Receiving runtime error in PSE 11 on opening program.
Anyone have an idea what the problem is. PSE (all versions) have run just fine until today.
Oh, great...an "unknown" faulting module!
There's not a lot to go on, so I can only offer a couple of general troubleshooting suggestions:
Re-set the Editor's Preferences by holding down your Ctrl+Alt+Shift keys when launching the Editor and keep them held down until you see the prompt asking if you want to delete the Preferences. Answer "Yes" and they will be re-built. You may have to minimize any open windows in order to see that prompt.
If you have manually enabled the TWAIN interface for scanning, see this Adobe document:
http://kb2.adobe.com/cps/408/kb408850.html
See this Adobe document for general troubleshooting steps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Ken
Similar Messages
-
Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working
Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer. -
Crystal Report Runtime Error 9.0.Could not open the report
Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.NHi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan -
I get a runtime error when I try to open itunes, any help?
I get a runtime error when I try to open itunes, any help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Bought the original Creative Suite package 1n 2004, installed on my new apple G5. Upgraded in 2009 to CS4 and sometime installed on a 2nd computer. I'm sure I registered each product. I don't have the original disk's, but I have the serial number. I'm trying to install CS on my new I Mac. It fails authorization in the download. I went ahead and downloaded the 30 day trail like suggested. I get the "legacy Java SE 6 runtime" error when i try to open psd. After my first attempt failed and I read the help lessons on deactivation, I believe I have deactivated from the G5, but I'm still getting the same code when trying to open psd.
Download and install: Java for OS X 2014-001
Reboot your Mac.
Let me know how it goes.
Gene -
Hi,
I have tried several times to create a DVD of a movie with several Scene (w/Stop) Markers only to receive 'runtime error: Unknown exception' with 99% completion.
I'm using Adobe Premiere Element 11 ver 11.0 (20120901.B261.425551).
I'm running Windows 7 Ultimate w/SP1 on a Dell XPS M1530 w/4GB Memory
I have created DVDs in the past with little or no problems.
Would appreciate any help with my problem.
Thanks...Harry
Thanks for the additional information.
Typically, if you are doing a multi movie Timeline and you want the viewer to be able to navigate to a specific movie followed by return to main menu, then:
Main Menu Marker at beginning of movie 1 and Stop Marker at end of movie 1....then gap of at least 12 frames...Main Menu Marker at beginning of movie 2 and Stop Marker at end of movie 2....and so on. But for the last, remember no Stop Marker at the end of that last Movie on the Timeline.
With those 25 .mts video clips, are you sure that you want or need all those return to main menu possibilities.... a scene marker at the beginning of each and a stop marker at the end of each for a return to menu after each of the 25 video clips? Especially if these are small video clips.
Large project...
Keep in mind that the DVD disc 4.7 GB/120 minutes is in reality 4.3 GB capacity. So as you can tell my the program's lowering of the Bitrate (8.00 to 7.97 Mbps), the program is trying to make the fit by lowering the bitrate. Depending on how your troubleshooting goes, you may want to start thinking about DVD Double Layer Disc (8.5 GB/240 min) if your project gets much larger. In the case of the DVD double layer, 8.5 GB is in reality 7.3 GB. Typically, lower the Bitrate, the lesser is the Quality of the end product. So you do not want to force the program to lower the Bitrate to low to make the fit.
As for the Timeline - + slider to which I referred...
In the above screenshot, please note in the right side of the Premiere Elements 11 Timeline (Expert view)...from left to right at that location,
the Render Button
the icon named "Fit to Visible Timeline
the icon named Zoom Out ( - ) which is related to the slider to its right
the icon named Zoom In ( +) which is related to the slider to its left
That slider is moved by either of those icons or by moving the circular button of the slider with the mouse curser.
We will be watching for further developments.
Thanks.
ATR -
“Tried to Download_Adobe_Premiere_Elements_13_Mac 2” and received this error message can’t be opened because the identity of the developer cannot be confirmed.
That's Apple OS X's Gatekeeper feature kicking in. Nothing to do with Adobe.
How to open apps from an unidentified developer in OS X Mountain Lion | iMore -
i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?
Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I was watching my daytime program "Young and the Restless" when the video stopped and the error message came up: "I receive this error message when watching my daytime program; The video you have requested is either unavailable or is being blocked by an adblocker installed in your browser
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
When I attempt to access the editor in PSE9 either directly or from the organizer I get the following message:
"Runtime Error!
Program:...s\Adobe\PhotoshopElements9\PhotoshopElementsEditor.exe
This application has requested the Runtime to terminate it in an unusual way."
Uninstalling and reinstalling PSE9 has no effect on this error.Oh, great...an "unknown" faulting module!
There's not a lot to go on, so I can only offer a couple of general troubleshooting suggestions:
Re-set the Editor's Preferences by holding down your Ctrl+Alt+Shift keys when launching the Editor and keep them held down until you see the prompt asking if you want to delete the Preferences. Answer "Yes" and they will be re-built. You may have to minimize any open windows in order to see that prompt.
If you have manually enabled the TWAIN interface for scanning, see this Adobe document:
http://kb2.adobe.com/cps/408/kb408850.html
See this Adobe document for general troubleshooting steps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Ken -
Runtime error - R6034 (Help unable to open Itunes)
Hi All,
After upgrade of Itunes I get the following error when trying to open Itunes
Runtime error
R6034
An application has made an attempt to load the c runtime incorrectly
Any ideas on what to do?
Best regards,
MetteHi MettefromDXB,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I hope this information helps ....
Have a great day!
- Judy -
Can not access itunes, receive runtime error
can not access itunes, receive a runtime error box
Hi there,
Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files THEN folder(s). The location of the folders is documented in this link from Apple. -
Portal Runtime Error --- Portal content is not opening
Hello Experts,
While logging to the system we are getting this message
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.toolAreaiView
Component Name : com.sap.portal.navigation.toolarea.default
The exception was logged. Inform your system administrator..
Exception id: 10:13_02/04/09_0039_12182150
See the details for the exception ID in the log file
How to resolve the issue ??
Moreover we are unable to drill down the portal content in portal content page. It is in "loading " status for long time. Is there any problem.
Regards,
ParthaHi Sandeep
" You have to log in as an Administrator when using the NOTE referred in the previous post "
--> Yes, I am logged as Administrator user
"I hope you are using your FQDN instead of IP address"
--> Yes i am using FQDN
1. When was the last time you portal was working fine?
--> Till yesterday , today morning while checking the day to day activity I found the issue
2. What changes have you done?
--> We didn't change anything in production portal, it is a satnd alone JAVA stack but we have made some some changes in backend R3 system which is a diffrent system on different server
FYI ---> We are facing the problem with portal content not expanding for quite a long time.
3. Which portal version and which sp level are you on?
--> EP 7.0 and SP11
4. Which browser are you using for your portal?
--> IE 6.X
Thanks for your help.
Thanks and regards,
Partha -
Runtime error r6034 when try to open itunes
How do I fix runtime error r6034?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I'm recieving and error (-50) when trying to open itunes 10.5 beta. Any suggestions would be greatly appriciated!!!
As a registered developer which should be the only way you have access to the iTunes and iOS BETA, you have access to direct communication with the appropriate Apple personnel and/or access to the Apple forums for registered developers.
Maybe you are looking for
-
Error while Updating the Apps Adapter
Team, I am getting error while i am updating the Apps Adapter, I have created an new data source and an new connection pool like below, 1. created the Data Source with the following values. Data Source name : DevDataSource JNDI Name : jdbc/Dev/Apps 2
-
Why won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.
-
How can I reduce the width between search results and the preview fly-out?
Hello, I am using a custom masterpage that reduces the overall width of page content but I am seeing an issue with my enterprise search site. The search results look fine but there is a large horizontal gap between the results and document preview wi
-
PKCS#11 support in J2SE 1.4
Hello All, First of all I am quite new to Java PKCS#11 support (only couple hours into it :) ). I found out that J2SE 1.5 has the sun PKCS#11 provider pre-configured into it. However, I want to use the PKCS#11 provider with J2SE 1.4 as well, but I am
-
SEM-BPS Distribution with Reference Data
All, Our planning design is such that our plan values are in one cube and our actuals are in another. We use a mult-planning area to tie the two together. One of our requirements is distribute planning values from one cost center to other cost cente