Receiving Transaction Manager

Hi,
We are currently on R12.0.4 and now upgrading on R12.1.3, In our Production Instance when i receive the Items no 'Receving Transaction Processor' Request runs, and i can Inspect and Deleiver the Items Quickly, where as in the Upgrade clone when i m going to receive the Items first the Receiving Transaction Processor request runs automatically and completed then i am able to inspect and Delever the Items in Inventory.
Whats the difference in both setups. can you help?
Regards,
Abdul Wasi

Abdul Wasi wrote:
Hi,
We are currently on R12.0.4 and now upgrading on R12.1.3, In our Production Instance when i receive the Items no 'Receving Transaction Processor' Request runs, and i can Inspect and Deleiver the Items Quickly, where as in the Upgrade clone when i m going to receive the Items first the Receiving Transaction Processor request runs automatically and completed then i am able to inspect and Delever the Items in Inventory.
Whats the difference in both setups. can you help?
Regards,
Abdul WasiCheck this profile in both instance
RCV: Processing Mode
Mahendra

Similar Messages

Error while Running Receiving Transaction Manager

Hi.,
We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
we have two Receiving Transaction Manager process.
Error
"APP 00204: Concurrent manager encountered an error while running the spawned
concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"

Hello.
Have a look on MOS Doc ID 1071727.1
Octavio

Receiving Transaction Manager Time out in iProcurement Receiving!

Hi All,
Database:10.2.0.4.0
Oracle Aps:12.0.6
O/S:AIX 64 bits 5.3 L
We are unable to create any receipts due to following error.Checked Receiving Transaction Manager and that is running fine.
Error Message
Your receipt could not be created successfully because your receiving transaction manager timed out.
Please contact your System Administrator for further assistance.
Steps To Reproduce
The issue can be reproduced at will with the following steps:
1. In Iprocurement select requisition to receive
2. Enter required data and press submit
3. on screen receive Items: review and submit get above error message
Profile RCV: Processing Mode is currently set to 'online'
Could anyone please share resolution to such an issue faced before.
Thanks for your time!
Regards,

Follow the Metalink ID: 375152.1

Receiving Transaction Manager Errors out

I am getting this meesage whle doing Inter-Org transfer that Receiving Transaction Manager as errored out. There is no error code displayed or similar.
Any thoughts where I can find the log/details of this error?
Thx

Please see the solution in (PODAMGR And RCVOLTM Inactive And Cannot Be Started (Doc ID 726158.1)).
Are there any errors in the database log file?
If the above didn't help, please run cmclean.sql and ccm.sql scripts.
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1)
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues (Doc ID 171855.1)
Thanks,
Hussein

Receiving Transaction Manager concurrent program errors out with INACTIVE, NO Manager

Hi,
We have an R12.1.3, 2-node (1 node Apps, 1 node DB) ERP system on Sparc 64, Solaris 10 Machines.
All the concurrent managers including Standard Manager and Receiving Transaction Manager are running fine.
When we are running the concurrent program Receiving Transaction Manager(RCVTPO), it errors out with Inactive No Manager error.
I am not being able to find any errors in the log files of CM or DB.
Could someone help me resolve this error. Its kinda urgent
Thanks.
Muneer

Please see the solution in (PODAMGR And RCVOLTM Inactive And Cannot Be Started (Doc ID 726158.1)).
Are there any errors in the database log file?
If the above didn't help, please run cmclean.sql and ccm.sql scripts.
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables (Doc ID 134007.1)
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues (Doc ID 171855.1)
Thanks,
Hussein

Con. Req. 'Receiving Transaction Manager' Inactive/No Manager : This request is an unconstrained request. (queue_method_code = I) , No concurrent manager is defined to process this request, so it cannot be processed.

