Receiving bitlocker error in Event Viewer whenever i attach an external HD to my desktop (non are encrypted with bitlocker)

Hello All,
Seem to be having a problem recently.  Whenever I attach any external drive to my Desktop I receive the following error in Even Viewer.  I never encrypted any of the drives in question with bitlocker.
Encrypted volume check: Volume information on \\?\Volume{7cc70383-5d6b-11e0-855c-001c25a5a540} cannot be read.
Event ID: 24620
And I cannot access my drive information.    At first i thought it may be an issue with one of the drives I have partially encrypted with TrueCrypt but I tried several other unencrypted drives and I receive the same error and I cannot access the
data on my drives.
I tried to access the Bit Locker Recovery tool program (downloaded the VISTA Version since there was no Windows 7 Version that I could find), but it did not allow me to install the recovery tool to attempt some kind of fixing.
The strange thing is that I do not have Windows 7 Ultimate installed (which from what I understand is the only way to have Bitlocker).  I have windows 7 professional and I never encrypted my drives with bitlocker, 1 out of the 3 drives is partially
encrypted with TrueCrypt, the other 2 are not encrypted with anything.
The stranger thing is that I can plug the external drives to another laptop and I can access the data fine with no problem or errors.  I searched the forum for simliar problems, but did not see any responses with fixes to this issue.
The only thing I can think of is that my Desktop downloaded and installed a bunch of Windows Updates within the last 4-5 days.
heres is the update list
http://farm6.static.flickr.com/5304/5890096650_431b0f3627_b.jpg
Any assistance in attempting to figure this out would be appreciated.

Hi,
According to the error message, it should use
BitLocker Repair Tool to fix it, refer:
http://technet.microsoft.com/en-us/library/cc734057(WS.10).aspx
What error message did you receive when you use BitLocker repair Tool?
I notice one drive is encrypted with TrueCrypt, please use that program to unencrypt the drive for test.
If it doesn’t work, since the issue didn’t appear before, you can try to perform a system restore to see the result.
Hope that helps.
Regards,
Leo  
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Kereros error in event viewer logs.

    Hi All,
    We have configure Vintella SSO on XI3.1 previously and for some reasons now we have changed to NTLM SSO but still we are observing kerberos error in event viewer logs.
    Error1 : Kerberos error was received on log on session , client time and server time etc.
    Error 2: Kerberos client received KRB_AP_Error_Modified server host/fully qualified name .THis indicate that password encrypts the kerberos service ticket different than that on target server commonly this is due to identically named machine account in the target realm and the client releams.Please contact your adimistrator.
    Please help.
    THanks....

    That's a Microsoft Error coming from a Microsoft log, I can't be sure what's causing it, you need to consult Microsoft.
    Usually in their errors the service account that generated it (if by a service account) is one of the details or in the error message. You may need to stop running something with a service account...
    Regards,
    Tim

  • Windows is Scanning and repairing drive... (- Errors in Event Viewer)

    Long post, please be patient... :)
    I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
    Windows is Scanning and repairing drive...
    Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
    A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
    A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
    number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
    What has been done 1st trying to fix that:
    SSD disk has been changed (image from previous SSD copied back) ->
    no solution, error remains
    chkdsk /F /R -> no solution, error remains
    SFC /scannow -> no solution, error remains
    dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
    TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
    that DVD claiming "The media inserted is not valid"... ???
    Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
    Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
    mountvol returns:
    \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
    (This is my C:\ drive where Windows installation resides)
    \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
    *** NO MOUNT POINTS ***
    \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
    *** NO MOUNT POINTS ***
    \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
    *** NO MOUNT POINTS ***
    Then running fsutil dirty query on each returns:
    Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
    Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
    Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
    Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
    The chkdsk on the dirty volume
    \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
    The type of the file system is NTFS.
    Insufficient storage available to create either the shadow copy storage file or
    other shadow copy data.
    A snapshot error occured while scanning this drive. Run an offline scan and fix.
    Diskpart output on the same volume:
    DISKPART> lis par
    Partition ### Type Size Offset
    Partition 1 Reserved 128 MB 17 KB
    Partition 2 Recovery 1000 MB 129 MB
    Partition 3 System 260 MB 1129 MB
    Partition 4 Primary 146 GB 1389 MB
    Partition 5 Recovery 350 MB 147 GB
    Partition 6 Recovery 19 GB 148 GB
    Questions:
    1) Are my Partitions OK, haven't "touched" anything?
    2) Excluded the dirty volume from boot checking with chkntfs /x
    -> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
    What is causing the error?
    3) Why do I have three (3) recovery partitions?

