Receiving the same text message multiple times when person only sent it once. How can I make it stop?s from
I received the same message multiple times and the person that sends it only did it once. Also, I have trouble getting texts from non iPhone using friends.
It's actually probably a carrier (or hardware) issue on the sender's end. Tell the sender to pull the battery from their phone (or reset it if the battery is non-removable). I've seen this issue with certain HTC phones (HTC did release an update which solved the issue on my Thunderbolt). As far as I knew, I only sent the message once. However, it would show up multiple times on the receiver's phone. Pulling my battery would solve the problem for a while. It did take the software update to stop it permanently.
Similar Messages
-
Hi
I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
CheersDeleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.
-
I Keep Receiving The Same Text Messages Multiple Times
Every single time someone texts me, it doesn't matter who, I will receive the same message from them multiple times. At first I thought it was just them resending their message but I asked and they said no. After a few days it started happening with all my contacts that I text. Sometimes it's every other text message and sometimes it only happens a couple of times but it's extremely annoying. It got so bad that I had to bump up my plan to Unlimited Messaging just so that I wouldn't go over my limit because I think that it's counting the multiple messages! Also, I've tried updating my phone and that didn't work.
Does anyone have any tips or solutions to this problem? Any help would be greatly appreciated!! Thanks.Hi cbf10,
I am sorry to learn of the erratic duplicate messages you are receiving from several contacts. Let's narrow the potential issues that may be causing this behavior. Are you using a 3rd party application to send/receive text messages (i.e. Handcent, Go SMS, etc...)? Have you altered the operating system software in any way? What is your software version, baseband, kernel and built number?
Clearing messaging data/cache as applicable may resolve the issue: Menu>Settings>Applications>ManageApplications>All>Messaging>Clear Data/Cache. Try it and keep us posted.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport -
IPhone keeps sending the same text message multiple times in a row.
My iphone (4s) keeps sending people the same text message multiple times (2-4) a few seconds inbetween. Sometimes it will tell me that there the message failed, but they still recieve it multiple times. I've already tried deleting the message tread and reset network settings. Nobody who has an iphone has said anything to me about it yet, only people with android.
It's a carrier issue. I have AT&T and had this issue with my friend (who had an Android) and my mother (who had a feature phone). Both of them have Verizon for service and I'm thinking the issue was on Verizon's end. They both just dealt with it as we tried all sorts of things to get this sorted out (other than contacting Verizon directly) and had no luck.
They've both switched to iPhones so it's a moot point for us now, at least.
~Lyssa -
i share an apple ID for itunes with 2 separate iphones, i update IOS to 6.1 2 months ago, my contacts megered on phones and now i get the same text messages on both phones. How do i fix this?
To use iCloud your iPhones and your Macs should all be signed into the same account, what are you trying to achieve.?
-
I am receiving the same text messages that i send out to another person?
Recently activated a new iphone 5c and i send a text out but two people are receiving the text. I know it is due to our Apple Account but i can't figure out how to change this.
go to settings- messages - send and receive- select the numbers and emails you want to use - deselect the ones you don't need
Peace, Clyde -
When I press a letter on the keyboard it does multiple letters when I only press it once
This has only just happened and it is not always the same letter. The letter on the keyboard changes from time to time. Sometimes the keyboard is unresponsive like when I want to add numbers. I will press "s" and 5 or 6 "s" will appear on the screen.
You could try it again, and you could also try closing all apps via the taskbar and see if that makes any difference : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
-
Droid X - Receiving same Txt message multiple times, repeatedly
After an upgrade back in September/October... I started receiving the same text message multiple times. It doesn't happen every time. For example, my Husband responds with "OK" and I receive the same message 5 times over a period of 4-5 hours.
Welcome ... SEARCH is your friend in this forum as most issues have already been reported. I did a quick search on "Multiple" and this popped up:
http://community.vzw.com/t5/DROID-X-by-Motorola/Receiving-multiple-duplicate-text-messages-since-latest-update/m-p/685893#M31790
There may be others as well. -
I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.