Hi Gurus,
I need your help on a concurrent request ( Receiving Transaction Manager ) showing as Inactive/No Manager.
EBS: R12.1.2 on Linux
Database: 11.2.0.3 on HP UX Itanium
A user is submitting the concurrent request - "Receiving Transaction Manager" (It is a concurrent program not a concurrent manager). The request ends up as Inactive/No Manager. When I click on the diagnostics button this is what it shows -
"No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules."
I ran analyzereq.sql and the analysis is
Analysis:
Request 1427025 is in phase "Pending" with status " Normal".
                           (phase_code = P)   (status_code = I)
This request is an unconstrained request. (queue_method_code = I)
It is in a "Pending/Normal" status, ready
to be run by the next available manager.
Checking managers available to run this request...
There is no manager defined that can run this request
This should show on the form as Inactive/No Manager
Check the specialization rules for each
manager to make sure they are defined correctly.
Additional information (from apps.FND_CONC.DIAGNOSE):
No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules.
I ran another SQL to find out which manager runs the program :
select CONTROLLING_MANAGER,request_id
from fnd_concurrent_requests
where request_id=1427025;
It returned blank (or) NULL for controlling Manager.
select b.USER_CONCURRENT_QUEUE_NAME from fnd_concurrent_processes a,
fnd_concurrent_queues_vl b, fnd_concurrent_requests c
where a.CONCURRENT_QUEUE_ID = b.CONCURRENT_QUEUE_ID
and    a.CONCURRENT_PROCESS_ID = c.controlling_manager
and    c.request_id = 1427025;
Returned Nothing.
I thought that for a concurrent program when no specific manager is defined, Standard Manager is the default. Is my understanding wrong ?? Have anyone of you faced this issue? How did you fix it ?
I did check the profile - Concurrent: Conflict Domain for the responsibility and it is blank.
Appreciate any help.
Thanks
Cherrish Vaidiyan

Was this working before? If yes, any changes been done recently?
Your understanding is correct, unless this concurrent program is excluded from being processed by standard manager.
If the request was not processed then the no rows output is an expected behavior -- (Doc ID 344011.1)
Have you tried the solution in (Doc ID 1303315.1)?
Thanks,
Hussein

Receiving Transaction Manager stop & start for every 1 min

Hi Gurus,
Current Setup:
Ebiz instance is multinode setup
DB - 2 node RAC
CP - 2 node - PCP (DB and CP are same server but OS login different)
W&F - 2 node - Load Balanced
iRec - 1 node
Ebiz version : 12.1.3 and db is 11GR2
Issue: Receiving Transaction Manger,PO Document Approval Manager and INV Remote Procedure Manager are deactivated automatically and start by itself for every 1 min., rest other managers are up and running,
pls help , thanks in advance
Edited by: 929510 on Apr 23, 2012 4:31 PM

Issue: Receiving Transaction Manger,PO Document Approval Manager and INV Remote Procedure Manager are deactivated automatically and start by itself for every 1 min., rest other managers are up and running, Was this working before? If yes, any changes been done recently?
Can you find any errors in the CM/DB log files?
Please run these scripts.
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues [ID 171855.1]
Thanks,
Hussein

Error while receiving transaction

Hi all,
Installed fresh 12.1.1 on AIX and upgarde it to 12.1.2. every thing running normal.
While saving the receiving transaction in transaction after inspection, I am getting the below mentioned error in log file.
RVTTH-010: Subroutine rvtthins() returned error
Cause: Subroutine rvtthins() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for assi
RVTTH-192.rvtthins: Subroutine ORA-01403: no data found returned error
Cause: Subroutine ORA-01403: no data found returned an internal error.
Action: Note this error number and the actions you are trying to perform. Conta
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,27,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your syste
RVTBM-120: Subroutine rvtptcontrol() returned error
workaround:
bounced whole application.
bounce individualy Receiving Transaction Manager
flush shared_pool
While doing anyone of the above three solve the problem temporary but after some time again same error.
dig metalink but no luck......
Please suggest what could be the possible couse.
Thanks in ADV

Hi Helios,
Thanks 4 reply.
No I did'nt resize my shared_pool.
current size is
SQL> sho parameter shared_pool
NAME TYPE VALUE
shared_pool_reserved_size big integer 500M
shared_pool_size big integer 4608M
please suggest

