Receiving point not saved in VA01

Guru's,
I working with the client who wanted to store the Unloading point and Receiving point during the VA01 (Order entry time). It works perfect when we enter these 2 values at the header level but it's not working when we enter at the line item level.
Please create sales order with at least 2 different items and entry the unloading point and receiving point. Save the order.   When you display the order (VA03), double click on the item level and click "Shipping" tab, you will notice only the Unloading point got saved but the Receiving point did not save.
When I recall the same order in VA02 and maintain the Receiving point, it then saves the data.
The problem we are facing is only during the first entry time.
Any help on this will be greatly appreciated and points will be rewards ASAP.
Please respond to my email [email protected]
Thank you very much,
Nevill
California, USA.

Hi AniKumar,
Can you please attach the pdf document regarding how to display unloading point hours in sales orders or forward to [email protected]
Thankyou

Similar Messages

Unloading Point & Receiving Point Not Visible in Invoice.

Hi All,
I have one condition type YFRT which is get updated on Unloading Point & Receiving Point.
I want to update it in Invoice but in invoice nowhere i can see Unloading Point & Receiving Point.
ie. which gets copied from SO.
Now its showing Unloading Point & Receiving Point missing when i update the condition in Invoice.
Condition record is maintained on Unloading Point & Receiving Point.
How to proceed?
Reg,
Antaa21

Hi
Does it get populated in your sales order ? THe reason I ask is that if you calculate the condition in the order and do not recalculate it at the time of invoicing you should get the condition copied as-is.
Anyway, if you need to fill the shipping point in the pricing structure, KOMK, you can use exit RV60AFZZ. Here you can add a logic telling the system where to find the value and set it in the invoice pricing.
Does it help you ?
best regards
Michael

Recent calls made and received are not saving in call log for Z10

all recent calls are not saving under call log in my Z10. where can i find the settings for call log?

I have the exact same problem, the call list remains empty no matter what...

Settlement Receiver Value not Saved in Table Control Program

Hi,
I have Table control program regarding to Equipment Log, where in output it show the Equipment details with Account assignment category, General settlement receiver, Shift Hours, Work Hours, Idle Hrs, Maint. Hrs., Production Hours etc...
In report, we have a formula i.e.
Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
and all those fields are linked to each other.
If we want that Work Hours should be 0, then msg showing - Working Hrs. should be entered. , means without enter Working Hrs. value we cann't save it.
Now we removed the link of Working Hrs to others, means if we insert value 0 of Working Hrs., no msg showing. BUT Problem is this after remove this link, General settlement receiver value should not be saved.
We want Work Hrs. as 0 value and General settlement receiver value must not be BLANK. It should be Saved.
Plz guide..

hi
write a if statement after the Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
if work hours = 0, message i000 with 'Working Hrs. should be entered'.
else ,write:/ shift hrs.end if. try to create a button for save when you click data will be saved or create a subrountine perform shift hrs than use if loop and select form end form inside keep Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
thanking you

PreE V8: In/Out Clip Set Points Not Saved in Preview Screen

After I set set in/out points in the Preview area on a clip then click on the X to close it, when I reopen the clip or when I drag the clip to the timeline/sceneline the set points are gone. I have to first drag the clip to the timeline then trim it. But then the trim points are not kept with the clip for reuse if I drag the clip a second time to the timeline.
How can I get the set in/out points to be saved with the clip when I set them in the Preview panel?

I am using a Canon HF20 and imported the video files into an a Photoshop album using the Elements 8 Organizer like I always do.
I can clip in the timline with no problem. Just not in the Preview window and have it save the in/out points.

