Receiving Transaction Manager stop & start for every 1 min

Hi Gurus,
Current Setup:
Ebiz instance is multinode setup
DB - 2 node RAC
CP - 2 node - PCP (DB and CP are same server but OS login different)
W&F - 2 node - Load Balanced
iRec - 1 node
Ebiz version : 12.1.3 and db is 11GR2
Issue: Receiving Transaction Manger,PO Document Approval Manager and INV Remote Procedure Manager are deactivated automatically and start by itself for every 1 min., rest other managers are up and running,
pls help , thanks in advance
Edited by: 929510 on Apr 23, 2012 4:31 PM

Issue: Receiving Transaction Manger,PO Document Approval Manager and INV Remote Procedure Manager are deactivated automatically and start by itself for every 1 min., rest other managers are up and running, Was this working before? If yes, any changes been done recently?
Can you find any errors in the CM/DB log files?
Please run these scripts.
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues [ID 171855.1]
Thanks,
Hussein

Similar Messages

  • Error while Running Receiving Transaction Manager

    Hi.,
    We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
    we have two Receiving Transaction Manager process.
    Error
    "APP 00204: Concurrent manager encountered an error while running the spawned
    concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"

    Hello.
    Have a look on MOS Doc ID 1071727.1
    Octavio

  • Receiving Transaction Manager Time out in iProcurement Receiving!

    Hi All,
    Database:10.2.0.4.0
    Oracle Aps:12.0.6
    O/S:AIX 64 bits 5.3 L
    We are unable to create any receipts due to following error.Checked Receiving Transaction Manager and that is running fine.
    Error Message
    Your receipt could not be created successfully because your receiving transaction manager timed out.
    Please contact your System Administrator for further assistance.
    Steps To Reproduce
    The issue can be reproduced at will with the following steps:
    1. In Iprocurement select requisition to receive
    2. Enter required data and press submit
    3. on screen receive Items: review and submit get above error message
    Profile RCV: Processing Mode is currently set to 'online'
    Could anyone please share resolution to such an issue faced before.
    Thanks for your time!
    Regards,

    Follow the Metalink ID: 375152.1

  • Receiving Transaction Manager Errors out

    I am getting this meesage whle doing Inter-Org transfer that Receiving Transaction Manager as errored out. There is no error code displayed or similar.
    Any thoughts where I can find the log/details of this error?
    Thx

    Please see the solution in (PODAMGR And RCVOLTM Inactive And Cannot Be Started (Doc ID 726158.1)).
    Are there any errors in the database log file?
    If the above didn't help, please run cmclean.sql and ccm.sql scripts.
    Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1)
    Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues (Doc ID 171855.1)
    Thanks,
    Hussein

  • Receiving Transaction Manager concurrent program errors out with INACTIVE, NO Manager

    Hi,
    We have an R12.1.3, 2-node (1 node Apps, 1 node DB) ERP system on Sparc 64, Solaris 10 Machines.
    All the concurrent managers including Standard Manager and Receiving Transaction Manager are running fine.
    When we are running the concurrent program Receiving Transaction Manager(RCVTPO), it errors out with Inactive No Manager error.
    I am not being able to find any errors in the log files of CM or DB.
    Could someone help me resolve this error. Its kinda urgent
    Thanks.
    Muneer

    Please see the solution in (PODAMGR And RCVOLTM Inactive And Cannot Be Started (Doc ID 726158.1)).
    Are there any errors in the database log file?
    If the above didn't help, please run cmclean.sql and ccm.sql scripts.
    Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1)
    Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues (Doc ID 171855.1)
    Thanks,
    Hussein

  • Con. Req. 'Receiving Transaction Manager' Inactive/No Manager : This request is an unconstrained request. (queue_method_code = I) , No concurrent manager is defined to process this request, so it cannot be processed.

