Receiving Transaction Processor fails with multiple distribution lines

Hi All,
I am having a problem with 'Receiving Transaction Processor' when receiving is done against a multiple distributions line that has different project, task data. The concurrent program 'Receiving Transaction Processor' completes normally but when you check the quantity_received in po_line_locations_all table it shows partial quantity received.
example:
PO# Test_PO1
Line#1, Shipment#10001, Dist#101, Quantity Ordered: 1, Amount $1000 (Dollar based line), Project_ID: 335803, Task_ID: 12057618
Line#2, Shipment#20001, Dist#101, Quantity Ordered: 3, Amount $750, Unit Price: $250, Project_ID: 335803, Task_ID: 12057618
Line#2, Shipment#20001, Dist#102, Quantity Ordered: 2, Amount $500, Unit Price: $250, Project_ID: 336488, Task_ID: 12121488
Receiving performed using 'Receiving Transaction Processor' by populating data in RCV_Transactions_Interface and RCV_Headers_Interface tables and it gave following error for one of the distribution
from po_interface_errors table.
Line#1, Shipment#10001, Dist#101, Received Amount $400 (Successfully interfaced)
Line#2, Shipment#20001, Dist#101, Quantity Received: 1 (Successfully interfaced)
Line#2, Shipment#20001, Dist#102, Quantity Received: 1 (Failed with below error)
Error_Message: Error: The PROJECT_ID specified is invalid. The value specified (336804) does not match the expected value (335803).
Interface_Type: RCV-856
Error_Message_Name: RCV_INVALID_ROI_VALUE
Table Name: RCV_HEADERS_INTERFACE
Note: This happens only when you have different project_id and task_id values on each distribution for Line#2, Shipment#20001
Please let me know if someone have already came across this issue or if there is already any patch for this issue.
Any help with this issue is appreciated.
Thanks,
Sri

Hi,
Probably, if you put this under SCM - Discrete Manufacturing, your question could solicit more replies..
Rgds,
Rakesh

Similar Messages

'Receiving Transaction Processor' ends with error. Receipt not saved.

Trying to make receipt. On header done add to receipt. When the receipt is selected and saved. & then tried to open receving transaction. Receipt NOT found also 'Receiving Transaction Processor' ends with error.
Plz Suggest soluntion.
Regds
9999

When we do receipts then atomatically receiving transaction process runs. On header of receipt there is add to receipt oprtion. User adding in erliar made receipt. But when done add to receipt transction get saved but this receipt number not able to find in receiving transaction.
Now kindly help..!!!
9999

Receiving Transaction Processor runs even if processing mode is ON-LINE

Hi All,
We have a problem with receiving. The profile option RCV: Processing Mode is set to ON-LINE at site level. We observed that the Receiving Transaction Processor is running for a bunch of transactions with IMMEDIATE processing mode.
We checked the responsibility level and user level profile options too and nothing is set. only at site level we have that profile option set to ON-LINE.
What could be the reason for this Transaction Processor to run???
Please let us know.
Thanks,
Prathima

How are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?

Issue with the Receiving Transaction Processor Standard Program

We are facing issue in the Receiving Transaction Processor Standard Program.
The error description is as below:
RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator.
RVTII-077: ORA-01476: divisor is equal to zero
Cause: A SQL error has occurred in RVTII. The SQL error is &LSQL_ERR.
if any once faced this issue earlier and any solution, Please let us know.
Regards,
Krishna

Please see if these docs help.
RMA Receipt Errors With RVTII:077 OE COGS API Returned Error Warehouse NULL [ID 301767.1]
RCVRCERC: RVTII-077: ORA-0146: divisor is equal to zero [ID 1287907.1]
Cost Of Goods Sold Account Generation Failed With Error [ID 406035.1]
RMA Transaction Issues (Troubleshooting) [ID 311208.1]
Thanks,
Hussein

Receiving Transaction processor with Receipt Traveller Concurrent program

Hi
We have customized Receipt Traveller Concurrent program (Customized) to get rich Publiishing features using BI Publisher Reports technology.
For some receipts we are getting blank page, on observation we noticed that When Receipt Traveller Concurrent program is complete earlier than Receiving
Transaction processor then we are getting blank pages for receipt program, Where as if Receitp Traveller concurrent Program is getting completed after
Receiving Transaction processor completion then we don't have issue of blank page.
As a possible solution we have tried to make Receiving Transaction processor Incompatible to Receipt Traveller Concurrent program but still issue remains.
Would like to know if any hint on fixing for this.
Thanks
Kamalakar.G

