Receiving roughly 50% of the texts I should be

I'm incredibly frustrated as I'm not receiving half the messages I should be. I've noticed this over the last 3 weeks that every couple hours I miss texts from all my contacts.
I am ready to throw in the towel as it's incredibly inconvenient as often I'm missing business texts and has resulted in me missing two lunch meetings.

Hi and Welcome to the Community!
Especially since SMS is a function of your voice-level services (as opposed to your BB-specific data-level services), I recommend that you contact your mobile service provider for formal support and potential formal escalation up to BlackBerry for investigation of your issue.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Friend received a text from me saying that to read the text he should hit the download button that i did not send

Just got a text from a friend that claims he received a text from me. This text told him that to "receive my text" he needed to hit a download button that was in the text. i DID NOT send him any text! This is alarming! I immediately changed my Apple ID and password. Should i be worried? Has anyone experienced this and what does it mean?!

Perhaps your friends phone has been hacked.
Unless yours has been jailbroken, it has not been hacked.
It would seem far more likely that your friend has the issue, than you.

How to stop receiving a copy of the text that I send out?

I downloaded IOS 7 and now I get a copy of the text messages that
I send out.

Macbook Pro, bought in july
If your Mac is runing Lion v10.7 try disabling Resume.
How To Disable Lion's 'Resume' Feature - MacRumors.com

We can receive our email but the text does not show up - what has happened

we have had our Iphone for some time and always received the complete email with headers and text below without a problem - since coming to the mountains of Montana, it worked fine but now we receive the headers TO FROM SUBJECT etc but no text shows up - what could be the problem? [email protected]

I'm not sure how, but I was finally able to get to the sign in page. I've got it working, now. Thanks anyway.

On the basis of Sales item Text, item should get copied to Return order

Hi
I am creating Return order With ref to Billing Doc.
when i click on copy one popup is coming that is for Sales item Text.(I want to click on Copy & not Selection List B'cos in Selection List Sales Text will not come)
So as per the Text i should select the material in Return Order.
but when i click on red cross on Sales text window(POP Up), that material also getting copied in SO, which was not happening earlier...
any configuration in Sales Text is there or some Userexit is there???
Reg.
Amol

Hi AL,
As such, this is a basic functioanlity of MRP.
Once you enter a forecast & take a MRP run system proposes, when to start the production based on the production leadtime & purc.reqns for the raw materials based on the procurement lead time.
And the same can be viewed from various reports..FOr example MD04.
For this to work the MRP configurations should be valid.
Could you please confine your question to a specific query..?
Thanks & regards
Mahesh

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent. However, when I send a picture with a text message, then it goes through to the contact. Why am I getting

I have one contact that I've been texting for months, about 5 hours ago, I started receiving an error that the text was not sent. However, if I text a picture and then text with the picture the message goes through. Why am I getting this error?

You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible)

How to fetch the text dynamically from text modules

Hello All,
I have a requirement where the I need to print the Form in multiple languages. For this I have created textmodules and maintianed translations as well. But for Spanish and Portugese there are two version languages. For example Spain has Spain english and South American english, similarly Portugal Portugese and Brazilian portugese.
In se63 transaction, we dont have two versions.Only one of them is available.
Therefore I've created a custom table where in which I will mainted country.langauge and textmodule name as 3 coloumns. I have cretaed a FM
where in I pass the country and language as import params to get all the respective text modules.
Now I tried to move the textmodules to some some structure which I finally moved it to Context part in Adobe form.
Now I tried to create text module, by giving variable name in the text field. For example i have passed &st_dun_texts-email&.
It says text module does not exist.
I have also created using dynamic text.There field name would be passed.But In the output I am getting the Text module name but not the content inside the text module.
The actual content which is there in the text module should be printed
Can anyone please help me out on the above problem. ? It is urgent....!!!!!

you could use SET LOCALE LANGUAGE myLanguage - so you can switch to the desired language and all texts will selected from that language.

Space left in the printout after hiding the text element in smartform

Hi
In my smartform there is space left in the printout after hiding the text element with condition.
Is there any way by which we can remove the space in the smartform,
Thanks
Ank

Hi ,
I am displaying the text in table with two columns and in one column i am giving the text elemnt and in other the value.
I had given the condition that if the data is not present then the text elemnt should not be shown in the form .My form is working perfectly except that its leaving the space for that text element.
thanks
Ank

How maintain the Customise setting for copy the text to sales doc to sales

Hi SAP Gurus,
How to customise the text for copy to sales documents to sales documents and output.Kindly needful for me.
Regards
Vikram.M

This is determined based on the access sequence specified for the Text ID.
You can go to IMG/logistics execution/Basic shipping functions/Text control/Define access sequences for determining texts.
You may also use t-code VOTXN.
If you are trying to check text being copied to delivery header,then click the radio button for the delivery header and click display. go to the relevant text determination procedure and
Check the access sequence assigned to the Text id not being copied.
The Text object should be VBBK to copy texts from sales order header,VBBP for sales item texts.
You can compare it with your other text ids and their access sequences and make the necessary change to the one that is not being copied.
Regards,

MacBook with 10.6.6 using Firefox 3.6.13. Parts of many websites not loading properly, from banking to Google searches. I'll see some of the text on the page, but most is missing.