    What has happened in the past days:
    A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
    B) I found
    instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
    C) Booted with USB and performed "Refresh your PC without affecting your files."
    D) Windows was refreshed but...
    -->>
    Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
    1) Related Error in Event viewer (NTFS):
    A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
    A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
    file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
    2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
    Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk.  Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
    PowerShell.
    -->>
    Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
    Summary:
    - Refreshing my T431s with OEM Image does not help
    - The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so...

  • Rapidboot Error in Event Viewer

    Folks - I am getting the following persistent error in Event Viewer on my brand new x220:
    Faulting application name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
    Faulting module name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
    Exception code: 0xc0000005
    Fault offset: 0x000000000000d248
    Faulting process id: 0x35c
    Faulting application start time: 0x01cc1678fdbedc11
    Faulting application path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
    Faulting module path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
    Report Id: 41b6ea8b-826c-11e0-af33-f0def15ccf15
    Would appreciate any thoughts.  Thanks.
    Solved!
    Go to Solution.

    I was able to resolve this issue and the PHCORE (Rapidboot driver) error no longer appears upon boot in Event Viewer.
    I noticed that when Rapidboot's executable file (HYPERW764) BSOD'ed, both Superfetch and VSS became disabled in the Services - a big no-no.   After re-enabling Superfetch and VSS, I was able to successfully uninstall and reinstall Rapidboot.
    I believe the root cause may have been one of my antivirus programs (MSE or Malwarebytes), and since uninstalling them and installing ESET, I have had no issues with Rapidboot.

  • Application error in Event viewer Event ID :6398 The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition

    Hi Friends,
    On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating.  Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
    the issue. 
    Please look at the error below and help me to fix this issue . 
    Thanks
    valmeekeshwar

    Try this
    https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
    Stacy www.sharepointpapa.com

  • UCCX 7.0 Errors on Event Viewer

    Hi Team.
    The customer was alerting us about errors that are showing in the Event Viewer UCCX 7.0 server (on Windows).
    The errors in Event Viewer are:
    Event Type: Error
    Event Source: CSAgent
    Event Category: Kernel Rule
    Event ID: 256
    Date:  3/13/2013
    Time:  1:22:12 PM
    User:  N/A
    Computer: UCCX02-SS-CRT1
    Description:
    The process 'C:\Program Files\Java\jre6\bin\jusched.exe' (as user UCCX02-SS-CRT1\Administrator) attempted to initiate a connection as a client on TCP port 80 to 137.254.16.112 using interface Wired\HP NC7782 Gigabit Server Adapter. The operation was denied.
    ===================================================================================
    Event Type: Warning
    Event Source: Storage Agents
    Event Category: Events
    Event ID: 1210
    Date:  3/13/2013
    Time:  1:17:32 PM
    User:  N/A
    Computer: UCCX02-SS-CRT1
    Description:
    Drive Array Tape Drive Cleaning Required.  The tape drive in Slot 0, SCSI bus 2, SCSI target 5 requires cleaning.
    [SNMP TRAP: 3044 in CPQIDA.MIB]
    ===================================================================================
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:20:58 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2005 Network communication error (TRANSIENT).
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:20:58 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:21:08 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2005 Network communication error (TRANSIENT).
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:21:08 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
    ===================================================================================
    These last four errors were shown and generated intermittent communication between the telephony server (CallManager) and the IPCC because all active calls were interrupted.
    I searched online documentation but can not get anything to tell me the meaning of these errors, their causes and some plan of action.
    I appreciate your support to understand why these errors and explain to the customer the cause of these.
    Thanks.
    Best Regards.
    Ernesto Gonzalez

    Hi,
    1. CSA denying the Java periodical update process from contacting its server. This can be safely ignored (Java is the platform of UCCX but is updated with a UCCX update, updating Java separately is not necessary, and in fact, not recommended. However, Java contains this periodic update check and - as far as I know - it cannot be turned off programmatically).
    2. Tape cleaning required - is there a tape drive attached to the server?
    3-7. Temporary network communication issue.
    G.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • What is this error in Event Viewer policy file "C:\Program Files (x86)\Citrix\ICA Client\Microsoft.VC80.MFCLOC.MANIFEST