Your Traveler program may need some data that is generated by the transaction processor.
Try setting "RCV: Processing Mode" profile option to On-line; logout and log back in.
See if the problem goes away.
But keep in mind that if set to on-line, the users have to wait (a second or more) till the receipt is processed. Depending on your volume and response times, this may not be acceptable.
Hope this helps,
Sandeep Gandhi

RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction P

RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction Processor)
Hi
I have a receipt_num 1234 that has 14 lines in it ( from 29-46) and the po_number is 454545.
When I load the receipt with the receiving trans process a recipt get created for all lines except for 1.
This particular line which is 46 is still in the rcv_transactions_interface table as an error, when Update this table and SET processing_status_code = 'PENDING',
transaction_status_code = 'PENDING' and rerun the program it's does not load the data and it complete with a warning and when I look at the po_interface_errors I see this(RCV_TP_INVALID_DEST_TYPE). and put the processing_status_code = 'COMPLETED'and transaction_status_code = 'ERROR'.
Please help please help
null

RCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi

Receiving Transaction Processor updates in rcv_transactions_interface

Hi,
We use an legacy inventory system to receive lots. Once received a custom program puts the records into rcv_transactions_interface table for interfacing and calls the Receiving Transaction Processor. Now, the Receiving Transaction Processor updates the rcv_transactions_interface with error. The error in po_interface_errors table is
The item id (NUMBER = **********) does not match the item_id in the Purchase Order.
But the item in present in the Purchase order which I have mentioned. Please help me in finding out the resolution for this issue.
Thanks

Can you do this and let us know the results?
1. Change the Proflle value for RCV: Processing Mode to Batch
2. Change the profile value for RCV: Debug Mode to Yes
3. Perform transaction
4. Run Receiving Transaction Processor
5. Check the log file at the bottom.
6. If you can send the log file,. we can assist.
Also as a clue this error looks like is coming back from Inventory. Please check whether the item controls are correctly setup and item attributes are enabled correctly. Your code combinations are all still enabled that are used in the po distributions and so on.
Thanks
Nagamohan

Error occured when running the "Receiving Transaction Processor"

Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因：RVCTP 遇到内部错误。参数：RVCTP,BATCH,,,
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007：子例行程序 rvtbm_batch_mngr() 返回的错误
原因：子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以
RVTBM-080：子例行程序 rvtptcontrol() 返回的错误
原因：子例行程序 rvtptcontrol() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮
RVTLO-050：ORA-01403: 未找到任何数据
原因：在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时，并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP，以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件，因为：
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex Liu

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

Urgent Please - Receiving Transaction Processor Issue

Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);

Pl see you duplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support
Srini

Urgent Please - Receiving Transaction Processor

Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);

Pl see your triplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support.
Srini

Validations done by Receiving transaction processor

I'm writing a custom program to receive an EDI 856(ASN) file and populating the data in the rcv interface tables for the Receiving transaction processor to run and create receipts for PO receiving.
Before populating the data from the file into rcv interface tables, I would like to do the same validations which the RCVTP would do.
Is there an API which can be used to do these validations?
Does someone have the list of validations that can be performed so that RCVTP doesn't fail in validations later?
Or is there a document which gives the list of all possible errors that can be found in po_interface_errors table.
We are on 11.5.10.2
Please help.
Thanks
Sandeep

Hi,
Please review the following docs and see if it helps you :
How To Diagnose An Issue in ROI Receiving Open Interface in 11.5.10 / R12 PO / IOT / Req / RMA (Doc ID 564723.1)
FAQ: Purchasing Documents Open Interface (Doc ID 224031.1)
Thanks &
Best Regards,

India - Receiving Transaction Processor program completing in Error status

Hi All
We are getting below error message in program "India - Receiving Transaction Processor". We are on R12.1.3 version.
*** List of Transactions whose processing is skipped due to the below errors ***
Transaction_id->5002 Error Message->Error in Line Number 1 - jai_rgm_claims_pkg.get_term_id => Location ID cannot be NULL
Please suggest the solution.
Thanks
Ganesh

Hi,
The reason for the exception is we don't have any data in the file to zip. If you are sending xml data to the data definition check the path in select clause in bursting control file.
Regards,
Raavi

Please help on if anyone run the receiving transaction processor in online/immediate mode

Hi All,
Can anybody pl let me know how to run the receiving trx processor in online/immediate mode??
Regards
Harry !!

