Receiving an error message and time capsule will not back up!!

I am getting this error message, The backup disk image “/Volumes/Nikki Worstell1's Time Caps MacBook Pro.sparsebundle” could not be accessed (error -1).  Right now I cannot back up on my time capsule.  Any suggestions??

See # C17 in this excellent support document by Time Machine wizard Pondini.
http://pondini.org/TM/Troubleshooting.html

Similar Messages

  • New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup.

    New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup. The TC will not allow me to delete or start a new backup disk. My 2024 MacBook Air did the same yesterday but today it backs up.

    Seems to be working now. I left the MacBook on all morning trying to back up and now works.

  • Time capsule will not back up any more

    My Time Capsule will not back up anymore. I have a message stating there is not enough storage room. I have the setting to delete the oldest backup to make room for the newest backup. Any suggestions?

    When you upgrade the OS, it produces massive backups. Mavericks in particular has produced all kinds of issues for people.
    You have several choices..
    1. If nothing in the backup is important to you.. erase the TC and start over. That is the easiest.
    2. If you want to keep the old backups then archive the existing sparsebundle to USB drive plugged into the TC.
    Then erase the disk and start over. That is good way as once TM has established its routine.. and you are certain nothing in the old backups is needed you can wipe the USB.. after 6months or 1year or whatever.
    3. Plug the USB into the TC and use that as the target and start a new TM backup.
    4. Plug the USB into the computer and use that as the target for TM.
    5. Delete older backups in the sparsebundle yourself. I place this last, as it is the worst option IMHO.
    http://pondini.org/TM/12.html

  • Time Capsule will not back up address book

    Fior some reason Time Capsule will not back up my address book. When I delete an address and start up Time Machine, it will show my address book screen. However all my "older" address book screens in time machine are blank. I have searched various forums but have not been able to find other topics on this issue. Is here anybody who has a clue (the address book is not exempted for back up)?

    I just checked to see if TM was backing up my address book, and at first I saw the same thing you're describing, but after a minute or so, old backups appeared. Have you waited a minute to see what happens?

  • Time capsule will not back up/sparse bundle is already in use?

    Time capsule will not back up/sparse bundle is already in use?

    Thank you.  After reading more, I turned off time capsule in system preferences, shut down computer, unpluged and pluged back in time capsule.  Turned computer back on and the problem went away and time capsule successfully backed up.
    There is an old rule in boht PC and MAC world, try reboot first, ask later.  I often forget it.
    Thanks again.
    Quarto

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

    I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the  backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

    I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

  • Time capsule will not back up my iMac since I replaced the hard drive

    I replaced the hard drive in my iMac, now time machine won't back up to time capsule because there is not enough space. I believe time machine/time capsule thinks the new hard drive is a new computer and therefore must perform a new complete backup even though the data on the new hard drive came directly off the old hard drive (the was backed up on time capsule. Our time capsule is currently backing up two computers (both Macs). How do I get time capsule to start backing up the new hard drive?

    You'll have to be more specific -- that's like emailing an auto mechanic saying only "My car won't start."
    Has it ever worked?
    Does your Mac recognize your Time Capsule?
    Do backups start?
    If so, do they hang, or fail?  If they fail, with what message?
    Start with Time Machine - Troubleshooting.   It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

  • Time capsule will not back up after lion upgrade

    HI since I upgraded to Lion, my MAcbook AIR 11' will not backup to time capsule. It just gets stuck on 'preparing backup'...any ideas ???
    thanks

    See #D1 in Time Machine - Troubleshooting.

  • HT4623 after doing a update I got an error message and now itunes will not reconize my phone

    all I can see on my phone screen is the itunes logo and the connector picture and when I plug it into the computer, itunes doesn't reconize it...
    This happen during a update

    Try the troubleshooting steps in item #5 at the bottom of this article: http://support.apple.com/kb/TS1538, under "If the device is not recognized while in Recovery Mode".

  • Time Capsule Will Not Connect to the Internet

    I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

    I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
    o Open AirPort Utility - Click Manual Setup
    o Click the Disks icon
    o Click the Disks tab just below the Disks icon
    o Click the Erase button in the center of the window
    The Quick Erase option will be fine for your purposes. This will only take a moment or two.
    When you are ready to backup the iMac,
    o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
    o Open System Preferences (gear icon) on the dock
    o Open Time Machine
    o Click Select Disk
    o Click on your Time Capsule to highlight it
    o Click Use for Backup
    The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
    Message was edited by: Bob Timmons

  • I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    Hi mjsa1,
    Please see Error "The Organizer Database is damaged and will be reset..." | Acrobat 9.
    If you're still having trouble, please let us know!
    Best,
    Sara

  • I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use.  The time capsule is not backing up any files.

    I'm receiving this error message about my Time Capsule:
    "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use.  The time capsule is not backing up any files.

    1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
    2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
    ☞ Disconnect and reconnect the power adapter.
    ☞ Select the device in the AirPort Utility application and then select
              Base Station ▹ Restart
    from the menu bar.
    If AirPort Utility notifies you of a firmware update, install it.

  • I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    This is asked at least 5-6 times a day here.
    Look at the right hand column.. more like this.
    It is a bug in Mountain Lion.
    Read C12 http://pondini.org/TM/Troubleshooting.html
    But the fast solution.. unplug the TC.. count to 10.. plug it back in.

  • HT4993 i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

Maybe you are looking for

  • IOS iWork how to change legend labels

    Hi. Having trouble with Numbers for iOS. I made a spreadsheet and placed a chart and connected the columns to display the information in the chart. I'd like to add a legend, but when I do, I get "untitled" for each color (or column) in the chart. I'v

  • HT201343 MacBook Pro Airplay

    Hi, I have a MacBook Pro (Early 2011) and a 3rd generation Apple TV. Both are updated and runing in the same network. Hoever, I can manage to enable airplay. I don't find the mirroring menu and in the display settings I'm not allowed to change to the

  • How to divide several timelapse squences gone into lightroom

    Several timelapse sequences are in lightroom which need to be separated into folders. Unfortunately this was not done beforehand. How can I now put these sequences into separate folders in lightroom.?

  • Getting error -36 while copying from mac HD to usb HFS+ drive

    Hi first off, id did google this stuff.. but couldn't find a solution. i tried all the dot_clean stuff without result. i'm running the latest update of snow leopard 10.6.7 so here's the situation: i've got this 1TB FAT32 usb-drive filled with backups

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors. I tried to reinstall driver. I downloaded new codec I tried Microsoft FIX IT  Nothing worked. Need some help. Thank you!! Paul