Receiver SOAP Adapter (HTTP AXIS)

Hi Experts,
I need to use receiver soap adapter to communicate with a WebService, actually it is a AXIS service i can see when i give the soap url in web browser.
my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
when i use SoapUI to test the webservice, it works fine. But when i use receiver soap adapter with HTTP (without AXIS), it is responding with the belwo error.
<sap:Error ...>
<sap:Category>Application</sap:Category>
<sap:Code area="UNKNOWN">APPLICATION_ERROR</sap:Code>
<sap:AdditionalText>Application Fault</sap:AdditionalText>
<sap:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System/Axis/sample">host name</sap:ApplicationFaultMessage>
<sap:Stack/>
</sap:Error>
Experts, please help on this, the major question is HTTP AXIS is required when target web service is an AXIS service?
Thanks in advance.
Regards,

>>my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
You are going to consume webservice. You can use standard SOAP adapter itself to consume the webservice that is built with axis framework.
Do you have some specific user authentication procedures like SAP Assertion Tickets, username token etc and some specific encapsulation formats (MIME, DIME, MTOM),WS Reliable Messaging and so then you need SOAP Axis adapter. If you need to consume webservice with standard transport protocol (HTTP or HTTPS) and client authentication etc , our standard SOAP adapter is more than enough.
Refer this link what axis soap adapter supports

Similar Messages

PI 7.1 receiver SOAP adapter using https

Hi all,
In PI 7.1 receiver SOAP adapter using https, what are the configurations necessary in PI box?
Certification, and key store values, security etc etc
-Michael.

>
Michael Johnson wrote:
> I did n't find anything related to 7.1 version
Some leads are provided by help: http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/992d4142badb2be10000000a1550b0/frameset.htm
Regards,
Abhishek.

Security in Receiver SOAP Adapter (Axis Framework)

Hi Experts,
I have one requirement regarding Security in Receiver SOAP adapter
My client wants UserNameToken security while sending synchrononus messages from SAP system to third party.
Is anyone knows how to achieve this in AXIS framework(Receiver SOAP adapter) of PI 7.0 ?
Thanks in advance.
Regards
Anku

This is described in SAP Note 1039369 FAQ XI 3.0/7.0 Axis Adapter

Receiver SOAP Adapter error

Hi All,
 I am getting this response error message in my receiver SOAP Adapter while invoking a synchronous webservice.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ProcessMessageResponse xmlns="http://Sleek.Integrator.Messaging" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ProcessMessageResult>Value cannot be null. Parameter name: Request string is a null reference.</ProcessMessageResult>
</ProcessMessageResponse>
Thx in advance
Ravijeet

Hi All,
 I am still getting the same error value is null. I am not able to track what could be the cause of the error. If I am taking the message from SXMB_MONI and using it in a client tool it is successfully calling the webservice.
Do we need to explicitly mention in some configuration that content type is soap/xml. SOAP header is omitting the content type or is not specifying "soap/xml" as the content type.
I am interacting with a WAF websevice, is there any compatibilty issue with Windows Webservice and SAP XI?
Also what should I pick as the SOAP Action from this wsdl file definition
<wsdl:portType name="IMessageProcessor">
 <wsdl:operation name="ProcessMessage">
 <wsdl:input message="tns:IMessageProcessor_ProcessMessage_InputMessage" wsaw:Action="XXX.Messaging/ProcessMessage"/>
 <wsdl:output message="tns:IMessageProcessor_ProcessMessage_OutputMessage" wsaw:Action="XXX.Messaging/ProcessMessageResponse"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:service name="MessageProcessor">
 <wsdl:port name="BasicHttpBinding_IMessageProcessor" binding="i0:BasicHttpBinding_IMessageProcessor">
 <soap:address location="http://XXX.com/cardax/provisioningservice"/>
 </wsdl:port>
Thx in advance
Ravijeet

SOAP -Client Certificate Authentication in Receiver SOAP Adapter

Dear All,
We are working on the below scenario
SAP R/3 System -> XI/PI -> Proxy -> Customer
In this, SAP R/3 System sends a IDOC and XI should give that XML Payload of IDOC to Customer.
Cusomer gave us the WSDL file and also a Certificate for authentication.
Mapping - we are using XSLT mapping to send that XML payload as we need to capture the whole XML payload of IDOC into 1 field at the target end ( This was given in the WSDL).
Now, how can we achieve this Client Certificate authentication in the SOAP Receiver Adapter when we have Proxy server in between PI/XI and Customer system.
Require your inputs on Client Certificate authentication and Proxy server configuration.
Regards,
Srini

Hi
Look this blog
How to use Client Authentication with SOAP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Also refer to "SAP Security Guide XI" at service market place.
ABAP Proxy configuration
How do you activate ABAP Proxies?