    Hi,
    One of my users is using Citrix Receiver on windows 8.1
    Below is something I encountered while looking at her event viewer on her PC.
    Please advise if MFC80.DLL is corrupted or missing and how I can fix this.
    Activation context generation failed for "C:\Program Files (x86)\Citrix\ICA Client\MFC80.DLL".Error in manifest or policy file "C:\Program Files (x86)\Citrix\ICA
    Client\Microsoft.VC80.MFCLOC.MANIFEST" on line 5. Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
    Definition is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762". Please use sxstrace.exe for detailed diagnosis.
    Thank you.
    Regards,
    Joshua Tay

    Hello Joshua Tay,
    Please take a look at the following thread similar to this issue.
    http://discussions.citrix.com/topic/326071-receiver-34-windows-8-sidebyside-error-starts-loading-then-exits/
    Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    As this issue is relate to Citrix, to receive better support, it is recommended to ask in the related forum.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Hpqcxs0. What is it ? errors in event viewer

    I keep having errors in the event viewer that says hpqcxs0. A time out was reached (3000) milliseconds 
    while waiting for the hpqcxs08 service to connect. The other one is hpqcxs08 service failed to start due to th following error: service did not respond in a timely matter.  Several of both of these. Seems to be some kind of error with the hp printers?   I have an hp photosmart c4680, and a hp deskjet di560.  Any help would do.

    Hello Joshua Tay,
    Please take a look at the following thread similar to this issue.
    http://discussions.citrix.com/topic/326071-receiver-34-windows-8-sidebyside-error-starts-loading-then-exits/
    Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    As this issue is relate to Citrix, to receive better support, it is recommended to ask in the related forum.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

    Hi,
    We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
    http://support.microsoft.com/en-us/kb/2969673/en-us
    Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
    logged like  "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
    view.
    Please advice how to fix the issue.
    Thanks
    Prasanthi.

    Hello,
    seems to me that you maybe only updated the syncengine but not portal/webservice.
    I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • BI 4.1 Multiple Errors on Event Viewer

    Hi
    My client uses BI Platform 4.1 Support Pack 1 Patch 1. During the past 2 days, there have been several errors logged on the Event Viewer on the BO server. Now, the infoview platform is unresponsive and just hangs for all the users. On having a look at the Services in CMC, the WebI Processing Server status was "STARTING" though nobody had manually tried to stop/start it. So, when I checked the event viewer fr any further errors, there were several repetitive errors which were logged:
    1) Log Name:      Application
    Source:        Server Intelligence Agent
    Date:          22/07/2014 20:04:44
    Task Category: Error
    Level:         Error
    Description:
    Server Intelligence Agent: server BO.WebIntelligenceProcessingServer is being recycled.
    2) Log Name: Application
    Source: BusinessObjects_cms
    Date: 23/07/2014 06:29:57
    Task Category: Database
    Level:         Warning
    Description:
    Database access error. Reason [Microsoft][SQL Server Native Client 10.0][SQL Server]Transaction (Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.. (FWB 00090)
    (This warning is recorded multiple times)
    3) Log Name: Application
    Source: BusinessObjects_cms
    Date: 23/07/2014 09:47:38
    Task Category: OSCA_Services
    Level: Error
    Description:
    CMS Server Watcher: server named 'W2K8R2_BO.WebIntelligenceProcessingServer' is being marked as down because it is unresponsive
    (This error is recorded multiple times within 20 minutes). IT restarted the server and BO is now working fine.
    I could not locate any other errors which would give me some more insight to the root cause of these errors. Could someone share some useful posts/links about similar kinds of errors? I tried to search on the forum, and i see suggestions stating that it could be related to network or connectivity. I'm not quite sure though.
    Many Thanks
    DE

    Thanks Sebastian
    We had to restart the SIA and the deadlock issues stopped appearing. For a couple of hours everything was running fine, until we noticed the following errors.
    Log Name: Application
    Source: Application Error
    Date: 23/07/2014 13:04:16
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    Faulting application name: WIReportServer.exe, version: 14.1.1.1072, time stamp: 0x52310a77
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000374
    Fault offset: 0x00000000000c40f2
    Faulting process id: 0x1b68
    Faulting application start time: 0x01cfa65efeb52f5b
    Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d95bdba2-1269-11e4-x3x3ds-6c3be5befa0c
    Log Name: Application
    Source: Server Intelligence Agent
    Date: 23/07/2014 13:04:22
    Event ID:      4096
    Task Category: Error
    Level:         Error
    Keywords: Classic
    User:          N/A
    Description:
    [Node Name:BO]
    [User Name: BO$]
    Server Intelligence Agent: server BO.WebIntelligenceProcessingServer stopped unexpectedly.
    The WIPS restarted itself. Is there a definite root cause for this issue?
    Many thanks
    DE