ESYU: R11.5.10/R12 - ROI를 이용하여 Receiving Transaction을 Correct 하는 방법1

Purpose
Oracle Inventory Management - Version: 11.5.10 to 12.0
11.5.10/11i.SCM_PF.J/11i.PRC_PF.J (and higher)에서 ROI가 지원하는 새로운
functionality를 알아본다.
-. CORRECT to DELIVER to Inventory transactions
ROI를 이용하여 Standard Purchase Order에 대한 Receiving Transaction을
Correct 할 수 있는 방법은?
Solution
아래 예제 script는 Destination Type이 'inventory'인 Purchase Order의
Devlier to Inventory Transaction을 Receiving Open Interface(ROI)를 이용하여
Correct 하는 방법을 위한 것이다.
각 script는 가장 포괄적인 사용을 위해 Lot와 Serial을 control 하는 item을 가지고
test 되었다.
각 script는 한 record 만 RCV_TRANSACTIONS_INTERFACE,
MTL_TRANSACTION_LOTS_INTERFACE, MTL_SERIAL_NUMBERS_INTERFACE
tables에 insert 할 것이다.
Following SAMPLE scripts are intended
만일 item이 단지 standard item(non lot, serial control) 이라면, record는 단지
RCV_TRANSACTIONS_INTERFACE table에만 insert 된다.
Note: 11.5.10 (or 11i.SCM_PF.J)로 upgrade 하였거나 11.5.10을 install 한 후
Enhanced Receiving Validation을 위해 Note 367396.1에 설명되어져 있는
Recommended Patches list가 적용되어져 있는지 확인해야 한다.
1) Standard Purchase Order number # 6752 생성
Inventory Item = Lot-Serial-Controlled-1
Shipment Receiving Routing = Standard Receipt
Destination Type Code = Inventory
2) Item Lot-Serial-Controlled-1은 lot/serial control item
SQL> Select mp.organization_id Org_Id, mp.organization_code Org_Code,
msi.inventory_item_id, msi.segment1, decode(to_char(msi.lot_control_code),
'2','Y',
'1','N') LOT_CONTROL,
decode(to_char(msi.serial_number_control_code),
'1','None',
'2','Predefined',
'5','Dynamic at INV receipt',
'6','Dynamic at SO issue') SERIAL_CONTROL
from mtl_system_items_b msi,mtl_parameters mp
where msi.segment1 like '&item' and msi.organization_id=mp.organization_id;
위 select 결과:
LOT_CONTROL='Y' and SERIAL_CONTROL='Dynamic at INV receipt'
inventory_item_id=169845 for item=Lot-Serial-Controlled-1
3) 수량=10에 대해 Receipt number # 7746 생성(Receive and Deliver Transactions)
item=Lot-Serial-Controlled-1
Lot Number=S246
Serial Number from SN0001 to SN0010
4) RCV_TRANSACTIONS_INTERFACE table에 insert 할 필요한 정보를 찾기 위해
아래 script를 실행한다.
SQL> Select RSH.RECEIPT_NUM ,
PH.SEGMENT1 PO_NUMBER,
RT.TRANSACTION_ID ,
RT.TRANSACTION_TYPE ,
RT.TRANSACTION_DATE ,
RT.QUANTITY ,
RT.UNIT_OF_MEASURE ,
RT.SHIPMENT_HEADER_ID ,
RT.SHIPMENT_LINE_ID ,
RT.SOURCE_DOCUMENT_CODE ,
RT.DESTINATION_TYPE_CODE ,
RT.EMPLOYEE_ID ,
RT.PARENT_TRANSACTION_ID ,
RT.PO_HEADER_ID ,
RT.PO_LINE_ID ,
PL.LINE_NUM ,
PL.ITEM_ID ,
PL.ITEM_DESCRIPTION ,
PL.UNIT_PRICE ,
RT.PO_LINE_LOCATION_ID ,
RT.PO_DISTRIBUTION_ID ,
RT.ROUTING_HEADER_ID,
RT.ROUTING_STEP_ID ,
RT.DELIVER_TO_PERSON_ID ,
RT.DELIVER_TO_LOCATION_ID ,
RT.VENDOR_ID ,
RT.VENDOR_SITE_ID ,
RT.ORGANIZATION_ID ,
RT.SUBINVENTORY ,
RT.LOCATOR_ID ,
RT.LOCATION_ID,
RSH.SHIP_TO_ORG_ID
From
RCV_TRANSACTIONS RT,
RCV_SHIPMENT_HEADERS RSH,
PO_HEADERS_ALL PH,
PO_LINES_ALL PL
Where
RSH.RECEIPT_NUM = '&RECEIPT_NUMBER'
AND PH.SEGMENT1 like '&PO_NUMBER'
AND PH.PO_HEADER_ID = PL.PO_HEADER_ID
AND RT.PO_HEADER_ID = PH.PO_HEADER_ID
AND RT.SHIPMENT_HEADER_ID = RSH.SHIPMENT_HEADER_ID;
이 script는 RECEIPT_NUM=7746, PO_NUMBER=6752에 대해 아래의 두 개
records를 return 한다.
For TRANSACTION_TYPE=RECEIVE
TRANSACTION_ID=302978
