Receiving Cannot get mail message when attempting to access Yahoo mail

I'm receiving this message using my Iphone 4s and I've seen some posts that suggest deleting the account and then re-adding it.  I've tried this a few times with no luck.  I also changed my password, but that didn't work either.  I'm not sure what to try next.  I am able to access my work e-mail (using Outlook) through my phone so I'm not sure why the phone can access Outlook, but not Yahoo.  Any suggestions?

Thanks Matt
After persisting for about 24 hours, this problem has disappeared. I did in fact walk away and do something else for a few hours although the computer was left asleep not off. A day later all remains OK so I'm really no wiser as to just what or where the problem was. Regardless much thanks for your assistance.

Similar Messages

  • Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    I have Yahoo mail (POP) account.  Mine is working fine at present.  I do occasionally get asked for password while sending mail.  I have had your issue in the past and it usually clears up in a few hours.  Sometimes I sign out and then back in and it starts working again.

  • Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

    In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

    Hello there,
    Thanks for using Apple Support Communities.
    Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
    Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
    Cheers,
    Alex H.

  • I get this message when trying to access Yahoo rror code: ssl_error_handshake_unexpected_alert

    Yahoo is my main e mail addy and I can't get in. I get this message rror code: ssl_error_handshake_unexpected_alert Also, I upda\ted my VLC player but Firefox doesn't show it.

    See:
    *http://en.kioskea.net/faq/15289-google-nginx-404-error

  • HT1390 trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any

    trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any help much appreciated

    You might want to try it again.  It started working for me about 10 minutes ago (~8pm CST).
    This was happening for rentals and purchases.

  • TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes:  "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

    have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes:  "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I am receiving the following error message when attempting to text to a valid mobile/cell number in Peru.

    I am receiving the following error message when attempting to text to a valid Mobile/Cell number in Peru...Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
    I am able to receive texts from the number in question, but not able to text back to the person sending.
    The number is a valid 9 digit cell/mobile number.

    If you're sending as SMS (green bubble) then this is a carrier issue and not an issues with your phone.
    To text internationally, you nearly always need to include the country code before the rest of the phone number. If you are doing so and still have issues, contact your carrier.
    ~Lyssa

  • Keep getting error message when attempting to buy a song (Error 5002)

    This error message seems to pop up with just this one song (says there is an issue with the iTunes store and that it is an unknown error) and it has not changed this status for a month now. I have the latest iTunes and there were no problems in updating/getting other songs from the store.
    So what's up?
    Thanks,
    MH

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • Getting error message when attempting to download the beatles box set itunes lp

    I am getting an error message when downloading the beatles box set/iTunes lp.  States the file isn't there.  please advise.    

    Hi,
       First of all, you have to identify the scheduler server in case you have a multiserver installation.(Server Managr->Options->Server options). Then you have to follow the steps:
    1. Go on Scheduler server, open Control Panel->Scheduled Tasks and delete all the jobs starting with DM_<appset>*
    2. Run the query into the appset sql db:
        delete from tblSchedule
    You can run the steps by application as well(if you have problem only for a specific application):
    1. delete all jobs starting with DM_<appset>_<application>*
    2. delete from tblSchedule where App='<application>'
    Best regards,
    Mihaela

  • Receiving User License Agreement Message When Attempting To Open PDF - 10.1.0

    Recently upgraded to Reader 10.1.0. When attempting to open a specific PDF document I receive the following dialog.
    This only occurs with one specific PDF, as I have opened other PDF's with the IE browser plugin, as well as PDF's saved to my local machine using Adobe Reader.  I can open the PDF if the document is saved first, and then opened through Reader by performing a File -> Open.
    Any ideas on how to correct the issue?  The application was deployed using enterprise deployment tools along with the Reader customization kit.  I did check the checkbox for Accept User License Agreement in the Customization wizard.

    I also was pushing the
    HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Acrobat Reader\10.0\Privileged
    THat didn't seem to have any effect.
    I think the other key you had might be the one causing your password protected issue. It is the only difference between mine and your setups from these posts.
    So it comes down
    1: useing the adobe website to upgrade to 10.1.0 breaks the reader integration in different ways.
    2: installing full version from ftp site fixes the issue except for password protected pdf if you have the
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\10.0\FeatureLockDown set to 0
    changing back to 1 repairs this issue.
    Hmmmm maybe 10.2

  • Get error message when attempting Photoshop CC Update

    I am trying to update Photoshop CC get error message
    Photoshop Camera Raw 9.0(CC)
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
    Can anyone help.
    Michael

    See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

  • I get error message when attempting to update apps on my ipad 1

    "Unknown error has occured" appears when attempting app update

    Try this.
    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again.
    If you are not using iOS 6 go to Settings>Store>Apple ID.

