Receiving unsolicited email notifications
As I wrote here 81., this morning I started receiving what I now see are email notifications of messages posted in that thread, starting with, and including, my own message #79. Apparently, these messages are associated with my other identity, Claudio_González, which I haven't used in two weeks.
I know I haven't asked to be notified by email of anything happening in these forums, so I would be very grateful if someone could put an end to this. If this also means removing my second identity, so much the better.
Message was edited by: Claudio González
It looks like some emails are not making it to the forums. Here are a couple of messages I sent in recently:
function(){return A.apply(null,[this].concat($A(arguments)))}
OK. So the RMID cookie sounds like the culprit here. I've passed that along to folks who should have access to the systems.
My question is how is the RMID being set? According to the Adobe.com entry for Claudio's account #2 (yesterday), he hadn't used that account in two years. Today it shows last login as today. That is expected, as I sent him the change password info for that account.
John
and
function(){return A.apply(null,[this].concat($A(arguments)))}
You definitely have two accounts in the Adobe system. An older one with a name and a newer one with an email address as the ID. You used the newer account in the FuseTalk forums, starting on Aug 1, 2006.
The more I think about it, the less I think that changing the info on the account will help. But give it a try anyway.
John
Similar Messages
-
I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?
I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??
Perhaps you should contact Facebook?
-
Users as other task owners are receiving 5 emails notification for the same task
users as other task owners are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks
The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
" Project offers two types of delays:
Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
all leveling delays by choosing Resource➝Level➝Clear Leveling.
Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
After a couple of pages;
" Leveling Resources
In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource" -
Receive duplicate email notifications
I receive duplicate messages to my Apple Discussion notifications. Any way to make the duplicates stop?
Both are to the same email address. Comparing headers shows no differences.Should have kept my mouth shut
Do you have notifications enabled for this thread? For this community? If so turn it off.
For the thread look at the top of the thread list
For the community look at the first page -
Why did I just begin to receive iCloud email notifications ...
... of changes in a shared calendar when I have not received them previously?
This shared calendar has been set up for months now and working fine. Just a few hours ago I began receiving notifications out of the blue as though that check box was ticked in the share calendar window - but it is not ticked, nor ever has been.
I've looked on the Mac that owns the calendar and the Mac that is sharing the calendar - nothing I can find...
thx in advanceThis just started happening to a lot of people. See How do you stop receiving notifications about updated calendar events?
-
Email notification not received
We have a incident that user and admin is not received the email notification to lotus notes id.other users receiving the notifications from the same application.Same user and admin receiving mails from other applications
SWI1 no error but in SOST there is no record of a mail sent.
Have checked SU01 the user has an email address maintained both in ESS and R/3.
As per config SO16 - home address is selected.
In the profile his external email id is selected as home address.
what should i check next to sort out the issue.
Please help .
Sampada .Hello Sampada,
could you tell something about the application which has this behaviour as this could be technology dependent.
As an example e-recruiting uses smartforms and sending them as e-mails requires a printer assigned to the user running the application. If a user has no printer assigned no message is send and no entry appears in SOST.
Kind regards
Roman -
Co-Authors Not Receiving eMail Notifications
I am the website manager for a custom home builder.
I have set the owner and his secretary as co-authors.
I would like them to receive email notification that a
form has been submitted.
I receive the email notification but the clients do not.
How do I set-up Forms Central so that the clients receive notification?
Thanks!This FAQ explains how:
http://forums.adobe.com/docs/DOC-1424 -
Please help with new emails. I am not receiving new email notification. I have to manually fetch all emails. I have contacted Apple several times. I have powered device all the way down, reset me.com. My me.com account works great on Mac. Please help
So all email notifications were not coming thru...from any source. Talked to another Apple text and he advised me to shut down the multitask bar at the bottom. So far so good. Seems kind of strange because the problem had only started about a month ago. I've had the phone since August
-
Stopped receiving email notifications
Dear Experts,
I'm not receiving any email notifications from the respective communities in which i have subscribed for email notifications. I cross checked the same and my email notifications are active in the communities.
