Receiver side FTPS

Wanted to know if there are any blogs available for receiver side FTPS. i want to pick a file from NFS and post using FTPS.
Thank you.

Hey,
Discussion in the below thread will give you idea
FTPS Sender and FTPS Receiver adapter. Pls help
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/400580c1-8d16-2a10-3eb3-ec1026dae0d5?overridelayout=true
Cheers
Agasthuri

Similar Messages

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?

Hi,
    We are building an IDoc to File scenario in SAP PI 7.1, where a single incoming idoc will create three different output files. Also files must be created in target server in a specific order.
    Our first idea to ensure that files would be created following a specific order was that Message mapping (in Java) build target payload with all three files following expected sequence.
    In addition, receiver file/ftp adapter is setup with a dynamic variable to create each file with a different filename adding also timestamp.
    Testing the scenario, we see that three files are created in target server but when we sort them by creation date, it seems they don't follow always same sequence.
    Sometimes adapter creates File1, File2, File3; next time it created File2, File1, File3 and so on.
    Our problem is that files must be created always with a specific order and we cannot use BPM. Does anyone know if a receiver file/ftp adapter can be setup to create files following specific sequence (EOIO)?
    I know that sender file/ftp adapter can be setup with a quality of service, but I didn't find anything similar for Receiver file/ftp adapter.
    Suggestions will be welcome.
Kind Regards,
Aitor

Hi,
     First, thanks all of you for your quick answers. They were helpful because we learnt a new configuration setting.
     We tried your suggestions but they didn't really fix our problem.
     Finally interface has been re-designed and we will not have to apply this logic, so no issue from our side.
     However, let me continue with this topic in case that somebody else will have the same issue, then it will be able to review this thread.
     When adapter created the files in the target directory (windows server), files had the expected timestamp in each filename. However, if we sorted windows directory contents by "Date Creation", files were sorted different that timestamp shows in the filename.
     For example, adapter created following files:
File1_20090325-115117-169
File2_20090325-115117-174
File3_20090325-115117-180
     But when we sorted windows folder contents, files were sorted as follows:
File2_20090325-115117-174
File1_20090325-115117-169
File3_20090325-115117-180
     It seems that timestamp was pre-assigned by the adapter, but when adapter created the files, it did it with a temporary name and finally assigns the filename. If a file size was bigger than other, maybe it takes more time and windows creation date is higher.
     If so, it means that adapter is not following same instructions as itu2019s indicated in "maintain order at runtime" checkbox.
     Do you know if there is any way where we can push also the order in the adapter as we did in interface determination?
Regards,
Aitor

Part of sender File name at the receiver side?

Hello All,
My requirement is like this.
iam picking the file from FTP server and place the file in another FTP server with out mapping.
I need to use part of sender file name to create the receiver side along with current date.
for example.
sender side file name : LM01000008.txt
recevier side file name need to generate : LM01dd/mm/yyyy
Please let me know how to achive this.
i tried with the blog given below, but partial file name is not possible with that blog.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0229698450DB11989196758750510369End?blog=/pub/wlg/6400
Thanks and Regards,
chinna

Hi Chinna,
Use this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
SimpleDateFormat dateformat = new SimpleDateFormat("yyyyMMdd");
String timestamp = dateformat.format(new Date());
String newfilename=fileName+timestamp+".txt";
// change to new file name
conf.put(key, newfilename);
return "";
Regards
Suraj

File to File (get confirmation from receiver side)

Hi All,
I have a FILE to FILE scenario (assynch of course) (both FTP) and the manager of this project is asking us to have a confirmation when the interfaces have been performed and received sucessfully in receiver side and LOG it in a table of our DataBase (Oracle).
I'd like to know what is the best way to achieve this ? How can the sender side know if the file has been received sucessfully in receiver side and thus the interface can log it in a DB table as sucessful ?
Thank you,
Regards

Hi Diego,
you can setup an Business Process where you receive the file sender message, send to the file receiver asking for an acknowledgment and define an exception branch for that. In the exception branch you map the error cases (for the two receiver of the status). In the normal branch you map the positive response for the status receivers. Finally you have the two send steps to the status receivers.
receive step
block
-normal branche
      --send step to file receiver
      --transformation positive 1
      --transformation positive 2
-exception branche
      --transformation negative 1
      --transformation negative 2
end block
send step status receiver 1
send step status receiver 2
Regards,
Udo