Hello vinay34,
If you are having issues with activating your Apple ID for FaceTime and iMessage, then take a look at the article below to get it sorted out. Make sure that you have the Date and Time set to Automatic as well as any other steps listed in the article.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/en-us/ts4268
Regards,
-Norm G. -
Bapi_po_create1 is giving same system messages multiple time in the joblog
Hi Experts,
Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
can u plz suggest how to prevent these multiple appearances of same messages.
I am pasting the code below whn i ran this program in backgorund job log is having the messages.
Date Time Message text Message class Message no. Message type
08/06/2009 08:11:53 Job started 00 516 S
08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY) 00 550 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Source not included in list despite source list requirement 06 722 E
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:55 Purchase order still contains faulty items MEPO 000 E
08/06/2009 08:11:55 Job finished 00 517 S
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PMHERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
REPORT zzztest.
DATA : lwa_bapimepoheader TYPE bapimepoheader
,lwa_bapimepoheaderx TYPE bapimepoheaderx
,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
,lwa_bapimepoitem TYPE bapimepoitem
,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
,lwa_bapimepoitemx TYPE bapimepoitemx
,li_conditions TYPE STANDARD TABLE OF komv
,li_return TYPE STANDARD TABLE OF bapiret2
, n TYPE c
PARAMETERS: p1 TYPE c AS CHECKBOX.
IF p1 = 'X'.
lwa_bapimepoheader-doc_type = 'NB'.
lwa_bapimepoheader-purch_org = 'NA00'.
lwa_bapimepoheader-pur_group = 'C02'.
lwa_bapimepoheaderx-doc_type = 'X'.
lwa_bapimepoheaderx-purch_org = 'X'.
lwa_bapimepoheaderx-pur_group = 'X'.
lwa_bapimepoitem-po_item = '10'.
lwa_bapimepoitem-material = '000000000000020111'.
lwa_bapimepoitem-plant = 'CA01'.
lwa_bapimepoitem-vend_mat = '1000'.
lwa_bapimepoitem-quantity = '10'.
lwa_bapimepoitem-orderpr_un = 'M'.
lwa_bapimepoitem-no_more_gr = 'K'.
lwa_bapimepoitem-agreement = '4600000095'.
lwa_bapimepoitem-agmt_item = '10'.
lwa_bapimepoitem-pricedate = 'X'.
lwa_bapimepoitem-price_date = '20071030'.
lwa_bapimepoitem-no_rounding = 'X'.
APPEND lwa_bapimepoitem TO li_bapimepoitem.
lwa_bapimepoitemx-po_item = '10'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-material = 'X'.
lwa_bapimepoitemx-plant = 'X'.
lwa_bapimepoitemx-quantity = 'X'.
lwa_bapimepoitemx-po_unit = 'X'.
lwa_bapimepoitemx-orderpr_un = 'X'.
lwa_bapimepoitemx-acctasscat = 'X'.
lwa_bapimepoitemx-agreement = 'X'.
lwa_bapimepoitemx-agmt_item = 'X'.
lwa_bapimepoitemx-pricedate = 'X'.
lwa_bapimepoitemx-price_date = 'X'.
lwa_bapimepoitemx-preq_no = 'X'.
lwa_bapimepoitemx-preq_item = 'X'.
lwa_bapimepoitemx-no_rounding = 'X'.
APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
DATA: lo_msg_handler TYPE REF TO cl_message_handler_mm.
CALL METHOD cl_message_handler_mm=>get_handler
IMPORTING
ex_handler = lo_msg_handler.
lo_msg_handler->remove_all( ).
lo_msg_handler->cleanup( ).
CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
EXPORTING
poheader = lwa_bapimepoheader
poheaderx = lwa_bapimepoheaderx
testrun = 'X'
NO_MESSAGING = c_x
NO_MESSAGE_REQ = c_x
no_authority = 'X'
IMPORTING
expheader = lwa_bapimepoheader
TABLES
return = li_return
poitem = li_bapimepoitem
poitemx = li_bapimepoitemx
conditions = li_conditions.