DESTINATION_TYPE_CODE=RECEIVING
PARENT_TRANSACTION_ID=-1
QUANTITY=10
UNIT_OF_MEASURE=Each
SHIPMENT_HEADER_ID=250536
SHIPMENT_LINE_ID=261490
SOURCE_DOCUMENT_CODE=PO
EMPLOYEE_ID=13706
PO_HEADER_ID=36665
PO_LINE_ID=42138
ITEM_ID=169845
PO_LINE_LOCATION_ID=76782
DELIVER_TO_PERSON_ID=null
DELIVER_TO_LOCATION_ID=null
VENDOR_ID=7927
VENDOR_SITE_ID=4724
ORG_ID=204
SUBINVENTORY=null
LOCATOR_ID=null
LOCATION_ID=204
SHIP_TO_ORG_ID=204
For TRANSACTION_TYPE=DELIVER
TRANSACTION_ID=302979
DESTINATION_TYPE_CODE=INVENTORY
QUANTITY=10
UNIT_OF_MEASURE=Each
SHIPMENT_HEADER_ID=250536
SHIPMENT_LINE_ID=261490
SOURCE_DOCUMENT_CODE=PO
EMPLOYEE_ID=13706
PARENT_TRANSACTION_ID=302978
PO_HEADER_ID=36665
PO_LINE_ID=42138
ITEM_ID=169845
PO_LINE_LOCATION_ID=76782
DELIVER_TO_PERSON_ID=13706
DELIVER_TO_LOCATION_ID=204
VENDOR_ID=7927
VENDOR_SITE_ID=4724
ORG_ID=204
SUBINVENTORY=Stores
LOCATOR_ID=null
LOCATION_ID=204
SHIP_TO_ORG_ID=204
5) Delivery transaction RCV_TRANSACTIONS.TRANSACTION_ID=302979 와
관련된 Lot/Serial 정보를 확인하기 위해 아래 script를 실행한다.ACTION_ID=302979
SQL> Select LOT_TRANSACTION_TYPE,LOT_NUM,QUANTITY
from RCV_LOT_TRANSACTIONS
where source_transaction_id=&RTtransaction_id;
SQL> Select SERIAL_TRANSACTION_TYPE,SERIAL_NUM,SHIPMENT_LINE_ID,TRANSACTION_ID,
LOT_NUM
from RCV_SERIAL_TRANSACTIONS
where source_transaction_id=&RTtransaction_id;
Script 결과로 10 records가 보여지는데 각각은 SN0001 and SN0010 사이의 serianl no를
갖는다.
예를 들어,
SERIAL_NUM=SN0005 and SERIAL_NUM=SN0006
SERIAL_TRANSACTION_TYPE=TRANSACTION
SHIPMENT_LINE_ID=261490
SOURCE_TRANSACTION_ID=302979
TRANSACTION_ID=302979
LOT_NUM=S246
CORRECT to DELIVER to INVENTORY Transaction for PURCHASE ORDER Example
1) DELIVER to INVENTORY Transaction에 대한 CORRECT record를 ROI를 이용해
insert 한다.(RCV_TRANSACTIONS.TRANSACTION_ID=302979)
Delivered 된 수량을 10에서 8로 correct, SERIAL_NUM=SN0005 and SERIAL_NUM=SN0006
와 LOT_NUM=S246를 correct 한다.
Insert:
-. RCV_TRANSACTIONS_INTERFACE, MTL_TRANSACTION_LOTS_INTERFACE,
MTL_SERIAL_NUMBERS_INTERFACE tables에 1 record 씩 insert
SQL> INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
QUANTITY,
UNIT_OF_MEASURE,
ITEM_ID,
EMPLOYEE_ID,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
RECEIPT_SOURCE_CODE,
VENDOR_ID,
FROM_ORGANIZATION_ID,
FROM_SUBINVENTORY,
FROM_LOCATOR_ID,
SOURCE_DOCUMENT_CODE,
PARENT_TRANSACTION_ID,
PO_HEADER_ID,
PO_LINE_ID,
PO_LINE_LOCATION_ID,
PO_DISTRIBUTION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
VALIDATION_FLAG
VALUES
(rcv_transactions_interface_s.nextval, --INTERFACE_TRANSACTION_ID
rcv_interface_groups_s.nextval, --GROUP_ID
SYSDATE, --LAST_UPDATE_DATE
0, --LAST_UPDATE_BY
SYSDATE, --CREATION_DATE
0, --CREATED_BY
0, --LAST_UPDATE_LOGIN
'CORRECT', --TRANSACTION_TYPE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
-2, --QUANTITY
'Each', --UNIT_OF_MEASURE
169845, --ITEM_ID
13706, --EMPLOYEE_ID
250536, --SHIPMENT_HEADER_ID
261490, --SHIPMENT_LINE_ID
'VENDOR', --RECEIPT_SOURCE_CODE
7927, --VENDOR_ID
204, --FROM_ORGANIZATION_ID
'Stores', --FROM_SUBINVENTORY
null, --FROM_LOCATOR_ID
'PO', --SOURCE_DOCUMENT_CODE
302979, --PARENT_TRANSACTION_ID
36665, --PO_HEADER_ID
42138, --PO_LINE_ID
76782, --PO_LINE_LOCATION_ID
