Receiving errors (RUN BL on) (PASS BL blink) (FAIL BL off)

I am receiving the errors (RUN BL on) (PASS BL blink) (FAIL BL off) om IPOD screen, It will not reset, I plugged into Itunes and Itunes/compiter will not recognize my IPOD either. Any suggestions as to why I am getting this error all of a sudden. The IPOD had been working fine without any problems before this.
Thank You

I just came upon a few queries in 2006 and 2007 who had similar problems. Then I found one GUY who found a solution which read, as follows: "Have both of you used the reset process with the HOLD button and then press MENU and Select at the same time?"
I tried the same and had to hold on to two buttons (at random, since I was not aware as to which button was the HOLD button (but I knew which was the MENU button), and suddenly my Ipod became normal. And as soon as I connected it to my laptop, things became exactly as what it should be.
Thanks a lot guys....... My Ipod is probably Ipod Classic 5 version. Anyways the point is clear...... TO RESET TO FACTORY SETTINGS ONE HAS TO PRESS THE HOLD & MENU BUTTON FOR 10 SECONDS CONTINUOUSLY, AND THE PROBLEM IS SOLVED.
BRAVO

Similar Messages

OEM ERROR: Run backup job from Enterprise Maneger failed

After configuring backup policy on my database by means of OEM console (Oracle 9.2, OEM 9.2.0.1) scheduled job failed. Job Output show:
"Could Not Find C:\WINNT\TEMP\3212132705.44]" (square bracket at the end of filename). This file (without bracket) exist and contain rman's script.
But how can I force OEM (or RMAN or other product) remove last square bracket!

I had the same problem of not discovering nodes and teh problem escalated to a point that jobs remained in "submitting" or "deleting" status. I couldn't delete nodes becuase jobs were dependent on it, and couldn't delete jobs because the node was manually configures.
The following steps are by trial and error and got me back to a working status where nodes are discovered. Try them at your own risk :)
Oracle Agent doens't seem to like changing IPs... if your machine IP has changed do the following:
1. Stop the Agent service (under control panel)
2. under Oracle's folder, ora92/network/agent, backup all the .q and .ora files and delete them. If it does not allow you to delete, disable the Agent service, reboot the computer and try to delete them
3. Start the agent service (if you had disabled it, change the startup back to "automatic"
4. I dropped the OEM repository and recreated it. Not sure if it helped or not, you can do the same or just go ahead and start OMS.
Hope it helps, again, no garantee this works. It did work on my computer.

RW-50004: Error code received when running external process.

Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1

Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald

Receiving error in AD replication but somehow passed test Replications ?

Hi,
Can anyone here please asssist me with how and where to troubleshoot the following error that I received when running DCDIAG from
HQPRODDC01-VM which is the newly elected DC in my head quarter office ?
Starting test: Replications
REPLICATION-RECEIVED LATENCY WARNING
HQPRODDC01-VM: Current time is 2015-03-04 08:39:09.
DC=ForestDnsZones,DC=domain,DC=com,
Last replication received from OFFICESITE2DC01-VM at 2014-08-07 10:47:09
WARNING: This latency is over the Tombstone Lifetime of 60 days!
DC=DomainDnsZones,DC=domain,DC=com,
Last replication received from OFFICESITE2DC01-VM at 2014-08-07 11:02:42
WARNING: This latency is over the Tombstone Lifetime of 60 days!
CN=Schema,CN=Configuration,DC=domain,DC=com,
Last replication received from OFFICESITE2DC01-VM at 2014-08-07 10:47:09
WARNING: This latency is over the Tombstone Lifetime of 60 days!
CN=Configuration,DC=domain,DC=com,
Last replication received from OFFICESITE2DC01-VM at 2014-08-07 10:47:09
WARNING: This latency is over the Tombstone Lifetime of 60 days!
DC=domain,DC=com,
Last replication received from OFFICESITE2DC01-VM at 2014-08-07 11:04:02
WARNING: This latency is over the Tombstone Lifetime of 60 days!
......................... HQPRODDC01-VM passed test Replications
The above same error I also receive exactly the same when running the same DCDIAG /V /C /D, somehow the Site Office 2 Domain Controller
OFFICESITE2DC01-VM is stated having issue but it works well with no complaints from the user.
Thanks
/* Server Support Specialist */