Error in Adapter engine of receiver soap adapter

Hi All,
There is one production issue i am currently facing in receiver SOAP adapter while interacting with third party web service(Asynchronous call).
Below is the description i am getting in audit logs.
Success SOAP: completed the processing
Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Success SOAP: sending a delivery error ack ...
Success SOAP: sent a delivery error ack
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired.
Error The message status set to NDLV.
Moreover this is a production issue and interface was running fine till last friday.
Has someone ever faced this issue ?
Please provide your valuable inputs on this.
Thanks
Anku

Hi,
Search in sdn with your error message string,you will find ton of links.
HTTP401 error occurs for many reasons.
still no solution let us know..
Regards,
Raj

Error using SSL on Receiver Soap Adapter

Hi there,
I'm having some problems on connecting to a third-party application running a webservice (meaning, through Receiver Soap Adapter). The third-party appl. demands us to use a SSL connection (its url starts with https), with user authentication through certificate.
We've installed SAP Java Cryptographic toolkit and have a proper certificate configured on the KeyStorage entry, on Visual Administrator.
On Soap Adapter, I've configured HTTP Transport Protocol and have selected the "configure certificate authentication" option and selected the certificate, filled the mandatory fields (target URL and soap action) but I keep getting this error message on SXMB_MONI: "com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket".
Is there anything else than installing SAP Java Cryptographic Toolkit to enable SSL on Soap Adapter? Is there another configurations that need to be done?
Thanks in advance,
Henrique.

Hi
can u please tell me, how u r able to resolve the problem
i am also stuck in the same error
basically i am working on SSO b/w three systems.
EP>XI>R/3
i am able to do the SSO between the EP-->XI
but when i try with EP-->XI->R/3 it is giving me error at the receiver side means receiver soap adapter is not accepting the SAP Logon Ticket.
can u please tell me what entries should be given in the certificate authentication fields.
please provide the solution.
Thanks & Regards
Rinku Gangwani

Receiver SOAP adapter in XI 2.0

We are using receiver SOAP adapter in XI 2.0 and 4.6C R/3 system. Recently we started having this problem when vendor upgraded their webmethod server to post invoices to our XI 2.0. When vendor post 10 invoices to XI and all are posted good in XI but some of invoices give the bad response to the vendor's server as below and vendor's server keep posting the invoices with the bad response until they get good response.
<value name="soapResponseData"><SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: response is not an HTTP response</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></value>
Any help on this is appreciated...
Thanks in advance!
Mrudula

hi,
Check these threads, might be helpful.
Soap Adapter
XI3.0: SOAP-Adapter Exception
Thanks,
Tirumal

Error when setting dynamically the target URL in receiver SOAP Adapter

Hi,
I'm setting dynamically (from the mapping) the target URL in the receiver SOAP adapter:
String url = "http://mosxd30:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=DUM&receiverParty=&receiverService=&interface=SI_OA_CustomInvoiceData&interfaceNamespace=urn:repsol.com:laboratory:firma";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(key, url);
The receiver adapter fails with:
"invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized"
Reading weblogs, etc, the most probable cause for this is a wrong target URL, but then what I did was to set it as a fixed URL in the C.Channel, and it worked, so the URL is fine.
In the communication channel, I'm using "Configure user authentication", with a user and password, and what I think it's happening is that if I use another different URL dynamically, the channel is ignoring the user authentication settings.
Any ideas?
Thanks

I forgot to say that I've checked the SAP note "FAQ Soap adapter", and it says:
Q: I get an authorization error "401 Unauthorized" from the adapter's servlet. What went wrong?
           A: The adapter's servlet is protected by default. You must use one of the user names assigned in security role xi_adapter_soap_message for component XISOAPAdapter. Please consult the documentation for Visual Administrator to view and change the security setting.
           The user authentication of the SOAP adapter is not part of the SOAP adapter but of the web container of the J2EE engine. The default authentication setting is defined in the web.xml descriptor file of the SOAP dapter web application. This setting may be modified from Visual Administrator with some restriction. Please refer to the security documentation for the J2EE engine.
           Please note that 710 onwards there is no Visual Administrator instead the Netweaver Administrator is to be used to assign the roles to the user to access the SOAP adater servlet.The user must be assigned one of the following roles SAP_XI_IS_SERV_USER, SAP_XI_APPL_SERV_USER, SAP_XI_DEVELOPER_J2EE, SAP_XI_ADMINISTRATOR_J2EE.
The target URL is a sender soap adapter (the result of one interface is sent to another one via soap adapter), and it's this one which is complaining because of the authentication I think. But I don't know why it's ignoring the user authentication flag I'm using.

Receiver SOAP adapter SSL error - client certificate required?