Hi Harry,
System Profile "RCV: Processing Mode" decides the processing mode for receiving transactions, it can be either in "Batch", "Immediate" or "On-line" modes. It is reflected in RCV_TRANSACTIONS_INTERFACE.PROCESSING_MODE_CODE field.
Please refer:
https://forums.oracle.com/thread/2513499
Also have a look at:
Forum Search: Receiving Transaction Processor
Best Regards,

Receiving Transaction Processor

Hi,
I have inserted the data in RCV_headers_interface and
RCV_transaction_interface and run the Receiving Transaction Processor program, no error in log file.
The PROCESSING_STATUS_CODE column in the rcv_transactions_interface is updated as ' ERROR'.
when I check for the error in po_interface_errors
column_name: INTERFACE_TRANSACTION_ID
error_message:An error occurred while trying to split lot and serial lines.
error_message_name:RCV_SPLIT_LOT_SERIAL_ERROR
table_name:RCV_TRANSACTIONS_INTERFACE
I have populated UOM_CODE in rcv_transactions_interface and Items are not lot or serial controlled.
Can anyone please advise
Thanks

Hi,
Thanks for replay
I am not passing values for use_mtl_lot and use_mtl_serial columns
Here is the script I used.
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPPED_DATE,
VENDOR_NAME, -- or VENDOR_ID
EMPLOYEE_NAME, -- or EMPLOYEE_ID
VALIDATION_FLAG,
SHIP_TO_ORGANIZATION_CODE, -- or SHIP_TO_ORGANIZATION_ID
EXPECTED_RECEIPT_DATE
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL,
RCV_INTERFACE_GROUPS_S.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
sysdate,
1,
1,
sysdate,
1,
sysdate,
'&vendor_name',--or vendor_id
'&agent_id', -- or agent_id
'Y',
organization_id
sysdate+5
FROM DUAL;
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
HEADER_INTERFACE_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
QUANTITY,
UNIT_OF_MEASURE,
AUTO_TRANSACT_CODE,
RECEIPT_SOURCE_CODE,
SOURCE_DOCUMENT_CODE,
DOCUMENT_NUM, -- or PO_HEADER_ID
RELEASE_NUM, -- or PO_RELEASE_ID
DOCUMENT_LINE_NUM, -- or PO_LINE_ID
DOCUMENT_SHIPMENT_LINE_NUM, -- or PO_LINE_LOCATION_ID
SHIP_TO_LOCATION_CODE, -- or SHIP_TO_LOCATION_ID
VALIDATION_FLAG,
DELIVER_TO_LOCATION_CODE, -- or DELIVER_TO_LOCATION_ID
TO_ORGANIZATION_CODE, -- or TO_ORGANIZATION_ID
UOM_CODE,
destination_type_code,
po_distribution_id
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL,
RCV_HEADERS_INTERFACE_S.CURRVAL,
RCV_INTERFACE_GROUPS_S.CURRVAL,
SYSDATE,
1,
SYSDATE,
1,
1,
'RECEIVE',
sysdate,
'PENDING',
'BATCH',
'PENDING',
quantity, -- make sure to enter the quantity <= qty_ordered – qty_received
'EACH',
'DELIVER',
'VENDOR',
'PO',
'&po_num', -- or po_header_id
null, -- or po_release_id
po_line_id,
line_location_id
'&ship_to_location_code', -- or location_id
'Y',
&DELIVER_TO_LOCATION_ID,
&TO_ORGANIZATION_ID,
'&UOM',
'EXPENSE',
&po_distribution_id
FROM DUAL;
Thanks

Receiving transaction processor populates quantity_received = 0

Hello Everyone,
I'm populating a non-zero value into rcv_transactions_interface.quantity field. After Receiving Transaction Processor is run, a record is created in rcv_shipment_headers table and rcv_shipment_lines tables. But rcv_shipment_lines.quantity_received is popilated with 0 where as quantity_shipped is populated correctly with the value that is inserted in the interface table.
When this happens the shipment_line_status_code is 'EXPECTED' and there is no record created in rcv_transactions table.
Can any one please let me why this happens??
Thanks in Advance
Sunny.

Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist

Receiving Transaction Processor fails with multiple distribution lines

Similar Messages

Maybe you are looking for