Example: I do a Google search using the word 'Firefox' and see most of the Google upper left corner details but no info or URLs actually load so no searching can be done.
If I copy and paste a chunk of the page, I do see the text that should be visible, but is not.
Is there a way of sharing screen grabs? Easier than describing this.

No I'm not using NoScript, but I'm pleased to report that the problem got resolved by deleting the original bookmark, logging in again, opening Google calendar, then bookmarking it again.

I have a psd file with many layers and text. I want to edit the text. How do I do that?

Hi all!
I recently purchased a book cover from a creative....she charged me one amount for the jpeg file and another amount for the psd file and then there's another cost to edit the text on the back cover. Instead of paying all these fees separately I'm trying to edit the text on my back cover myself.
The problem is I HAVE NO CLUE how to do this....anybody have any help to offer?

In the psd file, on the right side you should see a panel that says Layers. Expand that panel if it is not already by clicking on it.
Scroll down through the list in the layers panel until you find the text (there should be a large T for a thumbnail to show it is text)
Double click on that large T to edit the text. (The text should now be highlighted and the Text tool on the left side of the screen should be selected)
Type away then select any other layer to deselect the text
If you do not see any large T capture your screen with the layers panel open, so we can see what layers are there.

How do I make the "text" after the checkboxes visible?

(The Dreamweaver 8 text reads, as follows)
quote:
To add checkboxes to a form:
1. Click in the left column of the sixth row, type
Check all of the musical styles that interest you.
(including the period), and then press the
Tab key to move the insertion point to the next cell.
2. Click the
Checkbox button in the
Forms category on the Insert bar to insert a checkbox in the
cell.
3. In the Property inspector, type
Punk in the Checkbox Name text box, and then click the
Unchecked option button, if necessary.
4. Click to the right of the checkbox in the table, type
Punk, and then press the
Shift+Enter keys to create a new line in the cell.
5. Repeat Steps 2 through 4 to create the following
checkboxes:
Alternative,
Trance, and
Jazz. See Figure 9-33 (Pg.515 Dreamweaver 8 textbook)
The following is the CODE where I added checkboxes to a form:
quote:
<tr>
<td><div align="right">Check all of the musical
styles that interest you. </div></td>
<td><div align="left">
<input name="Punk" type="checkbox" id="Punk"
value="checkbox" />
<br />
<input name="Alternative" type="checkbox"
id="Alternative" value="checkbox" />
<br />
<input name="Trance" type="checkbox" id="Trance"
value="checkbox" />
<br />
<input name="Jazz" type="checkbox" id="Jazz"
value="checkbox" />
</div></td>
</tr>
However, the only thing I see in DESIGN View is this the
previous text, "Check all of the musical styles that interest you."
and the four checkboxes "without" the text that should follow each
box .
Please, help, explain what steps I should take, next, to make
the following words (Punk, Alternative, Trance, and Jazz) visible
in the DESIGN View, following each of the four checkboxes.
Thank you for your help!
This Support Forum is the BEST!
Respectfully, Ona

Sorry - you're sending us to the Webforum which is a real
pain to scroll
miles through to discover what questions and answers there
are. Could you
start a new thread? It looked as if it might have been a
discussion with
Murray but it's really difficult to tell as the last I saw
was Murray asking
you to do something - I think.
Jo
"OnaTutors" <[email protected]> wrote in
message
news:f3iuuc$moe$[email protected]..
> Geschenk, You ROCK!
>
> THANK YOU! THANK YOU, SO MUCH!
>
> You went ABOVE and BEYOND the call of duty! Thank you
for helping with
> the
> other errors in my CODE, too.
>
> You saved my Final Project for my course in Web
Construction 2, due
> "tonight"
> @ midnight!
>
> I've just got 2 more questions to troubleshoot!
>
> Thanx for all of your help!
>
> If anyone is interested, these are the other two
questions that I'm
> TROUBLESHOOTING:
>
>
>
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid=
> 1271560
>
>
>
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid=
> 1271584
>
> Thanks for helping me out, everyone!
>
> Respectfully, Ona
>
>
quote:
Originally posted by:
geschenk
> you do have some quirks in your current form -- as to
your checkboxes ::
> please replace the current
value="checkbox" with e.g.
>
value="Punk", and furthermore you just need to place a plain
text
> description after the checkbox tag
>
> that´s it ;-)
>

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Receiving roughly 50% of the texts I should be

Similar Messages

Maybe you are looking for