Can any one let me know what might be the problem?
Thanks
KHHello Katrice,
it seems to be a larger problem, since you're not the only one. Please see and follow the thread Re: Email alerts from SCN not working anymore for me for a possible workaround by Jason and updates on the fix.
Regards,
Steffi. -
Receiving email notification UMS Adapter
Hi ,
I am using Oracle SOA Suite PS5 UMS adapter. UMS adapter is working fine while sending outbound email notifications, but the same is failing while receiving inbound email notifications, as there is no instance being created for deployed project containing UMS adapter operations type Inbound Receive Notification .
I have checked also, there is no inbound notifications being seen in Service Engine---Human Workflow-- Notification Management.
I have followed : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/
but had no luck :(
Log Trace :
oracle.fabric.common.FabricDeploymentException: [JCABinding] [UMSPROJ2.InboundEmailUMSService/2.0]Unable to complete initialization due to: Endpoint Activation Error.AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta****@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
Please correct the reported issue and redeploy the BPEL process. : Endpoint Activation Error. AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
Please correct the reported issue and redeploy the BPEL process.
{rootCauses=[]}
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry.access$3600(AdapterServiceRevisionRegistry.java:72)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
nRegistry.java:618)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.
java:444)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisio
nRegistry.java:409)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionR
egistry.java:334)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisi
onRegistry.java:140)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:102)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevi
sionChanged(AdapterService.java:347)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.p
rocessDefaultInSeries(FabricKernelInitializerServlet.java:824)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.r
un(FabricKernelInitializerServlet.java:773)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: BINDING.JCA-12517
Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.
adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
Please correct the reported issue and redeploy the BPEL process.
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
pl.endpointActivation(AdapterFrameworkImpl.java:511)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performEndpointActivation(JCAEndpointActivation.java:649)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:632)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performActivation(JCAEndpointActivation.java:386)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
nRegistry.java:593)
... 11 more
Caused by: Unable to create Endpoint.
at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResou
rceAdapter.java:195)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
pl.endpointActivation(AdapterFrameworkImpl.java:492)
... 15 more
<Dec 23, 2012 5:51:40 PM IST> <Error> <oracle.integration.platform> <SOA-20020>
<Deployment of composite "UMSPROJ2" failed: [JCABinding] [UMSPROJ2.InboundEmailUMSService/2.0]Unable to complete initialization due to: Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta**@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
Please correct the reported issue and redeploy the BPEL process.: Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.
adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to th
e following reason: Unable to create Endpoint.
Please suggest !!
Regards,
Abhinav
Edited by: Abhinav on Dec 28, 2012 9:52 AMYou can use callhome
MDS(config)# ip domain-lookup
MDS(config)# ip name-server
MDS(config)# snmp-server contact
MDS(config)# callhome
MDS(config-callhome)# email-contact <[email protected]>
MDS(config-callhome)# phone-contact
MDS(config-callhome)# streetaddress
MDS(config-callhome)# enable
MDS(config-callhome)# transport email from <[email protected]>
MDS(config-callhome)# transport email smtp-server
MDS(config-callhome)# no destination-profile short-txt-destination alert-group All
MDS(config-callhome)# destination-profile short-txt-destination alert-group Syslog-group-port
MDS(config-callhome)# destination-profile short-txt-destination email-addr <[email protected]
MDS(config-callhome)# no duplicate-message throttle
Regards,
Roman -
Not receiving email notifications of iCal event invitations from other parties.
I am not receiving emails for iCal event invitations from other parties, but the invitations ARE in my iCal Inbox. I don't use iCal often, so I never proactively go in to check my Inbox there, but rather have always depended on receiving the email notification of an event invite to know to add it to my iCal. I can SEND invitations to others successfully with other parties receiving MY email notifications, I'm just not receiving them via email.