  • Error in Event viewer - COM Server application security Issue

    Dear All,
    I am installing one software on windows cluster environment. But while installing I am getting continuous error in System in Event Viewer as 'The application-specific permission settings do not grant Local Activation permission for the COM Server application
    with CLSID {xxxxxxxxxxxxx} and APPID {xxxxxxxxxxxxx} to the user NT SERVICE\SQL Server Distributed Replay Client SID (S-1-5-80-3249811479-4343554-65656-65665) from address LocalHost (Using LRPC). The security permission can be modified using the Component
    Services administrative tool.'
    I have seen in component services, that app ID I am getting for DReplayController service. On security tab if I want to give permission to that particular user then to which user I want to add in 'Launch and Activate permissions'. I am not getting 'SQL Server
    Distributed Replay Controller' user in list.
    So, please help me.
    Thanks in advance.

    Hi,
    Please try to add this account: NT AUTHORITY\SYSTEM.
    More information for you:
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
    https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
    Event ID 10016 issue in SQL Cluster Server
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
    In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • TP Twist - Storage Errors in Event Viewer

    ------- UPDATE:  Found out the first error was most likely caused by a USB drive since there are only two drives in the system.  Still worried about the second error however..
    Hey guys,  
    I checked my event viewer today and noticed two different errors that have occured numerous times within the last few days in what appears to be at fairly random intervals.
    (1) - System Error: The Driver Detected a Controller Error on \Device\Harddisk2\DR2.
    (2) - A Timeout (3000 Milliseconds) Was Reached While Waiting For A Transaction Response From The ExpressCache Service.
    I am moving to reinstall the express cache software now and wait to see if the error presents itself again.  Anyone else seen this before?

    25/10/2008
    No answers - never mind, I've found the solution. The Nokia PC Studio requires specific files from the Visual Studio C++ 2005 library. It doesn't however ensure that they are installed, and in this case it results in the "side by side" errors shown in my previous post.
    It can be fixed by installing vcredist_x86.exe version 6.0.2900.2180 (Visual Studio 2005 library file). Having the later 2008 files installed doesn't overcome the problem.
    That's more than a little slack Nokia!

  • ERROR on Event Viewer

    Hi All
    I have installed and configured EPM-11.1.1.3 Hyperion Foundation, Essbase, Planning, Reporting & Analysis and ERP Integrator. The Configuration was successful without any error. Financial Management, Startegic Finance and Performance Scorecard are installed but not configured as it is not needed.
    Now my Event viewer giving me the below error.. what could be the cause..?
    ***** ERROR *****
    Invalid setting data was retrieved from Hyperion® Shared Services Registry, contact your Strategic Finance representative for assistance.
    Many Thanks

    Hi,
    I would like to install Hyperion Planning 11.1.1.3 in Windows server.
    I need some details wheather I can go for Windows 2003 or Windows 2008 ( 32 bit or 64 bit).
    Could you please proivde me some installation document & configuration doc for Hyperion Planning 11.1.1.3?
    Edited by: user9172122 on Mar 31, 2011 10:34 PM
    Edited by: user9172122 on Jun 22, 2011 2:59 AM

Maybe you are looking for

  • Domain Name

    Can I transfer my domain name with Muse or Business Catalyst?

  • Tracking Podcast Traffic on iTunes

    Is there a way get the traffic/views/hits to our iTunes Podcast site? Would be very helpful. I use Feedburner to post to iTunes. Any help would be appreciated.

  • CSS based layouts

    HTML DB's (even 2.0) layout features are based firmly on pure HTML tables. Rows and cells, rowspans/colspans. etc. Reading some of the bleeding edge web development sites/blogs out there, they have been proclaiming the death of HTML tables for page l

  • Start up Screen Appears on Desktop

    Hi, I'm wondering if anyone else is having this problem. The startup screen is appearing on the desktop and never goes away. The computer starts into Mac OS X and instead of seeing my desktop picture I get the "Starting Mac OS X". I've got a MacBook

  • Logic and file consolidation

    I am a Logic user since version 4.x. I am a recent newbie to ProTools, only out of necessity. ProTools has ONE command that I'd pay $100 for a Logic update just to get that command. Basically a one-click "consolidate session" command where every audi