    Hi Gurus,
    I need your help on a concurrent request ( Receiving Transaction Manager ) showing as Inactive/No Manager.
    EBS: R12.1.2 on Linux
    Database: 11.2.0.3 on HP UX Itanium
    A user is submitting the concurrent request - "Receiving Transaction Manager" (It is a concurrent program not a concurrent manager).  The request ends up as Inactive/No Manager. When I click on the diagnostics button this is what it shows -
    "No concurrent manager is defined to process this request, so it cannot be processed.
    Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules."
    I ran analyzereq.sql and the analysis is
    Analysis:
    Request 1427025 is in phase "Pending" with status " Normal".
                               (phase_code = P)   (status_code = I)
    This request is an unconstrained request. (queue_method_code = I)
    It is in a "Pending/Normal" status, ready
    to be run by the next available manager.
    Checking managers available to run this request...
    There is no manager defined that can run this request
    This should show on the form as Inactive/No Manager
    Check the specialization rules for each
    manager to make sure they are defined correctly.
    Additional information (from apps.FND_CONC.DIAGNOSE):
    No concurrent manager is defined to process this request, so it cannot be processed.
    Contact your system administrator to define a concurrent manager to process this  request or to verify that existing concurrent managers have the correct specialization rules.
    I ran another SQL to find out which manager runs the program :
    select CONTROLLING_MANAGER,request_id
    from fnd_concurrent_requests
    where request_id=1427025;
    It returned blank (or) NULL for controlling Manager.
    select b.USER_CONCURRENT_QUEUE_NAME from fnd_concurrent_processes a,
    fnd_concurrent_queues_vl b, fnd_concurrent_requests c
    where  a.CONCURRENT_QUEUE_ID = b.CONCURRENT_QUEUE_ID
    and    a.CONCURRENT_PROCESS_ID = c.controlling_manager
    and    c.request_id = 1427025;
    Returned Nothing.
    I thought that for a concurrent program when no specific manager is defined, Standard Manager is the default. Is my understanding wrong ?? Have anyone of you faced this issue? How did you fix it ?
    I did check the profile - Concurrent: Conflict Domain for the responsibility and it is blank.
    Appreciate any help.
    Thanks
    Cherrish Vaidiyan

    Was this working before? If yes, any changes been done recently?
    Your understanding is correct, unless this concurrent program is excluded from being processed by standard manager.
    If the request was not processed then the no rows output is an expected behavior -- (Doc ID 344011.1)
    Have you tried the solution in (Doc ID 1303315.1)?
    Thanks,
    Hussein

  • ITunes stops/starts songs every time certain keys are pressed, whether application is open/active or not.

    iTunes stops/starts songs whenever ENTER,"/" [num pad] or DELETE is pressed, whether the application is open/active or not.  Updated to most recent version a few days ago, though this began seemingly spontaneously today, possibly tied to an iPad sync although I really have no idea how it could have started.

    Hello Brian,
    Thank you for providing the details of the issue you are experiencing with iTunes.
    I recommend reviewing the following article to see if any third-party plug-ins could be causing the problem:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Receiving Transaction Manager

    Hi,
    We are currently on R12.0.4 and now upgrading on R12.1.3, In our Production Instance when i receive the Items no 'Receving Transaction Processor' Request runs, and i can Inspect and Deleiver the Items Quickly, where as in the Upgrade clone when i m going to receive the Items first the Receiving Transaction Processor request runs automatically and completed then i am able to inspect and Delever the Items in Inventory.
    Whats the difference in both setups. can you help?
    Regards,
    Abdul Wasi

    Abdul Wasi wrote:
    Hi,
    We are currently on R12.0.4 and now upgrading on R12.1.3, In our Production Instance when i receive the Items no 'Receving Transaction Processor' Request runs, and i can Inspect and Deleiver the Items Quickly, where as in the Upgrade clone when i m going to receive the Items first the Receiving Transaction Processor request runs automatically and completed then i am able to inspect and Delever the Items in Inventory.
    Whats the difference in both setups. can you help?
    Regards,
    Abdul WasiCheck this profile in both instance
    RCV: Processing Mode
    Mahendra

  • Ssh-agent need to start for every terminal since Yosemite

    Hi
    Since I have upgraded to Yosemite I have to manually start the ssh-agent on every new terminal/bash window/tab.
    I know I could manually start the agent in bash_profile but trying to work out what may be causing the problem...?
    Steps:
    Load terminal
    ssh-add -list
    - Could not open a connection to your authentication agent.
    ssh-add ~/.ssh/myPrivateKey
    - Could not open a connection to your authentication agent.
    ssh-agent -s
    ssh-add ~/.ssh/myPrivateKey
    ssd-add -list
    - success
    Load a new tab - rince and repeat...
    Mac Book Pro Mid 2010
    Yosemite 10.10
    Bash 4.3.30
    Thanks! 
       0         

    Bash 4.3.30
    That's not the system bash.

  • Why did the Download Manager stop blinking for new downloads?

    With 3.6 when I used to start a new download and I had more than one Firefox window open and the pages were stacked on my Win XP taskbar the Firefox tab would light up and blink when my new download started. It was easy to know when the download had actually started instead of having to go look at the download window to verify it. This is gone in 4.0. Anyway to get it back or is this just another problem with 4.0 that I have to suck up and accept? There are so many things wrong with this version!

    Please refer:
    Creative Cloud Help | Install, update, or uninstall apps
    Regards,
    Ashutosh

  • Wlan stop working for N97 Mini

    Dear Friends
    greetings;
    I've got N97 mini; when I use the wifi it shows connected but no response I can't log on any site
    I saw when I check the connection that it show message active/and after while in active and so on
    hope I found a solution
    thanx

    Another thing, I can still get the mac address from the phone by dialing *#62209526#.
    Hope this helps

  • Transaction management in stateless session beans.

