Receiving upgrade prompt every day for the same version
I am receiving a prompt in Creative Cloud to upgrade Photoshop CC. Every day. To the same version.
What gives? Is it not upgrading properly? Is this a known bug?
thanks,
John
… aaand the prompt returns again today. For the same version that (should be) installed.
Not being facetious, really am curious: Does anyone at Adobe monitor these forums? Or is this a user-support / sharing form?
thanks,
John
Similar Messages
-
FF Nightly 34.0a1 keeps updating every day to the same version?!
Ive noticed a few things this last week..
1. first, FF Nightly (the 64bit version) has updated itself to the same version number every day for the last week..
2. Video play using FF is terrible.
3. nightly looses my privacy settings..
4. Some websites say the browser has cookies turned off when they are turned on.
5. Can't even access some websites due to their spam content, I.e. They trying to force me to watch an advert, befor moving on to the item I clicked on.
6. Some pages only load partially.
7. Facebook and farmville loading dead slow. I could send the info faster with morse code and a straight key.
any ideas?This is about Firefox Nightly builds adding support for new security features.
A lot of web servers haven't implemented these yet and thus aren't working properly.
That is the risk that you run with using alpha development builds as those versions are meant for testers to check for issues with such new features.
You should stay with the current release version (Fx 32 has been released) if you aren't experienced enough to handle possible issues. -
Two files for the same version
Hi All,
After created a document and uploaded a version (the original version in the content server), I should want to upload another file (the "printable version" in pdf format) without loose the previous version (the original). Therefore I want to know if is possible to have contemporary 2 files for the same version of the document.
I saw in the CFF_PHIO table there is the class CFF_ADDFIL in the field "PH_CLASS": is useful for my goal?
Thanks for any reply.
MassimoThat is not possible.
Are you sure Inits were done for same selections ??? -
Mac Pro turns itself on every day at the same time
My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
I have had it since April and it has never done this before. It did NOT do this under 10.4.
I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
Any ideas?
Here is the console log from yesterday. It pretty much looks the same every day.
Log file:
Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 18 18:00:16 localhost kernel[0]: PAE enabled
Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 18 18:00:17 localhost kernel[0]: mbinit: done
Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
Nov 18 18:00:17: --- last message repeated 4 times ---
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
Doug -
HI
Since the SCOM was Upgrade to R2
Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation
This arrives always around 7:20AM, someday is at 7:19, other at 7:21. It is always approximately at the same hour, but we never have any problem during weekend
The description of the Event
Exceeded maximum time (15 minutes) to wait for completion of all CorrelateBatchTask threads.
After that the correlation stop to work. At the Same time if we tried to open the SCOM Console on that server we was unable to open it. Also we was not able to open the SCOM PowerShell
And also we cannot from that server to get which server is the RMS if we run get-SCOMRMSEmulator . (This the RMS Server)
When this arrive, the only thing we found, it to reboot the server or restart de SCOM service, after the Reboot the Correlation begin to work
We got also many Event 714 Critical and after this Event 711 Warning
ThankHave a look at: https://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
One user reported an issue with the exchange correlation engine after upgrade and said that:
I had issues with the corellation engine after upgrading scom 2012 to R2.
The MomBidLdr.dll version changed in the SCOM directories, and needs to be updated in the:
C:\Program Files\Microsoft\Exchange Server\v14\Bin directory.
That seemed to stop the errors for me.
Some troubleshooting steps listed here also:
https://technet.microsoft.com/en-us/library/ff360495(v=exchg.140).aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Satellite A500 keeps waking up every day at the same time
I have recently bought a A500 laptop and installed Linux there. Almost everything works fine, but I have a strange problem with suspending. My laptop wakes up every time at 8.19 am. Recently I even noticed that sometimes it simply turns on after I shut it down the evening before. Everything at the same time, always.
I know that this might seem as a Linux problem, but I had two different Linux systems installed (Gentoo and Ubuntu) and used two different terminal commands. I think this might be something with BIOS (I didn't upgrade it or something, it's all default), but I have checked all the options there and haven't found anything that might be connected to my problem.*@heksita*
You would find the solution here in the forum if you would use the Forum search option!!!
This issue has been discussed a lot of time in different threads
BIOS update is the solution!
Bye -
Why am I getting updates every day to the same three apps?
For the past week, each day I log in to the internet on my iMac (OS 10.8.5), my Creative Cloud app notifies me that updates are available to the same three apps: Photoshop CC, InDesign CS6, and InDesign CC. (Each day, I duly authorize the updates, and they are reported successfully installed.) Is this because there are actually new changes each day to these applications? Or is Creative Cloud app not recognizing that previous changes have already been made?
Thanks for your thoughts on this issue. I do NOT use any type of system
optimization utilities. Here are a few more details about my situation,
including the results of using an alternative admin user.
