Recent batches 30" with shadow imprint/persistence problems

Recently changed 2!!! displays, and both 30" had the same shadow imprints or what some would call persistence. You do not need to leave the display on for a long time, just on it for about a minute, and set any coloured image on a dark bg, eg dark blue, and later switch to the complete bg which had the same dark blue background, u'll definetly be able to see the imprint or shadow coloured image which u viewed previously, its so obvious u wouldnt miss it.

from wat i understand, it is the vendor thats supplying apple with the "problematic" panels..so the recent batches of the 30" all have the shadow imprint problem, thats why apple is saying that its within specification as they cant reject all the panels from the vendor. Right now i am being in a difficult position as i know i will get back a recent batch with the same problem even if i changed another display.

Similar Messages

Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link.

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

TS1538 Hello, I have an iphone 4 and it has recently come up with a connect to itunes logo, when i connect it to my computer itunes comes up with there is a problem with your iphone. What should i do?

Hello, I have an iphone 4 and it has recently come up with the connect to itunes logo. When I connect it to my computer, itunes comes up with there is a problem with your iphone. What should i do? I need help ASAP

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Mid 2011 mbp i7 with a SSD has problems, including grey screen/blue screen/beeping/freezing when I stream live video (i.e. watch espn or time warner cable) Help? Ideas?

Recently my Macbook Pro (June 2011, i7, 8gb RAM, 512gb SSD, AMD Radeon 6750, Mountain Lion - since July - currently 10.8.2) has been presenting me with an array of problems, usually initiated when I am streaming live video. I was streaming Time Warner Cable on 12/9 and it gave me what looked like the blue screen of death. It started up after about five attempts that time. The other day, after about a week of not using the computer, it wouldn't boot past the grey screen. I (option) started it and it gave me two boot choices, the regular HD and a "10.8 restore" option. The HD gave me the grey screen and the restore option gave me the dark blue screen. I reset PRAM and that didn't work. After a force (x) start it worked. Today, I was using "Watch ESPN" and the screen froze and the computer did some kind of repeating RAM beep or something. I rebooted and it started up fine. I'm not watching any videos anymore, but this is a problem since the primary purpose for my mbp is video editing. I'm still under AppleCare but I find more solid answers in the forums or at least better questions for the AppleCare people.
Anybody have similar experiences, or a solid idea of what the heck has happened to my machine?

I'm not really sure what method that person was talking about. I just read he had a successful install so I posted it.
But I'll hazard a guess
1. copy your entire drive to a backup drive
2. boot into that drive and test it out - make sure its a flawless backup, it works, and the hard drive has no problems
3. eject that drive, disconnect it and reboot into the leopard install dvd
4. erase your main hard drive using disc utilities on the leopard install dvd -- you've made a backup, made sure that backup was good, and disconnected it so it's currently safely disconnected from the leopard install you're about to do. Also, on the hard drive you're erasing and installing leopard on to, many people recommend "Zeroing" it as well as erasing it. That option is part of the erase function in disc utilities on the leopard install disc.
5. do a clean install of leopard
6. follow step 4 from that original post exactly as that person described to do.
7. read the rest of what they said
That's pretty much it. With the backup/erase/clean install/import/ you pretty much get everything you need exactly the way you want it with very few things missing -- and you've done this over a clean install. Plus that poster did mention that you can select what you want to import from your backup hard drive.
It sounds like its a "clean install" method that gives you control via "import from machine" option in the installer. Control over what parts of your "old mac" you want to import into your "new leopard mac".
Hopefully that helps. It sounds more involved, but its actually pretty quick and provides you with a perfectly save backup in case anything goes wrong with the leopard install.

Batch processing with filename filter

Hi guys,
Does anyone have any idea how to run a specific action in batch along with a filename filter?
My problem is I have a folder with subfolders ie... 0001, 0002, 0003, 0004 etc all these folders have approx 100 jpg files with the same filenames in each.
a sample of my images are: landscape-oraange.jpg , landscape-blue.jpg , landscape-red.jpg , portrait-orange.jpg etc etc
I was wonder of a way to just run the specific batch action on filenames containing a certain word, for instance to apply to all files containing the word "landscape" and exclude all other files.
I cannot copy all files under the subfolders to a seperate folder and run this way... as all filenames are the exact same as the other folders.
Does anyone have any advise?
Thanks again guys, Jamie.

