Receiving "internal error" when trying to burn mp3 disc from playlist

I'm trying to burn an mp3 disc from a playlist that I've created. Unfortunately, I keep getting an error. I'm currently running iTunes 11.0.2 on my iMac which is currently running 10.8.3. I've done this many times before, and this is the first that I've had this problem. Here's the error I keep getting:
The attempt to burn a disc failed. An internal error occured.
If you want to retry the current failed burn, click on Retry. If you want to go to the next disc burn, click on Next. Otherwise click on Cancel.
Here's how it goes down:
I've created a very long playlist which will require the use of multiple discs.
I right-click on the playlist and select to burn the playlist to disc.
I then get the usual burn settings pop-up menu where I select the "MP3 CD" format with a preferred speed of "Maximum Possible"
Note: Since experiencing this error, I have tried varried speeds ranging from 8x to 24x; I still get the error.
Note Also: I have tried selecting "Audio CD" instead, and the playlist will burn and the error does not appear. This is not an option I want to go with, however, because of the length of the playlist — it would take, like, 25 discs...
For a moment iTunes will read the disc, then ask permission for the playlist to be split across multiple discs. I say "ok".
At this point, iTunes will say that it is initiallizing for about a split second then immediately say it's finalizing and spit out the disc. This is when the error pops up.If I select to "Retry", it doesn't retry to burn; it just saves a .txt file to my desktop that is a copy of the error message. There's no error code/number or anything, though - just the exact same message. "Cancel" and "Next" seem to behave correctly, though.
I have tried repairing disk permissions and restarting my computer. I've also tried using different brands of CDs: Memorex CD-R and Innovera CD-R. The error persists.
Any help on this issue would be greatly appreciated. Thanks in advance!

Some people (for reasons I don't know) have problems with Dynamic Link
What happens if you export MPEG2-DVD from Premiere Pro... import the 2 files (audio and video) into Encore... and do ALL of your authoring work in Encore?

Similar Messages

I keep getting encoding errors when trying to burn a disc

I created an iphoto slideshow and then shared it to idvd.
every time that i try and burn to a dvd it goes for about 4 to 5 hours and then gives me " there was an encoding error"
I checked the encoding settings and made sure to set it to just high quality but same issue occurs
Any ideas?

Hi
A. try to split the process into two parts
• Encoding part
• Burning part
by - instead of press burn key - go up to File and down to
• Save as a DiskImage
• then burn this .img file with Disk Util tool
B. What did the Error Messages read ?
Very helpful to get this info - to be able to give any true help at all. There are zillions of things to guess.
Yours Bengt W

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Receiving an error when trying to remove P00 Security role from the user

Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
Vineet

Hi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I received an error when trying to open itunes

I received an error when trying to open itunes. It said itunes stopped working, so I tried to uninstall and re-install. It let me install it, but when I tried to open it, it gave me the same error message. How can I get itunes back on my laptop (windows).

Perhaps is post what the error is someone might be able to offer assistance.
Also, have you had a look here > http://www.apple.com/support/itunes/troubleshooting/

Keep getting error code -50 when trying to burn a disc. how do I solve this?

Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

Keep getting error 4450 when trying to burn a cd from itunes

keep getting error code 4450 when trying to burn a cd from itunes library

lydia
we need much more info
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

I receive an error when trying to convert PDF to word. Pls help, I have a paid acct.

I receive an error when trying to convert PDF to word. Can someone advise on how to resolve?

"an error" really doesn't tell us much.
Assuming that you use the ExportPDF online service, I suggest that you Contact Customer Care - click on the Still need help? button to chat or talk with an agent.
[topic moved to ExportPDF forum]

I received an error when trying to sync my IPOD erorr 13019

I received an error when trying to sync my IPOD erorr # 13019

See my response to your other post.

"Medium Write Error" when trying to burn a CD!!!!

I keep getting a Medium write error when trying to burn an audio cd using ITunes. I already tried switching out cheap CD-R's for high quality ones and the same thing happens. I also can't burn a picture CD using finder because another error message pops up so i don't know what it could be... Any help would be greatly appreciated!

Could be an issue with the drive itself, especially if you have one of the Matshita drives installed in many Macbook Pro which are reported to be 'krappy' drives. See here for more info...
http://tinyurl.com/kgrz4
Patrick

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.

Receiving "internal error" when trying to burn mp3 disc from playlist

Similar Messages

Maybe you are looking for