver pay load in sxmb_moni...help me out...

hi kiran,
First of all ur scenario is proxy to file means ie. abap proxy to file u want to get the data from abap to file that's it. but why ur asking for payload it will be seen only when u r using mail adapter i.e when we attach the files the payload can be seen.
Reward points if useful,
Regards,
Srinivas.D

Similar Messages

Message not seen in SXMB_MONI

Hello Experts,
We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
When Material is sent using transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
But the corresponding message is not visible in SXMB_MONI of PI.
Please help!
Thanks in advance,
Suraj

Hello Prateek,
Yes it is showing stuck in SM58 with status '::000'
If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
We cannot understand what this status means or how to resolve it.
Please help!
Regards,
Suraj

Outbound payload not visible in sxmb_moni

Hello Guru's,
I have a issue in message monitoring (sxmb_moni). I can't see the outbound payload for the most interfaces.
Do I have to set a parameter somewhere? Does anyone has any suggestion?
Kind regards,
Kamran

Hi people,
Thank you for your replies.
Im going to set those parameters to 1 cuz in our system it had a value of 0.
This goes for all of the messages synchronous and asynchronous. Is there a difference between if we have a asynchronous interface?
Kind regards
Kamran

Sender RFC Message not seen in sxmb_moni

Hi,
Uptill now i must have created 9 RFC To file scenarios ..all of them are working perfectly.
But this tenth one is bugging me up:
Problem:
1. I created RFC destination which is working perfectly fine i.e connection test is successful.
2. When i run the program the function module gets executed successfully, but i dont see any messages in sxmb_moni .In RWB inside communication channel monitoring I can just see is processing started and nothing else for that communication channel.. Whereas for other 9 CCs i can see processing started
& Message processed successfully messages properly..
Any help will be appreciated & points will be rewarded.

Hello,
can you have a look at this weblog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
it's a how to turn on the traces - Logging on the XI
This will help you...
************Reward points,if found useful

Question in BPM, "Payload" Main Document not seen

Hi
I have a BPM that sends msg to a receiver.
Now in sxmb_moni here is what i see in the final message that the BPM delivers to the receiver,
In the payloads section i can only see 1 content "XI_Content(Text/html)" i do not see the MainDocument(application/xml)
Does this mean that my receiver will not receive the payload?
What is the difference between XI-Content and MainDocument????
In my case you thnk it is normal to see only the XI_Content and not the mainDocument???Because in the inbound message the BPM gets both the XI_Content and the MainDocument.
Please help me understand.
Thanks,
Hank

Dear Sadhu,
i am facing the slimier problem. kindly share the solution for the above issue. Also if yoy have any standard doc for Appraisal configuration .... i kindly request you pls share with me on [email protected]

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck.

TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

Try backing it up to your computer with iTunes. Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now. Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

When using facetime, my picture is not seen on the receiving end. How do i fix?

When using FaceTime, my picture is not seen on the receiving end. Help!

Part of training the junk filter is also to mark good messages 'As Not Junk'.
http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

BPM: SendContext not visible in SXMB_MONI DynamicConfiguration

Hi everybody,
I set a sendContext in a sendStep in BPM.
AFAIK in SXMB_MONI the value of the sendContext could be seen in SXMB_MONI under DynamicConfiguration.
But I cant see it although the sentStep is processed.
But I can see is in SXMB_MONI_BPE under SENDCONTEXT.
What is wrong?
The correspondinding entry in condition editor for receiver-Determination is "ProcessStep"? Isn't it?
Regards Mario

Hi All,
Thanks a lot.
But my problem still remains.Let me detail out the settings I have followed.
In the Sender System.
1.WE20(Partner Profiles):Maintained Outbound Parameters for the Logical System name of the Receiver as mentioned in SLD.
2.WE21(Port)
3.SM59(Connection to XI)
In XI
1.IDX1
2.IDX2
3.IR
4.ID
SLD
1.Logical system name for the Sender System
2.Logical system name for the Receiver System
I have checked in Transaction SM58 of the Sender System.
However I do not see any error there.There is no list created, which means that IDoc has left the Sending System ,So is there a possibility that there a problem with the IDoc Adapter.
If so then how do I solve it?
Kindly help me.
Thanks & Regards,
Vanita.

Sender filename in receiver payload without using mapping.

hi Experts,
I have a File to RFC scenario. wherein i need to pass source filename and filepath as parameter to RFC whenever file arrives at source directory.
I am not using IR contents. What could be the simplest way to achieve this.
One way ofcourse is to write an adapter module to generate Receiver payload with the required information.
Can we have even more easier way to achieve this. Can something be done in Content conversion to get the receiver xml payload with filename and filepath?
Regards,
Girish

Hi Girish
You can use IR mapping for a binary source data, but it must be a Java class, not an abap or graphical mapping.
Regards,
Carme.