78674, --PO_DISTRIBUTION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
13706, --DELIVER_TO_PERSON_ID
204, --LOCATION_ID
204, --DELIVER_TO_LOCATION_ID
'Y' --Validation_flag
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE
( TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
LOT_NUMBER,
TRANSACTION_QUANTITY,
PRIMARY_QUANTITY,
SERIAL_TRANSACTION_TEMP_ID,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID
VALUES
( MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL,--TRANSACTION_INTERFACE_ID
SYSDATE, --LAST_UPDATE_DATE
0, --LAST_UPDATED_BY
SYSDATE, --CREATION_DATE
0, --CREATED_BY
0, --LAST_UPDATE_LOGIN
'S246', --LOT_NUMBER
2, --TRANSACTION_QUANTITY
2, --PRIMARY_QUANTITY
MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL, --SERIAL_TRANSACTION_TEMP_ID
'RCV', --PRODUCT_CODE
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL --PRODUCT_TRANSACTION_ID
INSERT INTO MTL_SERIAL_NUMBERS_INTERFACE
( TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
FM_SERIAL_NUMBER,
TO_SERIAL_NUMBER,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID)
VALUES
(MTL_MATERIAL_TRANSACTIONS_S.CURRVAL,--TRANSACTION_INTERFACE_ID
SYSDATE, --LAST_UPDATE_DATE
0, --LAST_UPDATED_BY
SYSDATE, --CREATION_DATE
0, --CREATED_BY
0, --LAST_UPDATE_LOGIN
'SN0005', --FM_SERIAL_NUMBER
'SN0006', --TO_SERIAL_NUMBER
'RCV', --PRODUCT_CODE
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL --PRODUCT_TRANSACTION_ID
Commit;
2) Data가 제대로 insert 되었는지 확인을 위해 아래 scripts를 실행한다.
SQL> Select * from RCV_TRANSACTIONS_INTERFACE where PO_HEADER_ID=36665
INTERFACE_TRANSACTION_ID=232850
GROUP_ID=25057
TRANSACTION_TYPE=CORRECT
QUANTITY=-2
PARENT_TRANSACTION_ID=302979
DESTINATION_TYPE_CODE=INVENTORY
RECEIPT_SOURCE_CODE=VENDOR
SOURCE_DOCUMENT_CODE=PO
SQL> Select * from MTL_TRANSACTION_LOTS_INTERFACE
where PRODUCT_TRANSACTION_ID=&interface_txn_id;
TRANSACTION_INTERFACE_ID=11300777
LOT_NUMBER=S246
TRANSACTION_QUANTITY=2
NoteIMARY_QUANTITY=2
SERIAL_TRANSACTION_TEMP_ID=11300777
NoteODUCT_TRANSACTION_ID=232850
SQL> Select * from MTL_SERIAL_NUMBERS_INTERFACE
where PRODUCT_TRANSACTION_ID=&interface_txn_id;
TRANSACTION_INTERFACE_ID=11300777
NoteODUCT_TRANSACTION_ID=232850
FM_SERIAL_NUMBER=SN0005
TO_SERIAL_NUMBER=SN0006
3) Purchasing Responsibility에서 특정 Group ID(GROUP_ID=25057)에 대해
'Receiving Transaction Processor'를 실행한다.
4) Navigate to Receiving / Receiving Transactions Summary
PO 6752에 대해 Receipt Number 7746 가 Receive, Delivery, Correct to Inventory
transactions이 발생했는지 확인한다.
SQL> Select * from RCV_TRANSACTIONS where PO_HEADER_ID=36665
It returns 3 records
For TRANSACTION_TYPE=RECEIVE
TRANSACTION_ID=302978
DESTINATION_TYPE_CODE=RECEIVING
PARENT_TRANSACTION_ID=-1
QUANTITY=10
For TRANSACTION_TYPE=DELIVER
TRANSACTION_ID=302979
DESTINATION_TYPE_CODE=INVENTORY
PARENT_TRANSACTION_ID=302978
QUANTITY=10
For TRANSACTION_TYPE=CORRECT
TRANSACTION_ID=302982
DESTINATION_TYPE_CODE=INVENTORY
PARENT_TRANSACTION_ID=302979
QUANTITY=-2
FROM_SUBINVENTORY=Stores
5) Navigate to Purchase Orders/Purchase Orders Summary
Shipment, Distribution level에서 PO Number 6752에 대해 아래 수량을
확인한다.
Quantity Received=10
Quantity Delivered=8
Reference
Note 335699.1