This might provide not quite what you are looking for but something similar.
Insert the correct Action and Set names in the line
app.doAction("Action 3", "Set 1")
and change the variable theIdentifier to the name part you want to use as a criterium.
This would work only if there are no spaces in the names by the way.
// 2012, use it at your own risk;
#target photoshop
// select folder;
var theFolder = Folder.selectDialog ("select folder");
if (theFolder) {
// define the name part to look for;
var theIdentifier = "Untitled";
var theFiles = theFolder.getFiles(new RegExp(theIdentifier+"\\S*.(jpg|tif|eps|psd)$", "i"));
// work through the files;
for (var m = 0; m < theFiles.length; m++) {
// open image;
var theImage = app.open(theFiles[m]);
// perform action;
app.doAction("Action 3", "Set 1")

Batch Determination with WM manual staging

Hello,
I found documentation that suggest to use Pick parts when using batch determination with WM in transfer orders. However will/can determination be used with Manually staged components inducator 4?
Thank you

Hi!
I am trying to get batched with shelf life larger than 370.
We are in ECC6.0 and the note applies to releases up to 4.5. I read the note and also tried it but the characteristic does not take a range; only a numberic value. For => 370 I get an error. The date for SLED calculated for batch determination (from the batch determination analysis for a test) as shown below:
Characteristic   Name                           Characteristic value
LOBM_ZUSTD       Status of Batch                Released
LOBM_LVORM       Deletion Ind. for Batches      Not Set
LOBM_RLZ         Remaining Shelf Life for Batc 370 d
LOBM_MBDAT       Material Availability Date     07/17/2008
LOBM_LFDAT       Batch Determin. Delivery Date 07/30/2008
LOBM_VFDAT       Expiration date, shelf life    08/04/2009
I wonder if the problem is that the operator does not seem to appear in this criteria for the calculated LOBM_VFDAT?
Thank you

Batch Renaming with Counter

I am trying to do batch renaming with a counter. Unfortunately every time I try to use a counter, it stays the same number.
For example/
I have two clips that I want to rename Ceremony 1 and Ceremony 2. When I do the batch renaming, the clips change to Ceremony 1 and Ceremony 2. The counter doesn't work.
I could do keyword collections or rename them individually, but I have too many clips.
I hope someone could help me.

I figured it out. As you saw above, I wasn't having a problem batch renaming the title of the clips. I was having a problem with the counter. I learned in a previous posting that when you change the name of a subclip of a clip, it changes the name of both the original clip (clip in event browser, not hard drive) and the other subclips associated with it. It doesn't matter how you rename the clip (changing the name in the Name box of the Inspector, change it by clicking the name of the clip once in the event browser and typing it in, or using custom naming (click on the gear button in Inspector to find it), the name will always change correctly. For some reason (I guess a FCPX thing lol), you can't use the counter in custom naming correctly unless you change the original name through custom renaming. If you change the original name of a clip the other two ways, then try to change the new name of the clip using custom renaming with the counter, the counter will always stay the same number.

Batch Printing with Desktop Printer

I have been batch printing with a desktop printer to a ethernet connected xerox phaser printer. The files are doc files that I drop onto the desktop printer to automatically print anywhere from 10-30 files at a time. I either use TextEdit or Pages as the default program for the files so I do not have to deal with the print dialog box that comes up with Microsoft Word. My problem is that if I send 20 files for example, only a certain number of them will actually print and the job of printing all of them is not completed. It appears random. Sometimes it may get through 5 and othertimes 15 files before it stops. There is no error message and it seems as if everything was sent to the xerox printer fine...
Any advise would be appreciated

I spoke with Xerox support. They suggest typing your printers IP address in a browser, clicking on PROPERTIES, select GENERAL from the file menu on the left, then select PRINTER DEFAULTS. Change Timeout Settings from a default of 120 to 999.
Apparently the printer drops info if it takes longer than a specific duration so if there is network traffic or a large number of files are being sent all at once.
I just changed my settings so we shall see if this works

My iMac 27" Late 2012 has Image Persistence Problem

I'm wondering what to do about an annoying image persistence problem on my 27" late 2012 iMac. I got the iMac just a few days ago. Monday actually, so 4 days ago.
It's the 3.4GHz i7, 8GB, NVIDIA 680MX 1TB fusion drive model.
Overall it has become the love of my life, but the image persistence thing is getting harder to ignore. This happens after only a few minutes of use. If I follow Apple's instruction on dealing with LCD image persistence, I can make it go away for a while, but it comes back very quickly.
It is extremely noticeable on a plan dark background. It looks as thought he screen has been left on for a very long time with the same windows open, but it occurrs in less than 5 minutes of use with nothing more intense than a bit of web surfing.
I've read that this is happening a great deal on these new iMacs, particularly teh 27" machines.
While the problem seems to be known to those of us afflicted I don't know if Apple has acknowledged an issue or not.
Here is a sample of the complaints: http://forums.macrumors.com/showthread.php?t=1509571
I can make the ghost image vanish by bringing up an all white scree for a minute or so or using LCD Scrub.
I'm wondering if anyone else has foun a solution other than asking for a replacement computer, which Apple seems to be granting on this issue?