"Document Not Saved" Microsoft Excel 2010 SP1

We have a remote office which has a 2mb WAN link, The users in the remote office have a variety of Office installs from 2003 to 2010 SP1.
When attempting to open an excel file over the WAN link (The file is on our main shared drive in Sydney) they can open and edit the document however when it comes to saving they receive "Document not saved" and the original document is gone and a .tmp file
remains where the original file was on the network drive/shared folder.
If they then hit save a second time it saves correctly and the document is in the correct .xls format.
The excel files do have some funky tables etc in them and are a few mb's in size, however we have the same issue with a new excel document with only one word written in it.
Does anyone know what would be causing this issue?
We have tried added NetworkResiliency and PivotTableNetworkResiliency as per http://support.microsoft.com/kb/291204.
We have tried removing certain hot fixes from Microsoft as mentioned in http://support.microsoft.com/kb/983458.
We added the share to be a trusted site.
There are no errors in Event Viewer.
I have found another few threads on similar issues with no fix:
http://social.technet.microsoft.com/Forums/en-US/office2010/thread/f559b061-b98f-4b33-ab8a-d1a41d2e8cb8/
http://social.technet.microsoft.com/Forums/en-US/officeappcompat/thread/4af962a0-d883-4e82-8995-7eb766d6c720
We do have a RiverBed at the remote office and one at the site in Sydney which is for network optimization. On the RiverBed with have all CIFS ports added and QoS marking done so it should be optimized.
Any assistance with how to fix this annoying issue would be greatly appreciated.
Thanks

We're having the same exact issue in our office where we just installed a new Riverbed Steelhead as well... only happening in that office as well...User opens a document on a network share that the rest of the company works from day to day, they save 10
or 20 minutes later and BAM... "There has been a network or file permissions error. The network connection may be lost", then a non-hidden *.tmp file is then created in the same network directory as the actual file and the original file doesn't get
written to, you click [OK] on the error and then try to save again and it magically works...and you're left with a messy TMP file as well in the directory now. I doubt it's related to antivirus, definitely not firewall, reinstalling/repairing office and tweaking
settings doesn't help, I agree it has nothing to do with locking files or read-only files as they're plain old word docs and excel files...MAYBE it has to do with the Riverbed WANOP appliance but either way... don't you love how this thread just randomly died
with no solutions? :'( Thanks Micro$oft ;)
{Edit} Oh! And one last thing...this MIGHT help steer someone in the right direction in the future... there could be a problem related to your network filer such as a NetApp appliance, EMC, Netgear etc where there is an SMB version mis-match or a bug of some
kind requiring you to apply a patch your storage device in order to fix this type of issue.

Configuration setting not saved

hi,
When i receive configuration setting for web beowsing on my mobile from my service provider.I get a message " trusted server setting received but not saved.message could not be authenticated and deleted."So i am unable to browse the web.Please help me .

You seem to have deleted the settings message from your service provider. Contact them and ask them to send it again. This time after you receive it you need to save it and it should auto install. Also sometimes there is a password to save it. If there is, the service provider usually sends you a separate message with with it.

HT1688 I have a PC computer and an I-phone 4s. I set up an i-tunes acct online w/ icloud. after a recent update my computer started receiving an error message on start up. it says "AppleSyncNotifier.exe - Entry Point Not Found". I click OK and it move

I have a PC computer and an i-phone 4S. I set up an i-tunes acct online w/ icloud. After a recent update my PC started receiving an error message on start up. It says "AppleSyncNotifier.exe - Entry Point Not Found". It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll". I click on OK and it moves on. It doesn't seem to affect my computer, but it's annoying. Any ideas on correcting this?

UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Save point with POJO DataControl not saving model state