Error in Receiving Transaction Processor concurrent program

Hi all,i am trying to insert data into rcv_headers_interface and rcv_transactions_interface.So,for this data to get populated in rcv_shipment_headers and rcv_shipment_lines i am running Receiving Transaction Processor concurrent program in purchasing super user.But,this concurrent program gives below error
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:05
+---------------------------------------------------------------------------+
Concurrent program RVCTP returned error
Cause:        RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,81,
Action:        Note both this error number and the actions you are trying to perform. Contact your system administr
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause:        Subroutine rvtbm_batch_mngr() returned an internal error.
Action:        Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause:        A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action:        Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:10
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
{code}
Can someone kindly explain me what's really going why coz i am new to this Applications.
Thanks in advance!!

There are several notes on metalink for "RVTBM-007: Subroutine rvtbm_batch_mngr() returned error".
Take a look at those.
Also if you are using dual uoms, make sure that setup and conversion is setup correctly.
Hope this helps,
Sandeep Gandhi

Transaction Management in JMS adapter

Hi,
I am creating a BPEL process for inserting data in a JMS queue (for producing message on queue) with transaction management, and came across the property "isTransacted", can anyone please help me with the functionality of this property, and how to handle transactions with JMS Queue.
Thanks.

First of all the JMS specification does not define the behavior for multiple clients accessing a queue. Having said that, most vendors do offer this. Since it is not defined in the specification mileage can vary from provider to provider. However, most vendors do the obvious/intuitive thing.
When a client receives a message from a queue it is not available to anyone else until the final disposition of that message can be determined. Acknowledge and commit permanently remove the message from the queue. Recover and rollback put the message back in the queue. The death of the client results in a recover or rollback. When a message goes back to the queue, it is made available to all clients who are waiting (possibly even the same client (except in the case of the dead client)).
With respect to your questions, the intuitive behaviors are:
1) message goes back and someone else has a chance to get it
2) If you have a transacted session then the acknowledge is simply ignored, and since you didn't call commit, the message is still considered outstanding (and no one else can get it). If the session is not transacted then the acknowledge causes the message to be permanently removed from the destination (and no one else can get it).
3) if the session is transacted then the commit permanently removes the message from the destination (and no one else can get it). if the session is not transacted then the commit must throw an exception and since you didn't call acknowledge, the message is still considered outstanding (and no one else can get it).
Client2 could only receive the same message if client1 rolledback or recovered the message (which should occur if client1 dies).
_sjz.

RVCTP module: Receiving Transaction Processor

Hi,
I am doing receipt using by passing ASN no as input parameter, not picking the records from interface tables.
when i checked in rcv_transactions_interface table proceeing_status_code is "RUNNING" , "PENDING" .
when i run the Receiving Transaction Processor got below error.
i changed profile option as "BATCH", still getting same error
please help to solve this
Purchasing: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 16-NOV-2010 13:05:39
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,122227,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
RVTLO-005: ORA-01403: no data found
Cause: A SQL error has occurred in RVTLO. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 16-NOV-2010 13:05:40
Executing request completion options...

