Receiving error message "Sim Failure" on iPhone 4S now no service. any advice?

receiving error message "Sim Failure" on new iPhone 4S now no service. any advice?

hi guys,
i recently bought a new iphone 4s factory unlocked. in order to avoid sim failures and invalid sim errors or No service errors, Each phone has to be unlocked by connecting it to the Itunes.
Kindly follow the below steps to avoid any SIM card conflicts
iPhone FULL Unlock - How it Works:
-Connect your iphone to itunes without any network sim inside and when connected click on the iphones name.
- Click Restore install latest version of iTunes on your Pc or Mac or click check for updates
- Let itunes Backup your phone and then Flash to the Latest Version.
- Now disconnect phone and reconnect after 10 seconds.
- Now Enter another network simcard that's not the same network its locked on to
- Connect phone to iTunes with not accepted (not valid) simcard
- Wait until iTunes detects the phone
- iTunes will display (Congratulations, Your iPhone is now unlocked)
- Phone Unlocked
- just follow the instructions about activating the Iphone.
and iphone is unlocked
NOTE : This is the only FULL LIFE TIME UNLOCK solution for Apple iPhone as the IMEI is registered as UNLOCKED in Apple database.
This solution should be used ONLY THOSE WHO BOUGHT FACTORY UNLOCKED iPHONE 4S.
Your phone will always be unlocked even after each new update of your phone firmware !
All reasons given like bad IMEI series, manufacturing defects etc blah blah are not logical as everything was tested before every sale.

Similar Messages

I updated my iPhone to ios5. Receive error message " could no activate iPhone" iTunes message says there is no SIMM in phone. The SIMM I have used all along has not been removed.

Subject:
I updated my iPhone to ios5. Receive error message " could no activate iPhone" iTunes message says there is no SIMM in phone. The SIMM I have used all along has not been removed.

I know I answered you before on this but can't find the thread. Guess you didn't like my answer. Your phone was illegally hacked to unlock it and when you updated the phone it relocked it back to the original carrier. This made the sim you had in the phone useless and therefore it cannot activate the phone. Nothing can be done in these forums to help you fix your problem as it is against the TOS to discuss illegal unlocking or jailbreaking the phone.

HT1665 I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

See this support article: http://support.apple.com/kb/TS3221

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem?

I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.

Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424

Recently I started receiving error messages when I try to sync either my iphone or ipad...Help! ( The Ipad is a new purchase)

Recently I started receiving error messages when I try to sync either my iphone or ipad...Help! ( The Ipad is a new purchase and software is up to date.)

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503http://support.apple.com/kb/ts1503
 Cheers, Tom

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

Why am I now receiving error messages when I am trying to send texts?

Why am I now receiving error messages when I am trying to send texts? People that I have texted before I am now getting error messages and I have to click on the excalmation point and hit send as a SMS text. What's up?

Hi dwalker130,
If you are having issues with iMessages being sent to your friends, then take a look at the article below. It will walk you through checking your settings and even resetting your network settings on your iPhone. Let me know if this helps or need more assistance. It is a big article, so make sure to go over all the troubleshooting that is relevant to you.
iOS: Troubleshooting Messages
http://support.apple.com/en-us/TS2755
Regards,
-Norm G.

I receive error message "0xE8000084" when trying to sync my new 5g iPod Touch.

I receive error message "0xE8000084" when trying to sync my new 5g iPod Touch. How can I fix this? Please, does anyone know?

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

Anyone can help to advice how to solve this issue ?

Tried to open lr 5 in cc. Receive error message "LR encountered an error when reading from its preview cache and needs to quit". How do I fix the problem?

Tried to open LR 5 in cc. Receive error message "LR 5 encountered an error when reading from its preview cache and needs to quit". How do I fix the problem?

Hi, Have a look under the "MORE LIKE THIS" on the right there should be an answer in one of those threads.

Can't access my email. Receiving error message that my account has been suspended and that I need to contact customer service. How do I get a phone number?

The details are in the question. Receiving error message that my account has been suspended. Looking for a phone number to call and speak to someone. Or, please have someone call me at '''*removed*'''.
'''Phone number removed by moderator to protect privacy'''

Note that mozilla does not have a phone number and would never charge for services, if there is a page that says so, its a lie.

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

My nano will no longer sync to itunes. I tried to restore nano and received error message 1437 that nano could not be restored.

My nano will no longer sync to itunes. I tried to restore it and error message 1437 said it could not be restored. Any thoughts on how I can sync or restore?

Good day billoelwein,
If you are having an issue with your iPod nano being unable to restore, you may want to first try resetting the iPod. See the directions in this article -
Reset your iPod - Apple Support
If the issue is still present after a reset, you may need to restore your iPod nano back to factory settings. See this article -
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Safe computing,
Brett L

Receiving error message "Sim Failure" on iPhone 4S now no service. any advice?

Similar Messages

Maybe you are looking for