The DC have not replicated since a long time and got tombstoned - Your end users might not be impacted but you do have a problem here.
On the faulty DC, you can proceed as the following:
Run dcpromo /forceremal on the faulty DC
Seize the FSMO roles that the DC was holding to another DC (To check if the DC has FSMO roles, you can run
netdom query fsmo command): http://support.microsoft.com/kb/255504
Do a metadata cleanup: https://technet.microsoft.com/en-us/library/cc816907%28v=ws.10%29.aspx
Promote the server again
It is better to do that out of business hours to avoid impacts on your end users.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile
Ahmed,
When I ran the DCDIAG /V /C /D command in the
OFFICESITE2DC01-VM I got the following error:
Warning:
Missing SRV record at DNS server 192.168.2.2:
_kerberos._udp.domain.com
Warning:
Missing SRV record at DNS server 192.168.2.2:
_kpasswd._tcp.domain.com
Error:
Missing SRV record at DNS server 192.168.2.2:
_gc._tcp.SITEOFFICE2._sites.domain.com
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
FYI:
OFFICESITE2DC01-VM is running as DC, GC and also as DNS server for SITEOFFICE2 AD Site
192.168.222.10 is the IP address of OFFICESITE2DC01-VM server in SITEOFFICE2 AD Site and also acting as the primary DNS server of
OFFICESITE2DC01-VM NIC
192.168.2.2 is the IP address of 2nd DNS server in My Data Center AD Site and also the secondary DNS server of
OFFICESITE2DC01-VM NIC
So can I add the record manually ?
/* Server Support Specialist */

I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help

TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.

Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock

I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?

I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?

Perhaps this can be of help:
http://support.apple.com/kb/TS3704
It fixed the problem for this DukeHutchens in this thread:
https://discussions.apple.com/thread/3916663?start=0&tstart=0

Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

Hi Doug Talbott,
Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
Regards,
Rahul Tyagi

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Receiving a run time error BCD_OVERFLOW

Hello,
While executing the Zprogram ...I am receiving a run time error.
Got Runtime Error BCD_OVERFLOW
When I analysed the issue in ST22....Type P
Result is larger than one which is defined...
Any suggestion would be appreciated ...
Regards,
Kittu

Hi,
You may need to define the result field to be larger, if it is still
possible to do so.
Or
there is another way you can handle this error...
You can give a try using this sample code:
Data : l_number_str type string.
Catch system-exceptions convt_no_number    = 1
                       convt_overflow     = 2
                       bcd_field_overflow = 3
                       bcd_overflow       = 4.
l_number = l_number_str.
endcatch
Regards
Lekha

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
Can someone tell me how to correct this problem?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Receiving error code 0x8002006E on new iMac running 10.7.2

Receiving error code 0x8002006E on new iMac running 10.7.2. Have seen threads form 2008 on laptops with error but with no solutions. Any suggestions?

Thanks for the suggestion. The AppleCare technician had me try an SMC Reset and it corrected the problem. There is information in this inthe article below.
http://support.apple.com/kb/HT3964?viewlocale=en_US

Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
Other downloads

ERROR - CX_FQDN error received in running first Dynpro

ERROR - CX_FQDN error received in running first Dynpro
Hi,
I am encountering the above run time error when attempting to run a dynpro application in my SAP system - which runs on VM ware from a lap top.
I have had a search around forums etc and have tried amending the icm/host_name_full in RZ10 but have not solved this problem.
I am hoping for some advice on how to best proceed.
Thank You,
Regards,
Mart.

OK, thank you for the advice so far. Just to clarify, as per e.g.'s in help, if I amend the icm/host_name_full parameter in rz10 to the following:
<host name>.<domain> <extension
This will then result in the url of the dynpro application becoming:
http://tdt.sap.de:8000/sap/bc/webdynpro/sap/zz__webdp3
Should the application work?
Regards,
Mart.

When I run csreource with -b option, I m receiving error

when I run csreource with -m option, I m receiving error. If I remove -b option, it works fine.
./csresource -b o=People, ou=test.calendar.com,o=cp -m [email protected] -c test create test123
Could not find calmaster
Unable to create resource calendar, aborting
Let me know what wrong I am doing. Calendar server is on Linux and Version is: 2005Q4

navvith wrote:
when I run csreource with -m option, I m receiving error. If I remove -b option, it works fine.
./csresource -b o=People, ou=test.calendar.com,o=cp -m [email protected] -c test create test123
Try the above command with quotes e.g.
./csresource -b "o=People,ou=test.calendar.com,o=cp" -m [email protected] -c test create test123Regards,
Shane.

Receiving errors (RUN BL on) (PASS BL blink) (FAIL BL off)

Similar Messages

Maybe you are looking for