Hi Sandeep,
thanks for your reply,
i am inserting the records using below script.
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID
          ,GROUP_ID
          ,PROCESSING_STATUS_CODE
          ,RECEIPT_SOURCE_CODE
,TRANSACTION_TYPE
-- ,RECEIPT_HEADER_ID
          ,LAST_UPDATE_DATE
          ,LAST_UPDATED_BY
          ,LAST_UPDATE_LOGIN
          ,CREATION_DATE
          ,CREATED_BY
          ,VENDOR_ID
,VENDOR_SITE_ID
          ,VALIDATION_FLAG
          ,ATTRIBUTE12
          -- ,SHIPMENT_NUM
          ,EMPLOYEE_ID
          ,BILL_OF_LADING
          ,PACKING_SLIP
          ,NUM_OF_CONTAINERS
          ,GROSS_WEIGHT
          ,GROSS_WEIGHT_UOM_CODE
          ,WAYBILL_AIRBILL_NUM
          ,COMMENTS
          ,FREIGHT_TERMS
          ,INVOICE_NUM
          ,INVOICE_DATE
          ,ATTRIBUTE1
          ,ATTRIBUTE2
          ,ATTRIBUTE3
          ,ATTRIBUTE4
          ,ATTRIBUTE6
          ,ATTRIBUTE7
          ,ATTRIBUTE8
          ,ATTRIBUTE9
          ,ATTRIBUTE10
          ,ATTRIBUTE11
,SHIPPED_DATE
,EXPECTED_RECEIPT_DATE
-- ,RECEIPT_NUM
     VALUES(l_header_interface_id
     ,l_group_id
          ,'BATCH' --'PENDING'
          ,'VENDOR'
          ,'NEW' --'RECEIVE'
-- ,H.SHIPMENT_HEADER_ID
          ,sysdate
          ,l_user_id
          ,l_login_id
,H.CREATION_DATE
,H.CREATED_BY
          ,H.VENDOR_ID
,H.VENDOR_SITE_ID
          ,'Y'
          ,H.ATTRIBUTE12
          -- ,l_sil_number
          ,H.EMPLOYEE_ID
          ,H.BILL_OF_LADING
          ,H.PACKING_SLIP
          ,H.NUM_OF_CONTAINERS
          ,H.GROSS_WEIGHT
          ,H.GROSS_WEIGHT_UOM_CODE
          ,H.WAYBILL_AIRBILL_NUM
          ,H.COMMENTS
          ,H.FREIGHT_TERMS
          ,H.INVOICE_NUM
          ,H.INVOICE_DATE
          ,H.ATTRIBUTE1
          ,H.ATTRIBUTE2
          ,H.ATTRIBUTE3
          ,H.ATTRIBUTE4
          ,H.ATTRIBUTE6
          ,H.ATTRIBUTE7
          ,H.ATTRIBUTE8
          ,H.ATTRIBUTE9
          ,H.ATTRIBUTE10
          ,H.ATTRIBUTE11
,H.SHIPPED_DATE
,sysdate
-- ,11111111
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID
,GROUP_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,CREATION_DATE
,CREATED_BY
,LAST_UPDATE_LOGIN
,TRANSACTION_TYPE
,TRANSACTION_DATE
,PROCESSING_STATUS_CODE
,PROCESSING_MODE_CODE
,TRANSACTION_STATUS_CODE
,QUANTITY
,UNIT_OF_MEASURE
,ITEM_ID
,UOM_CODE
,INTERFACE_SOURCE_CODE
,SHIPMENT_HEADER_ID
-- ,SHIPMENT_LINE_ID
--,USER_ENTERED_FLAG
,SOURCE_DOCUMENT_CODE
,DESTINATION_TYPE_CODE
,PRIMARY_QUANTITY
,PRIMARY_UNIT_OF_MEASURE
,RECEIPT_SOURCE_CODE
,EMPLOYEE_ID
,PARENT_TRANSACTION_ID
,PO_HEADER_ID
,PO_RELEASE_ID
,PO_LINE_ID
,PO_LINE_LOCATION_ID
,PO_DISTRIBUTION_ID
--,PO_REVISION_NUM
,PO_UNIT_PRICE
,CURRENCY_CODE
,CURRENCY_CONVERSION_TYPE
,CURRENCY_CONVERSION_RATE
,CURRENCY_CONVERSION_DATE
,VENDOR_ID
,VENDOR_SITE_ID
,TO_ORGANIZATION_ID
,LOCATOR_ID
,SHIP_TO_LOCATION_CODE
-- ,AUTO_TRANSACT_CODE
,VALIDATION_FLAG
VALUES
l_transaction_id
,l_group_id
,sysdate
,l_user_id
,sysdate
,l_user_id
,l_login_id
,'RECEIVE'
,sysdate
,'PENDING'
,'BATCH'
,'PENDING'
,r.QUANTITY_SHIPPED
,r.UNIT_OF_MEASURE
,r.ITEM_ID
,l_uom_code--UOM_CODE
,'RCV'
,l_header_interface_id --r.SHIPMENT_HEADER_ID
-- ,r.SHIPMENT_LINE_ID
-- ,'Y' --USER_ENTERED_FLAG
,'PO' --SOURCE_DOCUMENT_CODE
,'RECEIVING' -- DESTINATION_TYPE_CODE
,r.QUANTITY_SHIPPED --PRIMARY_QUANTITY
,r.PRIMARY_UNIT_OF_MEASURE --PRIMARY_UNIT_OF_MEASURE
,'VENDOR' -- RECEIPT_SOURCE_CODE -
,r.EMPLOYEE_ID --EMPLOYEE_ID
,-1 --PARENT_TRANSACTION_ID    -
,r.PO_HEADER_ID
,r.PO_RELEASE_ID
,r.PO_LINE_ID
,r.PO_LINE_LOCATION_ID
,r.PO_DISTRIBUTION_ID
--,r.PO_REVISION_NUM
,r.UNIT_PRICE --PO_UNIT_PRICE
,r.CURRENCY_CODE
,r.RATE_TYPE -- CURRENCY_CONVERSION_TYPE -
,r.RATE -- CURRENCY_CONVERSION_RATE
,r.RATE_DATE -- CURRENCY_CONVERSION_DATE
,r.VENDOR_ID
,r.VENDOR_SITE_ID
,r.TO_ORGANIZATION_ID --ORGANIZATION_ID
,41
,'GNE JEBEL ALI'
-- ,'DELIVER'
,'Y'
can you plz suggest if i am wrong