Hi all,
Problem configuring SSL in XI 3.0 NW04 SP17....
I have followed the config steps from Rahul's excellent weblog at <a href="/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter">How to use Client Authentication with SOAP Adapter</a> (my Basis team have done the Visual Admin steps) and am going through his example as it closely matches my requirement. So, I have a test receiver SOAP adapter sending messages to a web service URL defined for a sender SOAP adapter. My test scenario is:
Sender File -> Receiver SOAP -> Sender SOAP -> IDoc Receiver -> IDocs in R/3
The problem components are in italic and underlined above. My Receiver SOAP Adapter has the web service URL, Certificate Keystore Entry and View entered. If, in the Sender SOAP Adapter, I have an HTTP Security Level of HTTPS Without Client Authentication, the interface works fine (note that Rahul suggests you untick the User Authentication in the Receiver but with this Security Level, it seems to work with or without it).
The problem is when I set HTTPS With Client Authentication in the Sender. I then get the following error in the message monitor:
SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException - com.sap.aii.af.mp.module.ModuleException: java.security.AccessControlException: client certificate required caused by: java.security.AccessControlException: client certificate required at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1111) at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103) at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:250) at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103) at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:166) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:421) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.security.AccessControlException: client certificate required at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:843) ... 22 more
Has anyone got any idea what this could be caused by?
Many thanks,
Stuart Richards

Have you configured the https port with that keystore entry?
Check out these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/881e3e3986f701e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/15f73dd0408e5be10000000a114084/frameset.htm
Regards,
Henrique.

Receiver SOAP adapter - User authentication question

XI experts,
Here is the scenario - IDOC > XI > SOAP - Ansynchronous call..
I need your all help to understand the user authentication on the "Receiver SOAP Adapter"... We are using "HTTP" transport protocol.
I believe, the userid which we entered in the communication channel needs to have proper security on the web server. The Web server URL starts with "http://lsme
01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

XI experts,
I need an answer to the following question....
The Web server URL starts with "http://lsme01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

Receiver SOAP Adapter Use Query String

Hello everybody,
I want to include in my Receiver SOAP Adapter the message id as part of the URL String, but I need to include only the MessageId value, if I use the Use Encoded Headers and Use Query String options it includes all the header fields as part of the URL, is there a way to define only the fields that I need?, thanks in advance.
Regards,
Julio Cesar

May be you could try to use adapter specific message attribute "TServerLocation". This will help you set the dynamic URL.
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
Regards,
Prateek

Target url for receiver soap adapter

Hi everybody
where will I get the target url to enter in the receiver soap adapter parameters? I got the link from wsdl under "address location"..But when I open the link from the internet explorer I could see an empty wsdl
<faultstring xml:lang="en">SRT: Wrong Content-Type and empty HTTP-Body received</faultstring>
thanks
Ramya

Hi Ramya,
When you try opening the URL using web browser, you are not sending any data and hence in response you get an empty message.
But at the same time, the message shows you that the service corresponding to that URL is invoked, activated and running.
Give the same URL in your receiver communication channel and try execcuting the scenario, as far as receiver URL is concerned, it should work.
-Tanaya.

Testing a "Receiver SOAP Adapter" - Calling a remote webservice from PI

Hi ,
I am trying to call a remote webservice from PI 7.0.
The WSDL file is successfully imported to PI to create the required message types.
The "receiver SOAP adapter" is configured as the communication channel.
I would like to know the ways of testing the remote webservice from PI 7.0.
Thank you,
Panda

Hello there!
I think this link should help you
https://help.sap.com/saphelp_nwpi71/helpdata/en/46/793034608c0ad3e10000000a11466f/frameset.htm
Thanks and regards,
Caio Cagnani

Receiver SOAP Adapter - Connection Parameters

I have a scenario where I need to pass some data (authentication data) to a web service.
I tried using Connection Parameters - Connection User Authentication, and it seems it does not go through SOAP HEADER.
Does anybody know I can pass data to a Web Service without using payload??
Actually I need to pass information set up in communication channel like user authentication.
Thanks and Regards,
Fabio Ramos

Hi Carlos,
The link(pdf) is opening fine.... Just try again.
It actully explains your need...
Also go through this info below and see if it helps:
1) Check the wsdl message,mapped message (input to the SOAP Adapter)
2) Check the Target URL in the SOAP Reciever Adapter. Also SOAP Receiver Adapter Parameters -
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
3) Try to test the WebService -
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
4) Also check these links -
Receiver SOAP Adapter Error: invalid content type for SOAP: TEXT/HTML
Problems with soap adapter?
You need to mention the Target URL i.e URL of the WSDL file.
Regards,
Abhy
Message was edited by: Abhy Thomas

Receiver SOAP Adapter (HTTP AXIS)

Similar Messages

Maybe you are looking for