  • Getting Error Message When Trying to Access iTunes Music

    Hi!
    Need some help.
    Little Mac Mini has been through a lot after foobaring after the last update. To bring you up to speed, I had to get Apple Genius Bar to fix the problem but they re-installed the OS by installing 10.4.7, Safari 2.0.4 and iTunes 7.0.x even though it had had 10.4.11, Safari 3.0.4 and iTunes 7.5 on it before the problem. Even when it was offline with Safari and mail crashing, iTunes worked fine. After Apple's re-installing 10.4.7, iTunes had problems and gave me a message that it could not play the video files because the quicktime version was too old. So Quicktime too was re-installed using an older version. Why did Apple Genius Bar fellow do this?
    Anyway... after this I found an underlying problem with the directory and had to restart with Tiger install disc and run Repair Disk to fix it. Then I got the computer back up to 10.4.11, Safari 3.0.4 and iTunes 7.5 using Apple's combo update and Software update. Repaired permissions and verified disk, everything.
    So here is the problem, I can not get iTunes to access my music on the external hard drive anymore. I remember getting a message that suggested that something happened to the xml file.
    Here's the thing: I have two complete copies of the iTunes music on two external hard drives. I also have, in addition to these, a complete copy of the iTunes Music backed up using the Apple program "Back-Up." Usually, I keep iTunes pointing to the music folder on one of the external hard drives, but now, it insists on opening up the iTunes music on the internal which has very little music on it. I know how to open the other music libraries by holding down the option key and starting iTunes and choosing a library. In the past when I did this I got iTunes up with all of my music, etc. fine. I used to be able to access the music library on one external and then switch to the other library by holding the down the option key while starting iTunes. But now, I get a message that says "An iTunes Library file could not be found in the folder 'iTunes Music.' Please change to another" irregardless of which library I choose. What does this message mean? How do I get iTunes to access the music in these libraries again?
    I know that the music libraries are all fine on the externals, because I have gone and found them. All is okay with that, but I can't get iTunes to see them. Could this be because the xml file is missing? I can't seem to find it anywhere. Not in the main hard drive or on any of the externals. If it is missing and I need it, where can I get it and where, exactly do I put it. I am a bit sketchy on my understanding of the file hierarchy as you can tell.
    I do have back-up. Would a restore fix the problem. My little mac only has about 6 gigs left in it's internal so there is not enough room to put the music back into the internal iTunes that it is currently working from. Can I restore the back up version on to one of the externals? I don't know really what to do.
    What am I missing? Thank you so much!- Charlotte