'Receiving Transaction Processor' ERRORS

Hi All,
While Running the Seeded Program 'Receiving Transaction Processor', I am getting the following Errors:
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,69604,
Action: Note both this error number and the actions you are trying to perform. Contact your system adminis
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Please help out..,
many thanks......

Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist

Receiving Transaction Processor ERROR

Hello Experts,
Greetings!
I have inserted data into rcv_headers_interface and rcv_transactions_interface to import the PO receipts into the RCV base tables. After executing 'Receiving Transaction Processor' , I am getting below given error , unable to get the trace of this Issue. Please help me in understanding this.
My requirement is to load the PO receipts from the external system into oracle database. Please help me with any piece of information you have.
===================ERROR==============
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,41688,,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause: A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Thank you.
Best regards,
S.Jain.

See if you have data in po_interface_errors for that transaction

Receiving transaction error

Experts,
I am getting this error when running the Receiving transaction program
Concurrent program RVCTP returned error Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,728835, Action: Note both this error number and the actions you are trying to perform. Contact your system ad RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error Cause: Subroutine rvtbm_immediate_mngr() returned an internal error. Action: Note this error number and the actions you are trying to perform. Contact your syste RVTBM-120: Subroutine rvtptcontrol() returned error Cause: Subroutine rvtptcontrol() returned an internal error. Action: Note this error number and the actions you are trying to perform. Contact your system administrator Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure. Contact your support representative
help me to resolve this ASAP
thanks,
baskar.l

the above is log file by setting the processing mode to online.
Here is the log file by setting the processing mode to batch.
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 22-APR-2008 20:09:01
RVTTH-010: Subroutine rvtthins() returned error
Cause: Subroutine rvtthins() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for assi
RVTTH-190: ORA-01861: literal does not match format string
ORA-06512: at "APPS.JA
Cause: A SQL error has occurred in RVTTH. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
RVTTH-010: Subroutine rvtthins() returned error
Cause: Subroutine rvtthins() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for assi
RVTTH-190: ORA-01861: literal does not match format string
ORA-06512: at "APPS.JA
Cause: A SQL error has occurred in RVTTH. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,
Action: Note both this error number and the actions you are trying to perform. Contact your system administrato
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 22-APR-2008 20:09:22
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
thanks,
baskar.l

Receiving Transaction Manager

Similar Messages

Maybe you are looking for