Avoiding image persistence on Apple (IPS) displays
Avoiding image persistence on Apple LCD displays
If you cannot resolve the issue yourself, then return the computer for a replacement. You may do this freely within 14 days from date of purchase, so don't delay.

Working with shadows

hey guys,
i've been working on my new web layout. i have currently 1
image that's jpeg (the background) and 5 other images saved as png
files in photoshop CS2 (with transparency and drop shadow effects).
Problem i have now is, when i tried to import the 5 png files
stacked above the background, it seems that my drop shadow effect
turns out weird and ugly. here's the difference that i've attached:
PHOTOSHOP
FLASH
can anyone guide me on this (make the drop shadow effect from
flash, look like what i have on photoshop), or is there any
tutorials that could help me with this?

Not sure what version of Flash you are using, but in v.8, you
can add
similar Photoshop effects with the new filters panel. Outer
glow set as
a dark color might work best.
aesthetix wrote:
> hey guys,
>
> i've been working on my new web layout. i have currently
1 image that's jpeg
> (the background) and 5 other images saved as png files
in photoshop CS2 (with
> transparency and drop shadow effects). Problem i have
now is, when i tried to
> import the 5 png files stacked above the background, it
seems that my drop
> shadow effect turns out weird and ugly. here's the
difference that i've
> attached:
>
>
http://members.iinet.net.au/~techjunk/sample3.jpg
>
>
http://members.iinet.net.au/~techjunk/sample4flash.jpg
>
> can anyone guide me on this (make the drop shadow effect
from flash, look like
> what i have on photoshop), or is there any tutorials
that could help me with
> this?
>
>

Psc 1350 prints text with shadow in Windows 7

My all in one psc 1350 prints the text with shadow since I upgraded to Windows 7, the buttons do not work, but the rest does, any suggestions about how I can correct the shadow issue?
I tried to upgrade the driver, but with no success

My guess would be this is due to a color cartridge with misdirected nozzles. Printing from PDF or a web page would print the text as a graphic which would use the color cartridge. Try the following: remove the color cartridge and print a page that previously was shadowed. Does it now print correctly? If so the issue is the color cartridge and running a cleaning cycle may help. It is also possible that the color cartridge has failed electrically, causing it to fire nozzles inappropriately. In this case a new cartridge would be required.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

How to get most recent consecutive records with the same value

Hi,
Can someone please help me to solve my problem?
Below is my table
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------18/01/2005-----------6575947----------------7.93
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
MS_AV16850------20/06/2006-----------9515864----------------104.69
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------06/01/2008-----------1653821----------------65.49
MS_AV16850------22/02/2009-----------10866311----------------189.29
I want my query to show the rows that has most recent purchase dates with same amount in consecutive purchase date.
So from the table above, the query should display:
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
It should not get
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------22/02/2009-----------10866311----------------189.29
because inv_number 10866311 has a prvevious inv_amount of 65.49.
and not get this
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
because they are not the most recent purchase date even if they have the same inv_amount.
Thanks in advance.

Hi,
You're right; thanks for catching my mistake.
I changed the WHERE clause of the main query (including subquery there) to deal with that situation:
WITH     got_grp          AS
     SELECT      x.*
     ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )
            - ROW_NUMBER () OVER ( PARTITION BY inv_amt
                                         ORDER BY         purchase_date )     AS grp
--     ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )     AS r1
--     ,        ROW_NUMBER () OVER ( PARTITION BY inv_amt
--                                         ORDER BY         purchase_date )     AS r2
     FROM     table_x     x
SELECT     *     -- Or list all columns except grp
FROM     got_grp
WHERE     (inv_amt, grp) IN (
                           SELECT    MAX (inv_amt) KEEP (DENSE_RANK LAST ORDER BY MAX (purchase_date))
                    ,       MAX (MAX (grp))
                            FROM      got_grp
                            GROUP BY grp
                            ,       inv_amt
                            HAVING    COUNT (*)     > 1
;Thanks, too, for posting the sample data. Apparantly, you're more interested in solving this problem than OP is.
Edited by: Frank Kulash on Nov 22, 2010 1:36 PM
The r1 and r2 columns are not needed for the solution. You may want to display them, just to help see how the query works.

Recent batches 30" with shadow imprint/persistence problems

Similar Messages

Maybe you are looking for