Append the data in file at receiver side

Hi All,
I want dump the data frm SAP tables. the data is hughe so we are sending the data in slots from ECC like 50K recoerds at a time and after that to collect that i using the append parameter at file receiver side and records are getting appended in file only that is correct
but my one doubt is
let say monday the records get append into file at receiver side and on tuesday again the records will get appended in same file....it will be problem for this i used create parameter with overrite my question if i am using create then we can not use append ........
please suggest...........
Regards

Hi gangadhar,
Append will work like this..
if there is no file ..create the file and if file already exists then appends the data to the existing file..
in your case when you create the file with day i.e file_day ..first time when you send 50K records file will get created..
if you send another 50k in the same then will get appended to the same...
in case if you send the another 50K set another day..then a new file will get create as there is no file available with taht file name
i.e filename_nextday...
Hope this clears all your queries
HTH
Rajesh

Problem with Stored Procedure exection in Sender and Receiver side of JDBC

Hi All,
I am facing problem while executing Stored Procedures using sender and receiver sides of JDBC adapter.
Here is my SP in Oracle DB :
PROCEDURE EMP
( ID IN VARCHAR2,NAME IN VARCHAR2,PROCESSED IN VARCHAR2 ) AS
BEGIN
   INSERT INTO EMPLOYEE VALUES (ID, NAME, PROCESSED);COMMIT;END EMP;
Now I want to execute this SP using sender JDBC channel and receiver JDBC channel.
Can anyone please help me executing this SP?
Regards,
Soorya

Hi Soorya,
The receiver Data type should be like this:
<StatementName>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName>
Check the link http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Which DB are you using?? The sender structure will be like
<resultset>
<row>
<field1></field1>
<field2></field2>
<field3></ field3>
</row>
</resultset>
Search SDN you will get lot of examples
Regards
Suraj

Mandatory fields in receiver side

Hi Experts,
Is there any easy way to find out, what are the mandatory fields(receiver side) we have to map during mapping?
Regards
Sara

Basic question
Sender side :
1. Sender1_Root
2. Sender1_Child1
3. Sender2_Root
4. Sender2_Child1
Receiver Side:
1. Receiver_Root
2. Receiver_Child1
3. Receiver_Child2
1. Sender1_Child1 is mapped to Receiver_Child1
2. Sender2_Child1 is mapped to Receiver_Child2
In this case, Do we need to map the Sender1_Root and Sender2_Root to Receiver_Root?
Regards
Sara

File access parameter in file adapter at receiver side

Hi Experts,
1- i am using file adapter at receiver side. i want to create my file with time stamp for that i have given the file construction mode = add time stamp and put file directly .but it is showing time in file name????????
2. i want my file name as TimeSheet_Country_Date_time.csv so for this what value i have to give in file Name Scheme parameter.
Regards

1- i am using file adapter at receiver side. i want to create my file with time stamp for that i have given the file construction mode = add time stamp and put file directly .but it is showing time in file name????????
The addtime stamp will add timestamp as the last part of the filename before the extension.
2. i want my file name as TimeSheet_Country_Date_time.csv so for this what value i have to give in file Name Scheme parameter.
You can achieve this using dynamic file naming UDF in mapping and using ASMA in file adapter.
Use current date function and generate the current date. Then use substring to pick date,time from it and format it according to your requirement (TimeSheet_Country_Date_time).Else you can write a UDF to generate the file name as per your requirement and then pass it to the dynamic filenaming UDF in the mapping.
Search SDN for dynamic file naming.

FCC in receiver side in idoc to file scenario

Hi all,
           I am doing an idoc to file scenario using FCC .I am using FCC in receiver side ,but i am getting my output file in only one line while i want structre to be seprated by new line.for more information i am giving muy file structre.
Record
    header(1to1)
    data    (0 to unbounded)
    footer (1to 1)          header, data, footer are three structre which contain various fields.I have to use fieldFixedLengths as filed separator. I am also using endseperator as 'nl' but its not coming in new line.Please share ur views on this issue.
Regards
Neha

hi neha,
In your scenario
Recordset Structure header,data,footer
header.fieldFixedLengths    = 1,2,3, whatever it is
data.fieldFixedLengths      = similar to header
footer.fieldFixedLengths    = similar to header
header.endSeparator = 'nl'
data.endSeparator = 'nl'
footer.endSeparator = 'nl'
I guess you dont have to do any thing else.
Regards
Pushkar
Message was edited by:
        Pushkar Anand

Problem with file contnet conversion in receiver side.