    Well... no response.?
    Anyway.... solved my own problem. Apple should hire me.
    Actually read another post and got an idea. Held down the option key while starting iTunes. Got the window that asks if I want to create a new library or to choose a library. I had been choosing and finding that my libraries on the two external hard drives were damaged. Yes... I think it was because the iTunes Library files and the iTunes Library xml files were missing. So instead of choosing library, I chose to create a new library. Of course it brought up iTunes with nothing in it. I opened the folder "iTunes" on that same external hard drive and boldly clicked and dragged it on to the empty Music section of iTunes. It imported! First importing everything. Music, podcasts, video, audio books, etc. and then imported album art and then boom, it was all there. With trepidation, I closed iTunes and reopened it and yes, all is there still... like in.... it works! It plays! I've been listening to music while typing this.
    Of course, the playlists and play counts, ratings are gone. Yes... I expected that, but I have all of the media and that is what is important. Even the things I downloaded just before the problem happened is in there. Okay... well that's good.
    Hey.... what ever you do, keep back ups and copies, like several and in several formats and all over the place. For instance, most of my music is backed-up in five places. On a cd, also on a dvd, and also in three places on two different external hard drives!
    Okay.. for the weird thing and it's only weird to me because I obviously do not completely understand the file system in the mac. It's this: Before I created this new library, when I went to the external hard drive I found the folder labeled "iTunes" and no other folders. The iTunes folder only contained the media content and I could not find the library or library xml files. Now after importing that one iTunes folder into the newly created library and allowing it to get everything into it, going to the external hard drive I had expected to see a new folder with a new copy of all of the music content in it but instead I found a new folder labeled " iTunes1" and opening it, I found the library and library xml files. Ah.... so if I am understanding this correctly, what "creating a new library" did was to add in new the library and library xml files that were missing, but it still accessed the "iTunes" folder with all of the content that was already there. So... in essence fixing the problem. Yes... this would be correct because the external has the same amount of gigs used as it had before I created the new library. This is way cool! And no, I did not mess anything up, my computer's internal hasn't enough space for the iTunes music content and it's showing the same amount of space used so it's not like it moved the stuff into the internal. It couldn't do that, anyway.
    I shall thank the guys on the other post for their help. Hope this helps others.
    By the way... this whole problem happened originally because apparently my hard disk had errors in the directory and the downloading of the last security update (security update 2007-009) was just too much for it.
    Look before updating always check by going to Utilities and performing a "permissions repair" and also running "Verify disk," even if you see that your S.M.A.R.T. disk shows "verified." If verify disk shows any errors or problems then perform a disk repair. Do this before any update or installation or you may run into serious trouble. To do this get out your OS install disk. Use the Tiger one if your computer is currently running Tiger. Leopard one if it's using Leopard. Put the disk in and re-start your computer. As soon as it is off and before it even begins to start up, hold down the C key on the keyboard and keep holding it down until you get the message asking what language you want. Don't panic, this is correct. It will look like it wants to install the OS again. Don't re-install the OS. But you can choose the language. Here I was panicking and I don't want you to. At the top you will see the installer bar. Go to Disk Utility up on that bar and click on that, it will take you to Disk Utility and you will then and only then be able to perform a disk repair by clicking on "Repair Disk." Do it! Do it a couple of times until the thing reports that the disk has no problems. I forgot how it states this but I do remember that the lettering is in green. Green is great! Close Disk Utility. Quit Installer. A window will come up asking you to choose where to restart from so choose your internal hard drive and it should restart and be good to go.
    Trust me, the updates are fine. 10.4.11, Safari 3.0.4 and iTunes 7.5 are good, it's existing problems in your computer's directory or keychains that is causing the problems when updating or installing new stuff. I had to learn all of this the hard way, even though I tried to keep my mac clean and in top shape, and even though I asked and asked the Genius Bar guys at the local Apple store if there is anything more I needed to know to prevent difficulties. I learned all this here, in these discussions, in answer to my posts under other sections. Thanks Klaus1, Hawaiian_Starman, dechamp, and baltwo!
    Okay.. if I got anything wrong in my descriptions, please, please correct me! I don't want to be inaccurate. I want to know this stuff!
    Thank you so much for persevering through my long post, here. -Charlotte

  • Getting error message when trying to access video on my iPad

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

  • Getting this message when trying to access our cameras, how to fix? This address is restricted This address uses a network port which is normally...

    Just installed Firefox for my boss, and ran into something I've not seen before. When trying to access our private camera system, that uses specific ports, I got this message: "This address is restricted - This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection."
    Cannot find a setting in Firefox to correct this problem. Please help.

    Hello,
    Can you please check if either of these links help in the resolution of the issue
    # [http://kb.mozillazine.org/Network.security.ports.banned.override Firefox ports override]
    #[http://blog.christoffer.me/post/2012-02-20-how-to-remove-firefoxs-this-address-is-restricted/ Remove Firefox this address is restricted error]
    Thank you

Maybe you are looking for

  • How do I save a document created in pages in iphoto?

    How do I save a document created in pages in iphoto?

  • How to create a database trigger for automatic run statspack.snap

    Hi, I want to create a database trigger to run statspack.snap at startup. connect /as sysdba grant create any trigger to perfstat; connect perfstat/perfstat create or replace trigger auto_snap after startup on database begin statspack.snap; end; afte

  • Idoc programming question

    Hi friends, I am asked to write a custom executable program (not a function module) to create outbound idocs with some data from the database tables as for the selection screen data the user entered. How do I do this and how to trigger these outbound

  • AI acquire waveform. maximum readable data

    Hello, For acquiring data from an DC-accelerometer I'm using the 'AI acquire waveform.VI' to perform this task. I'm scanning for 10 seconds at a sampling rate of 10.000 S/s. When I'm looking at the amplitude spectrum I find spectral components below

  • Putting an increasing number in a document

    Hello everyone, I did a document in ID which needs a different number on each copy of it. Something like series on tickets, or alike. I really do not know where should I start with this :-)) Should I create the pages?? This is what I got from Type>te