ENDIF.
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM -
HT3529 Is it possible to send a the same text message to multiple recipients?
wanting to send the same text message to multiple contacts at the same time? is this possible
Are you talking about in the contact window? Because when I select a contact in there the contact window appears and the plus sign in the top right is replaced with the edit button?
-
My Revolution Not Receiving The Whole Text Message
Hello, lately I have been having a problem receiving the whole text message. People with smart phones text sometimes page length texts. I have no problem sending out page length text, but when someone sends me one, from many different companies and phone types, I only receive what the phone recognizes as the first part of the text message.
An Example is:
"Hello, I was wondering what you are doing later. I was thinking we could go to the shopping later at the mall. Do you ha"
I primary text people so when I do not receive the whole text it is very frustrating.It's lies that you haven't received any other complaints on this issue. 1) because I have called repeatedly on this exact issue among many others with this phone and 2) here are some of about a dozen posts on this:
https://community.verizonwireless.com/message/876695#876695
and another:
https://community.verizonwireless.com/message/875860#875860
and another:
https://community.verizonwireless.com/message/875820#875820
granted some are recent, but if you search your forums you will see plenty.
You used to and still state that you never hear of any of the many issues with this phone, including when it would randomly reboot. Same phrase, "we have yet to hear of other cases with this device." Bull...
I too will be heavily considering leaving Verizon after over 10 years of being a customer not due to an LG phone sucking this bad, but your company's repeated refusal to acknowledge our concerns and treat us like we are ******.
Like your master reset phrase above. So you think that computing devices need a fresh start anytime something goes wrong is just not correct. If that were the case every time I have fragments between nodes in a clustered server environment I'm supposed to factory reset them?! NO, you debug it and get it working correctly! This issue is fragmenting withing your sms/mms delivery system, so fix it! As a sysadmin for a scientific super computing institute I guarantee I know more about computing devices than you ever will, and I can say your workarounds are asinine and only prolong your customer's issues with a clearly defective device.
As with this, although not your manufactured device, it is something you sell and therefore you debug these issues across your network or give those of us that can the ability to do so, but alas another locked boot loader and if we were to root the device to mitigate these issues then we screw our self by trying to help our self. It's always our fault, as we must have done something wrong. -
Re: Running the same (Forte) application multiple times -for different
Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Can I have the same printer installed multiple times under different names?
On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
OmarBack Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD -
Can I get the same text messages on both my iPhone and my iMac
can I get the same text messages on both my iPhone and my iMac
It seems that my Mac is getting them and they dont show up on my iphone.Hi julian KAYE!
You will want to make sure that both your computer and phone have all options checked in the “Start new conversations from” section in your Messages settings:
iOS: Using Messages
http://support.apple.com/kb/ht3529
You can change the address that new iMessage conversations are started with in Settings > Messages > Send & Receive > Start new conversations from. Note that this setting applies only to new conversations. If you would like to change the address from which messages are sent, first change this setting, and then delete the existing conversation and start a new one.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
iTunes will not open on my dell laptop any more. I have uninstalled and downloaded several times but no joy. I would welcome assistance with this problem please. Thank you
-
How to buy iSight camera?
I have a 30" Apple Cinema HD display with no iSight camera. For some reason, I can't find an iSight camera for sale at the Apple Store. Do you have to buy a new computer to get the iSight?
-
Hi, iPad screen won't flip when in emails-fine all other applications?
Hi, I can't get the screen to flip when I'm in the email programme. All other programmes work fine. iPad only 3 days old- worked fine in email until yesterday.
-
How do i make the icons on my desktop smller?
How do I make the icons on my desktop smaller?
-
Automated Test tools for Forte 4GL ....
We're investigating a variety of automated testing tools for our Forte 4GL applications. Some of the companies mentioned are ClassIQ, Mercury and Rational. Does anyone have any experience with any of these test tools ? Any suggestions or comments (pr