Hi All,
I have a source strucuture as below.
Header-1.1
Item..1..unbounded.
footer..1..1,
As i am using PI 7.0 , can you any one tell me ..how do i mention item segment is occuring multiple times in the reciever content conversion.If only one segment is comming then the scenario is working but if the item segment is comming with multiple times, it is throwing error.
Can any one let me know how do we achieve this.
Regards,
Chandu.

hi,
There is no need of giving * in receiver side FCC
give the structure as
header,item,footer
try with this one,it will work....
and give corresponding
header.feildSeparator
header.fieldNames
item.feildSeparator
item.fieldNames
footer.feildSeparator
footer.fieldNames
default endSeparator is 'nl'
if fixed length give fixed lengths

How to get the information of the framerate and bitrate in receiving side

Hi,
I want to know if anyone here know how to get the frame rate and the bit rate statistic on the receiving side.
I know that it will be displayed on the info panel with the control component, but actually where can I obtain the stats into my program instead of reading by my eye.
Thanks for helping me.
Best regards
Ferdinand

Hi Raju,
It's basu here,
I used TADIR and TRDIR Tables , But There is no modified Information.
Means, Suppose if i modified any customized object , i want that information also in the Report.
Please Help me on this.
Thanks
Basu
Message was edited by:
karibasavakm Kumbargiri Math

Amplitude is not changing on the receiver side

I am trying to transmit square wave using USRP 2920. If I change the amplitude of square wave in Tx file from 1 to lets say 100. The Tx waveform shows that it is changed but on the receiver side there is no change in the amplitude. Can any body look at my files and guide me why I am not able to see increase in amplitude on Rx file when I increase the amplitude of Square wave on Tx file
Note: I am generating a randon number between 0 to 1. If random no. is greater than 0.5 then the amplitude is 1 or higher but if the random no. is less than 0.5 amplitude will be zero.
Thanks
JK
Attachments:
TX.vi ‏23 KB
RX.vi ‏34 KB

Your not going to get a clean squarewave back on the receive side. The USRP uses a local oscillator (LO) so anything it reads will be interpreted as sinusoidal in nature. This is evedent in the screen shots in the attached .zip folder.
To address your voltage question, assuming your antenna is terminated with a characteristic impedance of 50 Ohms (Zo) and the max power of 100 mW, Power = (approximately) Voltage^2 / Zo
Therefore Voltage = ( Power * Zo ) ^ (1/2) = 2.2 Volts approximately.
What is your overall application? Why are you concerned about the voltage? What are you testing?
Brad S.
Application Engineering
National Instruments
Attachments:
USRP.zip ‏216 KB

Dynamic File Name on Receiver Side using XSLT mapping

Hi,
My scenario is a Proxy to File scenario.The File on the receiving side is a TEXT file generated due to XSLT mapping. The file name has to be dynamic like- TEST<DDMMYYHHMMSS>File.DAT.
If somebody knows how to do the same please help.
Regards
Ritu

Hi Ritu,
I agree to Krishna.With your XSLT mapping create a XML output which can be converted to a text file with content conversion.
And for the dynamic file name, i guess its the date that matters which needs to be in DDMMYYHHMMSS format. the same can be accomplished by a Java function and calling it in your XSLT .
Do refer this weblog it will help you accomplish the same.
>>> /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
Regards,
Shabarish

How to Get the Source File Path in the Receiver Side

Hi Experts,
Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side .
According to the Michal Blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here we Are Able to Get only the File Name.
But If I Want to get the Total File Path Also means What Should I Do Here ????
Please Let Me Know
Regards
Khanna

Khanna,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey fkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
DynamicConfigurationKey dkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String fname = conf.get(fkey);
Sring path = conf.get(dkey);
String final=fname""path;
return ""final"";
Best regards,
raj.

Receiver side FTPS

Similar Messages

Maybe you are looking for