    Hi all,
    I am using EJB 1.1.
    I have a statless session bean that has two methods- A and B.
    which does not involve any database interaction
    like inserting/updating/deleting the data in the database.
    The process flow is such the client always calls A first followed by the call to B.
    I have the Transaction attribute set as TX_REQUIRED at the whole bean level.
    Now my question is as follows:
    Since it is a stateless bean, ejbCreate() is called for every method's invocation.
    So does it mean that a new transaction is started for every method invocation?
    Also since a transaction ends by commit/rollback.
    The transation associated with the method A/B will never get completed as there is no commit/rollback involved in method implementation.
    So how is this transaction ended?
    Any more details about the transaction management in stateless session beans is highly appreciated.
    Any input at the earliest is highly appreciated.
    Thanks in advance.

    Since it is a stateless bean, ejbCreate() is called for every method's invocation.For stateless session bean , Create() is not delegated to the instance.
    So does it mean that a new transaction is started for every method invocation?This depends opon the Tx attribute and sequence of calls. Since you have given Tx_required then if you call any method and there is no Tx context associated with client,then a new TX will be started by container othere wise it will execute in the same TX context as the calling client. Note that client can be jsp or other ejb method.
    Also since a transaction ends by commit/rollback.
    The transation associated with the method A/B will never get completed >as there is no commit/rollback involved in method implementation.
    So how is this transaction ended?If you are using COntainer managed TX then Transaction handling like starting , ending etc is handled by the container. You need not worry about that.
    Any more details about the transaction management in stateless session >beans is highly appreciated.
    Any input at the earliest is highly appreciated.Some time back I had read the article on how the Transaction management done by container on IBM Site. I dont have URL , but you can search the site.
    HTH
    -Ashwani

  • Error while receiving transaction

    Hi all,
    Installed fresh 12.1.1 on AIX and upgarde it to 12.1.2. every thing running normal.
    While saving the receiving transaction in transaction after inspection, I am getting the below mentioned error in log file.
    RVTTH-010: Subroutine rvtthins() returned error
    Cause: Subroutine rvtthins() returned an internal error.
    Action: Note this error number and the actions you are trying to perform. Contact your system administrator for assi
    RVTTH-192.rvtthins: Subroutine ORA-01403: no data found returned error
    Cause: Subroutine ORA-01403: no data found returned an internal error.
    Action: Note this error number and the actions you are trying to perform. Conta
    Concurrent program RVCTP returned error
    Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,27,
    Action: Note both this error number and the actions you are trying to perform. Contact your system admini
    RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
    Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
    Action: Note this error number and the actions you are trying to perform. Contact your syste
    RVTBM-120: Subroutine rvtptcontrol() returned error
    workaround:
    bounced whole application.
    bounce individualy Receiving Transaction Manager
    flush shared_pool
    While doing anyone of the above three solve the problem temporary but after some time again same error.
    dig metalink but no luck......
    Please suggest what could be the possible couse.
    Thanks in ADV

    Hi Helios,
    Thanks 4 reply.
    No I did'nt resize my shared_pool.
    current size is
    SQL> sho parameter shared_pool
    NAME TYPE VALUE
    shared_pool_reserved_size big integer 500M
    shared_pool_size big integer 4608M
    please suggest

  • Enterprise Manager Not starting in Oracle10g

    Hi,
    I have Oracle10gR2 database in Windows Server 2003.
    After installing the database,Enterprise manager was working fine.
    Then i installed the patch set 10.2.4.0 for the database.
    The patch set was installed properly and the database started.
    But when i tried to open the Enterprise Manager,it will get open.
    After 5 mins, again if i try to open Enterprise manager,it says page cannot be displayed.
    I checked the service of Enterprise Manager.It is in started status.And i tried restarting the ORACLE DB CONSLE Service.
    After the service restart,I tried to open Enterprise Manager.It got opened and after if i try again in 5 mins, i m getting the same problem.
    If i check the service,it is in the status of started..Again if i restart, Enterprise manager is working for 5 mins.
    SO can anyone tell whats wrong in this? Before installing the patch,Enterprise manager was working fine.
    Please help to solve this.Thanks in Advance.
    Regards,
    Prasnnaa

    Hi,
    i didnt change it...oem repository s in database itself...default location

  • Transactional Iview stop working after SP18 upgrade

    Hi SAP Expert
    We've upgraded our Portal and R/3 backend from SP16 to SP18, after that we test all existing Transactional iview, we found all transactional iview stop working for  'SAPGUI for Windows', the SAP GUI splash screens will start but never login or start the specified transaction.
    Strangely, if we changed the iview to 'SAPGUI for HTML' the SAPGUI will login fine.
    Anyone experience similar issue? Anyone know of a work around?

    Thanks Everyone,
    I am testing the iview with SAPGUI 710 patch level 11, and I tried creating a new transaction iview with all the default settings, the result is the same.
    I've logged an OSS message regarding this, haven't got the response yet. Any other suggestion?

Maybe you are looking for