In looking at the "what's new" details provided for each application
"needing" an update in the CC app (on my iMac), I notice that the version
of the Photoshop CC update is 14.2, the same as the version of PS CC on my
computer. But for Illustrator CC, the update version is 17.1.0, the version
according to the Finder "Info" is 17.0.0, but when I actually open
Illustrator CC and check "About Illustrator", version 17.1.0 is indicated.
Now I'm really confused! It looks like the version information visible to
the Finder, at least, isn't being changed during the update process. Could
this indicate where the problem is?
Looking under "info" in the Finder for the Adobe applications, I notice
that the "Owner" of all the Adobe applicationsPS CC, ID CC, etc.is
"root (0)", the "Group" is "admin (80)". Many, but not all, of non-Adobe
applications on my iMac have the "Owner" as "harryhull (502)", "Group" as
"admin (80)". Could this have any bearing on the issue?
In the CC app, under Preferences>Apps, I have chosen "[Macintosh
HD]/Applications", which is where all these, and my non-Adobe, applications
reside.
OK, when I use an alternative admin user account and then I log in to CC,
ALL the Adobe applications are shown as up to date. Under the CC app's
Preferences for Apps, I left location as "default location". When I check
Finder "Info" for Illustrator CC, it still shows as v. 17.0.0. When I log
out of that user and back in to my normal user account, the CC app shows
the same apps as needing updates.
Any further thoughts? -
HT1933 I have sixteen charges in one day for the same amount, $21.19?
Can someone help me with my billing?
First, make sure that you did not inadvertently make multiple in-app purchases. Many apps, particularly games, are free for the base game but charge for additional features such as levels, "coins" and other such add-ons. Check your Purchase History to see if that reminds you as to what you might have purchased:
http://support.apple.com/kb/HT2727
If you find that these were in-app purchases, to prevent this from happening again, turn off "In App purchases" in the Restrictions settings on your device. For more information, see:
http://support.apple.com/kb/HT4213
As to a refund, that's not automatic since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
They're usually pretty lenient in the case of inadvertent purchases, but there are no guarantees.
If the charges are not in-app purchases that you made and forgot but the charges do appear in your Purchase History, contact the iTunes Store and let them know. You should also immediately change your password for your Apple ID. If the charges don't appear in your Purchase History, they were probably fake charges made directly to your credit card, and your card issuer will need to handle those.
Regards. -
How do i invite more than one invitee on different days for the same event
Hi all,
I basically want to create one event that occurs on several months with a group. I know how to invite lots of people on one day but not several days.
Please advise.
Thankshi Abbey!
just checking. have you seen these user tips and KB docs yet?
Natalie Beresford: multiple iPod/iTunes installations
How to use multiple iPods with one computer
iTunes: How to share music between different accounts on a single computer
keep us posted.
love, b -
What should I do or who should I contact? I did not make this purchase once not alone three times. Even if I did purchase something I never got it.
You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?
Have you tried reinstalling the original drive? Same symptoms with it?
-
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
Users as other task owners are receiving 5 emails notification for the same task
users as other task owners are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks
The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
" Project offers two types of delays:
Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
all leveling delays by choosing Resource➝Level➝Clear Leveling.
Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
After a couple of pages;
" Leveling Resources
In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource" -
Just recently purchased Quartet for Keynote, downloaded it after clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.
Try the developer's site FAQ;s ...
http://graphicnode.com/support/faq/
Their contact info here > http://graphicnode.com/support/contact/
Check GateKeeper
Open System Preferences > Security & Privacy > General
Make sure App Store and indentifed developers is selected.
If not, click the padlock icon to make changes. You may be prompted for your admin password.
Then try downloading the app. -
Can we create two dashboard prompts for the same column in the samepage
hi ,
can we create two dashboard prompts for the same column on the same page,
I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
Any suggestions or ideas863997 wrote:
hi ,
can we create two dashboard prompts for the same column on the same page,
I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/
Maybe you are looking for
-
I updated to Firefox v 9.0.1 and have found when opening Mozilla 2 tabs appear. I only want my home page to come up. It is very annoying. The 2nd tab is the one that congratulates you and tells you what is new in firefox.
-
OK, I have reviewed other threads on Address Book problems and the solutions there have not helped. Here is the situation, and I can reproduce the results. I am running OS X 10.7.2 on a MacBook and all was well. My address book has 935 contacts in it
-
File name gets converted to upper case
I am facing an unusual problem with Solaris 10. When I insert an USB thumb drive formatted with FAT to copy some file from the stick, some of the files whatever gets copied to hard disk get their file names changed to upper case. This is quite random
-
HT4044 What is the acceptable number of sub-pixel anomalies in the MacBook 13 inch?
What is the acceptable number of sub-pixel anomalies in the MacBook 13 inch?
-
How do I cancel firefox from my laptop
I downloaded firefox but do not want it. how do I get it off of my laptop