'Payload not Serializable' with custom WSDL data types in message-style web service

I'm implementing a message-style web service which publishes to a JMS Queue.
I had the web service built and deployed, but noticed that the "sendRequest" message's
part was of type "xsd:anyType." This is not specific enough for our interface,
since it is externally facing and needs to describe the object we're expecting
on the back end.
So I replaced xsd:anyType with mynamespace:MyType, which is defined as a complex
type in the same WSDL document.
My problem is that when I test the web service with the new WSDL (using the client.jar),
I get a server-side exception from the DestinationSendAdapter.doPost() method.
The exception reads:
javax.servlet.ServletException: Payload not Serializable
at weblogic.soap.server.servlet.DestinationSendAdapter.doPost(DestinationSendAdapter.java:129)
The domain object ('classic' JavaBean) that it should map to on the server side
extends a class that implements Serializable, so it should inherit the trait.
So my questions are:
1) Did I properly go about trying to restrict the object type that gets sent to
my Destination?
2) If no, what is the correct way? If yes, why am I receiving the Payload not
Serializable error if the domain object implements Serializable?
Thanks in advance.

Resolved:
Apparently this is the right approach, as it boiled down to a classpath issue
on the client-side. Thanks anyway.

Sender and receiver agreement not cerated

Hi .
I am creating configuration scenario in ID by importing the integration scenario which i created in the IR.
I crated communication channel template also and i added it to the integration scenario in connections.
Query 1?
do i have to create Communication channels also.....even After creating communication channel template (because it is not seen the ID below communication channel )
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario (sender and receiver agreements are not getting created automatically)peace tell me what is the reason???.
and how can i resolve this...
thanks
shakif

Hi Mohamed,
Query 1?
do i have to create Communication channels also.....even After creating communication channel template
Yes You have to create as it's just a template that u created in IR. But u can use the same for creating CC.
Check this link for what's the Diff. B/w CCT in IR and CC in ID
Re: Communication Channels
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario
Yes. it will create automatically.
Just check my posting in Wiki for simple File to IDOC scenario might be u missing something
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
and check my reply in this thread
Re: Doubt in transfering integration scenario from IR
Regards
Sachin

DBout segment missing in receiver payload

Hello,
We have a problem with a scenario at our customer.
We created a B1if File to B1 scenario.
For some files we get a failure message in the message log saying:
"DBout segment missing in receiver payload (handover to database not possible) "
When we do a retry with restart in-process (biu processing and outbound) it works.
Sometimes a second retry is needed.
Any ideas?
Best regards,
Steven

Hi Mark,
Thank you very much for the explenation!
I will try this and let you know if I got it to work
I'm very new to B1i as you can see.
I found the solution to our problem.
The processing of the B1if File to B1 scenario is devided into 3 scenario's.
First scenario: a timer checks every minute for files in a certain directory 'IN'. 1 file is copied into another directory 'PROCESSING' and called ORDER.csv. The original file is being cut and paste into directory 'SAVED'.
Second scenario: check if file ORDER.csv exist in directory 'PROCESSING'. Some checks and some processing are done on the file.
Last scenario: every minute this is run with a timer. Some checks are done and the objects are created in B1.
The processing of 1 file takes about 1 minute to 1 minute and a half!
The problem was that a timer was set to check every minute if there was a file. (first scenario).. offcourse when the processing is still busy this will fail and I believe that is why a file was almost always skipped.
I changed the timer to every 2 minutes and now everything works like a sharm!
Problem is that it takes offcourse twice the time as before.
Do you or anybody else knows a possibility to speed this up?
Is it possible to create the scenario in 1 scenario instead of 3? or maybe 2?
Kind regards,
Steven

Now have iphone6 and signed for different type lower cost account. Not seen on billing service. to have started Oct 1,2014

**after receiving iphone6 and signing 2 year contract, negotiated for a change in plan with lower cost and discount... not seen on october bill as promised..totally unable to obtain help on phone to verizon. thanks

Thanks for the response. I had the 65 advantage plan for 2 years. Service rep at Verizon store assisted me when I activated my new iPhone 6. She noted that over the 2 years i had used only a few minutes of talk, one to 2 texts per month ( at a fee of $. 20 each ) and a minuscule amount of data... and that the phone was for emergency contact to me from my disabled invalid wife only. She searched and found a discount special plan for a savings of $15.00 per month with a final monthly fee before taxes of $45 and not $59 per month to start on Oct 1st. It does not have a name to the plan just that it carries this special discount. That is all I can tell you. Thanks for the assistance. Await your reply. Thanks
Bob Bonus
[email protected] <mailto:[email protected]> this is Incorrect email........... should be [email protected] Wednesday oct 8th, 2014... do not know if you received this response to your email a few days ago. Sorry for the mistake. Await your response. thanks
bob bonus

How to get confirm whether idoc reached receiver or not?

hi pals,
I want to know how to confirm whether idoc is reached the receiver system or not?
how to find the idoc no in case of idoc failure in sxmb_moni or any tcode for that?
i am looking in terms of sap production systems
thanks
Ruban

ruban,
It is impossible to know the IDoc number in XI system as in this case IDoc is posted in the target system. Here, IDoc gets posted into target SAP system, and while generation of IDoc in target, at runtime IDoc is generated.
To find in XI whether the IDoc has been received or not, you can configure BPM where in a SEND step is configured in the block for which exception branch is defined. And in the exception branch you set 'ThrowAlert' to send an email to recipients.
After triggering the message go to SXI_MONITOR where in you can see its process engine to see whether exception branch is routed. Then you can understand that IDoc did not go to target and otherwise it has gone.
Regards,
Suraj Kumar

Receiver payload not seen in sxmb_moni

Similar Messages

Maybe you are looking for