Receiving a Alert stating that it could not initialize the security component

The complete Alert announcement. Foxfire will load but will not access the internet. My Explorer browser and email does work.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Similar Messages

I am receiving an alert message that reads: Could not initialize the application's security component.

Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

See this support article:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Everytime I use firefox to connect to the internet I get an alert saying that firefox could not initialize the applications security component. What does this mean and how do I fix it?

When I use firefox to get on to the web I get the following message everytime: "Alert: Could not initialize the applications security component. The most likely cause is problems with files in your applications pforfile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security feactures." Once I click the "OK button" at the bottom of the alert box firefox starts but does not act right. For instance it will not let me look for software updates. When I click on "Check for Updates" from the "Help" drop down menu I get a message stating: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: Update XML file malformed (200). You can update firefox manually by visiting this link and downloading the latest version."

The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

When I open Firefox in my laptop, I get an alert message that says that "It could not initialize the applications security component. The most likely cause is problems with files in your application's profile directory, etc"

This morning it was working fine, but I tried to put 2 addons, "adblock" and "Forcastfox Weather" .
I have both of this addons in my Desktop as well as in Ubuntu. The problem is in Windows XP

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

I have unloaded and reloaded Firefox and it keeps telling me that it could not initialize the application's security component, how do I do this?

Hi All: I need help...lol I have used Firefox for about 8 years now with NO problems, now I have a new Toshiba and I cannot get Firefox to work smoothly. I am using Windows 7. I do not know how to initialize the application's security component. Many thanks for ur help. Charlotte Mueller

Did you try to rename the file cert8.db (cert8.db.sav) in the profile folder and maybe secmode.db as well?
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

FDS Could not find the Coldfusion Component

I am currently running CFMX 7.0.2 (w/ a multiserver
configuration using IIS) and FDS 2.0 w/ JRun4, using Flex Builder
2.0.1 Standalone as my Flex IDE.
I am able to do remoting without a problem, and I am also
able to run the FDS CRM sample, which uses Java. But when I try to
use FDS + CF, it tells me "Could not find the Coldfusion Component
samples.contact.ContactAssembler".
I have been following the Contact Manager example, originally
posted by Tom Jordahl and later corrected by Steven Erat.
http://www.talkingtree.com/blog/index.cfm/2006/12/20/FDS-CFMX702-ContactManagerApp
I am pretty sure that I have done everything correclty:
- I have all the mxml files placed in the
E:\jrun4\servers\default\samples\dataservice drectory, and have
modified the DataService destination to point to "cfcontact", not
"cfcontact-default".
- I have added the destination element from
E:\resources\config\data-management-config.xml to
E:\fds2\jrun4\servers\default\samples\WEB-INF\flex\data-management-config.xml
- I have added
<adapter-definition id="coldfusion-dao"
class="coldfusion.flex.CFDataServicesAdapter"/>
to
E:\fds2\jrun4\servers\default\samples\WEB-INF\services-config.xml
- I have unzipped the CF files into my CF root
(<CFroot>/samples/contact/) and the access file into
<CFroot>/samples/contact/db/. I also tested the CFC's to
makes sure they worked properly on their own
- I have made a datasource called FlexDataServices pointing
to the access file, and made sure it works correctly
- I have started the FDS server with no errors
But when I run the app from
http://localhost:8700/samples/dataservice/contact/contactmgr.mxml,
it gives me that error: "Could not find the Coldfusion Component
samples.contact.ContactAssembler".
So i know FDS works with Java, its CF that is giving me the
problem. Could it have something to do with the fact that I am
using IIS for CF and JRun4 for FDS (even though I dont think so
since the calls to the cfc's are not http, or so think)
Any help would be greatly appreciated...i have been trying to
get this to work for a couple of days and would love to move on.
Thank you.

In the services-config.xml, make sure your endpoint uri for
the cf-polling-amf destination points to your ColdFusion server.
You may need to replace the {server.port} and/or {context.root}
with the actual values.
For example, if you ColdFusion Server is running on port 8500
your setting might look like this:
<endpoint uri="
http://{server.name}:8500/{context.root}/messagebroker/cfamfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>

I received an alert stating that my iCloud and I message accounts are registered on a previously deactivated computer, which is now registered to another person. Can I deactivate it remotely?

I received an alert stating that my iCloud and I message accounts are registered on a previously deactivated computer, which is now registered to another person. Can I deactivate it remotely? The computer is no longer in my possession.

Hi,
If you have the means to prove the computer was yours and that you sold or gave it away then you could try starting here
http://www.apple.com/uk/support/itunes/contact/
You can access this page for a Local to you version from iTunes when it is logged into the Store and going to the bottom of the page and clicking Support.
In the page that appears in your Browser go to the bottom of the menu and click Contact Support.
In the page linked above (or your local version) click the iTunes Store Contact point on the right hand pane.
After than follow the options for Managing your Account until you are offered an email link.
Email them the info.
9:50 pm Tuesday; July 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I RECEIVED AN ERROR MESSAGE THAT I COULD NOT MAKE OR RECEIVE CALLS AND I HAD TO RESTORE VIA ITUNES. I HAVE DONE SO AND LOST LOADS OF APPS ETC (MY FAULT FOR NOTBACKING UP) BUT STILL UNABLE TO MAKE OR RECEIVE CALLS.

Phone is only a few months old and was working fine last night - it ran out of battery but on being charged up this morning it was effectively locked. I received an error message that I could not make or receive calls and I had to restore via itunes. I have done so and lost loads of apps etc (my fault for not backing up) but still unable to make or receive calls. Anyone had anything similar and can advise who I should contact or what I can do.
Thanks,

try contacting your carrier and see whats going on.

HT201364 I just received my new macbook pro with 16gb, 2.3 GHZ & for some reason I get a message stating that I do not have the system requirements. Help?

I just received my new macbook pro with 16gb, 2.3 GHZ & for some reason I get a message stating that I do not have the system requirements. Help?

What are you trying to do? If you have a brand new machine, you don't need to download and install Mavericks. You already have it.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

What should I do about the alert "Could not initialize the application's security component...." Firefox no responding.

When I open up firefox I get the alert:
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
When I click OK I get my home page (google), but nothing works: no web sites will open. I have downloaded the new version of firefox and carried out a defraggle without success.

This solution worked for me:
http://support.mozilla.com/en-US/kb/Could+not+initialize+the+browser+security+component
The step that worked for me was to locate and delete the cert8.db file.

Alert! "Could not initialize the application's security component..."

I started getting this alert after a restart last Saturday (2-22-2014) and Thunderbird freezes before it is fully operational: (incorrect application behavior?)
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I have over 500 GB free on the hard disk and have checked the directory TTBOMA. As recently as this
morning I again uninstalled TB using the TB uninstall utility, rebooted and reinstalled from the Mozilla website. Nada,
Toshiba Satellite L875D
Windows 8
Troubleshooting info:
Thunderbird
Version 24.3.0
User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0
Any help out there?

Delete the cert8.db file in the Thunderbird profile folder.<br />
This will remove all intermediate certificates that Thunderbird has stored.
*http://kb.mozillazine.org/Profile_folder_-_Thunderbird
* https://support.mozilla.org/kb/couldnt-initialize-applications-security-component

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Receiving a Alert stating that it could not initialize the security component

Similar Messages

Maybe you are looking for