Hi Guys,
JDEV 11.1.1.6 64bit
I was able to get save points working with ADF BC (AppMod, View & Entity objects)
but when I tried to do the exact same with Pojo DataControls, I won't save
the current state of the model - meaning things are not "selected" to the
proper record when the SP is restored. I don't get any errors, it just
shows the wrong data.
Example:
The BTF is marked as must have transaction(tried either way), but this is Pojo, and doesn't support Trx.
edit-emp-dept.jspx (with BTF Region)
BTF START
    STEP 1: RichTable with bindings to Pojo DataControl (value="#{bindings.allDepts.collectionModel}")
                 (user selects the 3 record => sales department)
    STEP 2: Edit Sales Dept & on click to next step create SP
    STEP 3: View Emps (Rich Table of ALL emps in that DEPT)
    STEP 4: Edit Emp
    FINAL: COMMIT (save to pojo list) or CANCEL (don't save to pojo list)
/BTF END
At STEP 1 -> STEP 2, the SP is created, and when I close the browser at STEP2, 3 or 4, and
restart, and choose SP to restore, it takes me to proper page (STEP 2) but the wrong Department is
selected to edit (it shows "Finance" instead of "Sales") & if I hit my ADF back button, it shows
the table with "finance" selected. In the ADF BC world it works perfectly.
I know the docs say: the ADF Model is saved, so the question is why bindings.allDepts.collectionModel
not "saved" here for Pojo DC and the ADF BC af:table value="#{bindings.DepartmentsView1.collectionModel}"
it is "saved".
Thanks for any insight or work-around.
Sincerely,
Joel
edit-emp-dept.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:form id="f1">
        <af:region value="#{bindings.btfpojodc1.regionModel}" id="r1"/>
      </af:form>
    </af:document>
</f:view>
</jsp:root>

Hi,
the problem with POJO DC and other non-ADF BC models is that they don't passivate their state. In JDeveloper 12c we allow developers to extend their POJO classes with ADF lifecycle methods that allows them to save the model state themselves. Its a known issue that the transaction state cannot be saved for non-ADF BC models. I checked the bug database for bugs filed against this behavior but could not find one- I can imagine that with 12c we would have a chance to allow developers to handle passivation / activation for non-ADF BC model states. So if this is a feature you need then filing an enhancement request would make sense
Frank

Message received: icloudexe.entry point not found. Do you know how to fix?

message received: icloudexe.entry point not found. Do you know how to fix?

Try a system maintenance utility like Yasu:
http://jimmitchell.org/projects/yasu/
Free for use, though the developer accepts donations.
Most likely you need to repair permissions and Yasu will do that for you and some other general housekeeping.

Safari.exe - Entry Point Not Found

I just recently installed Skype because Yahoo! instant messanger has been giving me problems. Safari was running just fine last night, and when I turned my computer on this morning, I received this message:
Safari.exe - Entry Point Not found
The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
When I click "OK," I receive this message:
Safari can't open.
Your copy of Safari is missing important software resources. Please reinstall Safari.
I have reinstalled Safari several times, but I still receive the same messages. I had found a thread from 2010, and attempted to try what was suggested on there, and it suggested to uninstall the AAS as well as safari, and now I cannot open iTunes. This is very bothersome because I use Safari as my primary browser.
Some aditional information, I am using a PCLaptop and running Windows 7. I have a lot of things saved in my bookmarks on Safari, and really would not like to use them. Also, I am a bit computer illiterate and need everything spelled out for me.
Help please!

Safari for Windows is long dead. I suggest you remove it and let it rest in peace.

Non admin user - changes not saved (Safari settings, system prefs, etc.)

iMac, 2 users, one is administrator and other is standard user. Recently, in the non-admin user account, it has become impossible to make any changes. For example, adding an application to the the Dock, after logging out and back in next time, the application is not in the Dock any more. Also, making changes to the prefs in Safari, changes are not saved.
I noticed this after installing FireFox v4. I installed it as admin whilst in the non-admin users account. However, I don't believe that the installation of FF has anything to do with the problem, it just highlighted it. I've checked the permissions for the various directories that hold prefs info such as user/libraries/application prefs/etc. etc. and also Safari prefs. Nothing I can see that has changed in system prefs.
Any ideas on what has caused the problem (kids are known to fiddle from within the non-admin account) and any ideas on how to fix it?
Thanks

Hi PPRuNe,
You could try making the standard user an Admin too. To do this, make sure you are logged in to the standard user, go to System Preferences > Accounts > Standard user (you may have to unlock the padlock) > Allow user to administer this computer
This will allow changes to be made without being prompted for a password all the time.
However, if you had Parental Controls on, they probably won't work on an admin account because as an admin you have complete control over a computer, so the computer thinks there is no point in having the controls turned on. And if the kids are known to "fiddle," just think carefully!
Hope this helps you.
Chris.

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

Receiving point not saved in VA01

Similar Messages

Maybe you are looking for