I've now missed two very important meetings because I never received the email invitations to add an event, which were the only forms of correspondence for both. Can anyone help me? Thank you!Hello mcdannej,
While a Verizon employee may occasionally post here, this community is meant mainly for peer-to-peer support. If you need to talk to a Verizon representative, you should contact customer service directly through our Support Page or Contact Us. -
Canceled account but still receiving email notification
How can we stop FIOS emails for good? We closed our account 2 months ago (due to a move) but are still receiving general email notifications.
Any help is appreciated.
RGBHi and Welcome to the Forums!
It might be a non-email message...try this:
Homescreen > Messages > BBKey > Search
Set as follows (may vary depending on your device OS level):
Search Type: Local
Name In: Any Address Field
Subject Message: <leave blank>
Include Encrypted Messages: Yes
Service: All Services
Folder: All Folders
Show: Unopened Only
Type: All
That should return to you all unopened messages from all message conduits. Take action on whatever you see and that should clear up the counter.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Don't receive eMail Notification
Hi, I Never received any eMail notification for any of my posts when I select on "watch this thread". My eMail ID is correct, and the radio buttons for both the options are selected. I have a send eMail Immediate. What else should I do ?
Outlook is a mail client program that runs on PCs and Macs. Your email provider would be the second part of your email address, i.e. "[email protected]".
-
Cannot Send Email Notification Using Stored Procedure.
Hi Friends,
I tried to execute this job scheduler...
begin
dbms_scheduler.create_job(
job_name => 'ILMS_JOB_SCHEDULE'
,job_type => 'PLSQL_BLOCK'
,job_action => 'begin ilms.check_reminder(); end; '
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=DAILY'
,enabled => TRUE
,end_date => NULL
,comments => 'Ilms job schedule for notification.');
end;
However, since the effect is too long I rescheduled the frequency to be every one minute in this set attribute...
BEGIN
DBMS_SCHEDULER.SET_ATTRIBUTE(
name => 'ILMS_JOB_SCHEDULE'
,attribute => 'repeat_interval'
,value => 'FREQ=MINUTELY;INTERVAL=1'
DBMS_SCHEDULER.DISABLE('ILMS_JOB_SCHEDULE');
DBMS_SCHEDULER.ENABLE('ILMS_JOB_SCHEDULE');
END;
Check Reminder is the stored procedure invoked by job scheduler to check values in database columns before sending email notification to the respective recipients' email address and also the format of the email notification to be sent to the recipients...
CREATE OR REPLACE PROCEDURE check_reminder AS
NO number;
CURSOR emp_cur is
select * from pergerakan_ks where TASK_FLAG=7 and TASK_STATUS='InProgress';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
no_kes varchar2(100);
subj varchar2(4000);
kpi number;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@abc.com.my';
FOR emp_rec in emp_cur
LOOP
if emp_rec.PKS_TKH_TERIMA is null then
dbms_output.put_line('count day ' || round(sysdate - to_date(emp_rec.pks_tkh_hantar)) || crlf || crlf);
if round(sysdate - to_date(emp_rec.pks_tkh_hantar)) >3 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
dbms_output.put_line('update old pergerakan pks_id : '||emp_rec.pks_id);
update pergerakan_ks set task_status='Done' where pks_id=emp_rec.pks_id;
dbms_output.put_line('insert new pergerakan ks : ');
insert into pergerakan_ks(pks_id,pks_ks_id,pks_km_id,pks_penghantar_id,pks_tkh_hantar,
pks_penerima_id,pks_tkh_terima,task_name,task_owner,task_status,task_flag,fb_id)
values(pks_id_seq.nextval,emp_rec.pks_ks_id,emp_rec.pks_km_id,
emp_rec.pks_penghantar_id,sysdate,
null,
null,emp_rec.task_name,
emp_rec.pks_penghantar_id,
'InProgress',6,emp_rec.fb_id);
commit;
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
if emp_rec.PKS_TKH_TERIMA is not null then
dbms_output.put_line('emp_rec.pks_km_id ' || emp_rec.pks_km_id || crlf);
select c.KM_KPI into kpi from keluar_masuk_ks c where c.KM_ID = emp_rec.pks_km_id;
no := round(sysdate - to_date(emp_rec.pks_tkh_terima))-kpi;
dbms_output.put_line('count day - kpi' || no || crlf);
dbms_output.put_line('kpi ' || kpi || crlf);
if no = 1 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
if no = 3 then
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
END LOOP;
END;
E_mail_message is the stored procedure invoked by the check_reminder to tell scheduler information of the connection and the email address of the recipients...
