Receiving but not sending routes to BGP established nei.

In my home lab, I am running BGP over OSPF and EIGRP. The peering is establsihed between the routers, but one of them is not forearding the routes it receives fromits neighbour.
Where to look for the problem.

Hi,
I presume you are talking about the fact that R6 is not sending any routes to R2. There is a good reason for this. If you look at the 'sh ip bgp' output for R6, you will see that all routes marked with a '>' sign were learned from R2. Therefore, these are selected as the best routes. There is not a single route that was not learned from R2. BGP will not advertise out routes that it learned from a neighbor back to that neighbor. Also, BGP will only adveritse the routes it itself uses (in this case, the ones marked with >). Since all of these routes were learned from R2, R6 has nothing to advertise to R2.
This is correct behaviour. If you really want to see something being advertised, do somethink like creating a loopback interface on R6 and then do 'redistribute connected' under your BGP process on R6.
Hope that helps - pls rate the post if it does.
Paresh

Similar Messages

Receive, But Not Send Mail

I recently purchased a new iMac and bought ProCare to bring all of my important documents from the old iMac to the new iMac. Since bringing home the new computer, I can only receive e-mail. Here are a few of the specifics:
We use comcast and have a wireless router in the house. I have tried connecting directly to the modem and wirelessly. I have tried using no authentication and authentication. I have tried using SSL. I have made sure the ports are correct for each of these settings. I have deleted the outgoing servers and reentered them. I have added a new account. That cannot send mail either. I also have an 14" iBook. I can send and receive mail from all accounts on that computer. To add to the confusion, I configured Entourage to send and receive e-mail today and it works with out any problems.
I am worried a corrupted e-mail came from the old computer?!? Is that possible? I think I have narrowed it down to the Mail application itself. Is there a pref file I should trash? I am confused as to why I can receive but not send? Another detail. When I hit send, it simply puts the file in the drafts folder. It is not as though the server is busy and puts the file in the Outbox.
Any help would be great. It is hard to get to the store for the genius to trouble shoot the issue.
Thanks in advance,
Debbie

When I hit send, it simply puts the file in the drafts folder.
What do you mean? The message is already in Drafts when you compose it, isn’t it? Does clicking the Send button actually do anything? Is it enabled at all or is it grayed out? Can you type the content of the message normally?
Proceed as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues.

Trying to set up mail.. will receive but not send

Trying to set up mail.... will receive but not send. Already called internet provider. They said ask Apple.

Hi ...
Mac Pro, Mac OS X (10.7.2), Lion.
From the Lion Help viewer ...
If you can’t send messages
If the Send button is dimmed or you see an alert that your message can’t be sent using the outgoing mail server, you might not be able to send messages. Here are some things you can try:
Make sure the outgoing mail server is specified correctly, as directed by your email service provider.Verify your outgoing mail server
If you try to send a message and a dialog appears saying you need permission, an administrator has limited the email addresses you can correspond with. Click the Ask Permission button.Request permission to send messages
Choose Window > Connection Doctor, and follow any instructions displayed in the Details column. Check whether there is a problem with your outgoing mail server or a firewall, if applicable, or if there was a login failure. If the Connection Doctor indicates a firewall problem:Verify there is no firewall software blocking email traffic on port 25, 465, or 587.Check whether you’re affected by another firewall. This could be either software installed separately from Mac OS X or built into an Internet sharing router, or software administered by your Internet service provider. Contact the appropriate person to find out whether a firewall exists.
You may be able to send messages from only a certain location. For example, if you send messages from school, you may not be allowed to send messages using the school’s outgoing mail server when you’re at home. Or, the email service provider may allow you to send messages but with stricter settings (such as requiring a name and password). Get the information you need from your provider and then change the outgoing mail server settings in Mail preferences.

TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

I think a firewall is interfering with my mail program - I can receive but not send. Please help!

I think Firefox may have installed a firewall that is interfering with my email program - I can receive but not send mail.
== This happened ==
Not sure how often
== Firefox updated with ALOT

Firefox does not install a firewall.

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.

Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you.

Why can I receive but not send emails

Why can I receive but not send emails on my i pad?

Perhaps the outgoing mail server settings are incorrect or incomplete.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Why can I receive but not send mail?

Why can I receive but not send mail?

With sparse information you give I would venture that you have not set up the correct Outgoing Mail Server settings in Mail>Preferences>Accounts. Contact your ISP for their set up.

I can receive but not send emails with my skynet account - what am I doing wrong ?

I can receive but not send emails with my skynet account - what am I doing wrong ?
I have no problems with my Yahoo account but I can not send emails with my skynet account.
Actually in iPhone :
Outgoing Mail Server > SMTP "relay.skynet.be"
Primary server > Not Configured > Off
Thank you ...

When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Mail, receiving but not sending

Mail is playing up after I installed a new Snow Leopard system. I can receive but not send. As far as I can tell I have all the right settings. My (don't tell anyone) PC laptop works perfectly.Can anyone tell me where I should be looking?

Open Mail and look in Mail menu item "Window". In the drop-down select "Connection Doctor" and before checking in Connection Doctor look at the bottom of it's pane and show the read out print, then click on check server connection. This way you can see what the server is telling your Mac. Maybe you didn't set up the SMTP server settings correctly.

My o2 email will receive, but not send on my ipad

My o2 email will receive, but not send. I've got other email accounts on the ipad & they all work OK. The o2 mail account used to work properly, but I needed to remove the account & since I've put it back on, it won't work on my ipad. Works ok on android mobile phone. I've checked the settings & spoken to o2, but they couldn't solve! It may be since I've joined the cloud? Any advice, gratefully received. Thanks.

Recheck the settings once again. There is something wrong. And it seems to happen to O2 people with some regularity. Google o2 mail settings and you will get a page with the details. Pay close attention to the port setting, you may need to change it on the pad, and that may be the problem.

5th gen ipod can receive but not send emails

5th gen ipod can receive but not send emails. I have iPad with same settings and no issues. Yet, I keep getting "cannot send mail" the user name or password for "[email protected]" is incorrect. Please assist. I am not running both accounts simultaneously

See:
iOS: Unable to send or receive email
Did it work before?
I suspect a error in the settings for the outgoing mail server.

HT4759 account - can someone please tell me the settings to use (port number, encryption etc) as I can receive but not send. Thanks!

I'm trying to use Outlook to receive and send email from my mail.me.com account - can someone please tell me the settings to use (port number, encryption etc) as I can receive but not send. Thanks!

Looks like there is a general problem with SMTP mail today. Lots of people posting similar things.

Mail will receive but not send!!!!!!

Hi, my imail is receiving but not sending. I have 3 other computers in the office with different email address using imail and they are working fine? I deleted the account then added it and still cant send mail. its not a server issue because all other email address for our office email work just not mine.
any help will do.

Try 'synchronize' under mailbox menu. Have had the same problem sporadically for no apparent reason. Have 3 email accounts set up and sometimes just one of them does this- different one every time. I call the ISP and it is not a problem on their end- and I know that is true because I can logon to the web-based version and see the emails that I am not getting in Apple Mail. Synchronize sometimes has fixed this problem for me.

Receiving but not sending routes to BGP established nei.

Similar Messages

Maybe you are looking for