Receiving error message when printing on a Mac from Reader 10.0.2
I have tried printing several pdf files and received this error message: "Error: pstopdffilter/pstocupsraster failed with err number 13" from an HP Officejet Pro 8500. The problem started yesterday under Reader version 9.4.2, to which I upgraded a few days ago; I further upgraded today to version 10.0.2 to see if that would help. The printer is fine and the documents all print OK when using Apple Preview and Safari. There are no print restrictions on the documents. Any ideas?
Thanks for the reply, but there was no effect from "Reset printing system..." in System Preferences->Print & Fax. In addition, I uninstalled and reinstalled the printer software from disc - also, no effect. I've narrowed the problem down a bit by sucessfully printing to the same printer from Reader installed on another computer on my wireless network, so it does appear not to be a Reader issue. Off now to the HP website, and sorry if I created any unintended distraction to Adobe Forum members.
Similar Messages
-
Recently I started receiving error messages when I try to sync either my iphone or ipad...Help! ( The Ipad is a new purchase and software is up to date.)
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503http://support.apple.com/kb/ts1503
Cheers, Tom -
Receiving Error Message when running sh rep_populate.sh
Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your helpWe purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it. -
Error message when printing Sales Order
Hi,
I get following error message when printing out a sales order just created.
No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
What could be the problem?
Thanks,
Ajay AudichHave you tried with system PLD?
Thanks,
Gordon -
From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?
Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.
-
I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?
I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum] -
I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.
Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424 -
I'm repeated receiving error messages when I download adobe acrobat ,
i'm repeated receiving error messages when I download adobe acrobat , how do I get it to work?
Hi haftorahman,
Please try downloading from this page: Download Acrobat products | Standard, Pro | XI, X
Before you download, log in to your system as an admin, and disable any antivirus software.
Please let us know how it goes.
Best,
Sara -
Why am I now receiving error messages when I am trying to send texts?
Why am I now receiving error messages when I am trying to send texts? People that I have texted before I am now getting error messages and I have to click on the excalmation point and hit send as a SMS text. What's up?
Hi dwalker130,
If you are having issues with iMessages being sent to your friends, then take a look at the article below. It will walk you through checking your settings and even resetting your network settings on your iPhone. Let me know if this helps or need more assistance. It is a big article, so make sure to go over all the troubleshooting that is relevant to you.
iOS: Troubleshooting Messages
http://support.apple.com/en-us/TS2755
Regards,
-Norm G. -
I receive error message when exporting or converting pdf to word
i receive error message when exporting or converting pdf to word
Me too and I cannot find online support of any kind. It was hard enough to get to find this forum. Is there a tech support chat or phone number anyone can provide? Thanks!
-
Get error message when trying to launch bridge from CC 64 bit.
Get error message when trying to launch Bridge from Photoshop CC 64 bit. "Cannot complete command because extension cannot be loaded." Need fix. Thanks.
Hi Adobe Bubba,
Please uninstall the software, run the cleaner tool, restart your machine and install again.
Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
Regards,
Romt Sinha -
A get an internal error message when i try to install adobe reader
I get an internal error message when I try to install Adobe reader. I also get error message 1606 could not access net location %APPDATA%\. How can I fix this?
See this article http://support.microsoft.com/kb/886549/ regarding the corrupted %APPDATA% environment variable.
If you require further help, please specify your Windows version. -
i get an error message when trying to download apps from the app store. "Safari can not oprn the page because the address is invalid"
You can't use Safari to download iPad apps. Only use iTunes/App Store.
Cheers, Tom -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre
Maybe you are looking for
-
I had made a copy of the main revel file on my mac, and then i put it in my google drive folder for safety. I accidentally deleted one of the two libraries form my iPhone. I opened it up and panicked and thankfully I guess I had a backup of the other
-
My production artist brought this to my attention: He is unable to add metadata to PSB file formats through Bridge (we are currently using CS4). Has anyone else experience this issue? Is XMP for this format not supported in CS4? Any ideas on how to w
-
When is Adobe going to release a Chromebook compatible version of Creative Cloud?
Chromebooks are the wave of the future. When is Adobe going to catch up to the rest of the world and release a Chromebook version of Creative Cloud?
-
I've accedently deleted music from my library, is there a way to revert this?
I was managing a playlist on my itunes. I wanted to keep the same list but remove existing songs. I selected the songs and hit the delete button. I thought it asked me if i wanted to keep the music on my itunes, i thought i selected yes. But apprentl
-
Why do text messages from one att phone come in garbled like %^&KYY
my girlfriend has a blackberry storm 9550. all works well with only one exception. when her sister, who has an ATT phone, sends her text messages they appear to be all scrambled. no other messages from anybody else ever comes in like that....any idea