CREATE OR REPLACE procedure
e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
I tried to execute to execute the e_mail_message procedure but received this error. Also, no notification sent to the email address...
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13
Please help so that I can receive the email notification into my email...thanks in advance for your time..user13281540 wrote:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13This is not an Oracle error - this is the mail server saying "+hey, I don't like that e-mail address you are supplying, I'm not accepting it!+".
If you look at RFC821 (Request For Comments memo 821 describes the SMTP specifications), you'll see that the sender and recipient needs to be supplied in the format +<[email protected]>+, e.g. +<[email protected]>+.
I have found that not all SMTP servers are equal in this regard. Some may insist on the brackets around the address, some may not.
You need to confirm the format of the addresses you use in the "+MAIL FROM+" and "+RCPT TO+" commands.. and ensure that these formats are accepted by your SMTP server - and if not, change your code to use an acceptable format.
The easiest way to do this is using telnet - and interacting directly and manually with the server. SMTP is a clear text protocol and easy to use manually. Try it. It is the best way to test SMTP interaction and validate the approach and SMTP commands and arguments used by your code. -
Cannot send email notification to more than one people
Hi everyone,
Hope anyone could help me to solve this. I want to send email notification to two people. First to the staff to alert him that his claim is ready. And also to his supervisor that the claim has been disbursed. Below is the PL/SQL procedure, check_claim being used..
CREATE OR REPLACE PROCEDURE TEST.check_claim AS
NO number;
CURSOR emp_cur is
select * from emp where dept=7 and status='active';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
subj varchar2(4000);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@phantom.com';
FOR emp_rec in emp_cur
LOOP
if emp_rec.claim_status ='Y' then
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email;
subj:='Claim'||emp_rec.claim_id;
mesg:='Claim No'||emp_rec.claim_id||' has been disbursed';
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
END LOOP;
END;
The first email_to is to be sent to staff_id and the second email_to is to be sent to staff_hod.
The PL/SQL procedure then called the e_mail_message procedure shown below for the connection information..
CREATE OR REPLACE procedure
TEST.e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
However, the email notification only being sent to the supervisor / head of department. The staff concerned does not receive any email notification. Please help. Thank you for your time...from wht i see
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email; -- wrongit should be
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:= email_to || ' , ' || emp_rec.staff_hod||default_email;
Maybe you are looking for
-
What is the best way to partitioning Macbook Air 13" 2012 solid state drive
What is the best way to partitioning Macbook Air 13" 2012 solid state drive.
-
Using external HD from a WinXP system with MBP - can't reformat external HD
Hi, I have an external hard drive that I've been using with my Windows XP desktop computer. Before I got my MBP a month ago, I stored my iTunes library and all my digital photos on the external HD. I'd like to use the same HD for my MBP, but I can't
-
HP wizard says he's not protected using a Linksys router
Please help: I just bought a HP laptop and when I was setting it up it asked me what kind of router do i plan on using. I clicked on the Linksys tab at the very bottom of their list and I was told that with a Linksys router I wouldnt be protected. Hu
-
GL account is appearing twice in the report
Hi Xperts, We have a report in that particular report we can see the Balances of TOTAL COST OF SALES,Total wages & salaries,Total other staff costs,Total designing & merchantiging, Total selling, Total Depriciation,Total Distribution & TOTAL SUNDRY &
-
Aperture web galleries:How to get rid of metadata?
Purchased Aperture today, and consequently a novice. I like the web galleries created within Aperture, but would like to have the webpages show up without any metadata/dates/info. Where is the setting/pref for this? G5 Mac OS X (10.4.7)