Recent error message

I have recently been getting "an error has occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again" displayed in Airport Utility. I have 1 Extreme and 3 Express's, they all show up in Airport Utility, they all can access the internet and shared files, but if I select one of them and click on either "Manual Setup" or "Continue" I get the afore mentioned error message. In the bottom left corner of this message box it says "Error -1". I have uninstalled Airport and reinstalled, and still get this message. The computer is hard wired to the Extreme and the Express's are all wireless. I have an extra hardwired connection for my laptop, and when I use Airport Utility on it I have no problems, I can access all of the devices. It is a Dell Inspiron E1705 with Windows XP. Can't understand how I can access the internet through the Extreme, but have the Utility tell me it can't access the Extreme.

So I guess I can safely assume that I am the only one who has had this problem?

Similar Messages

Clear all recents error message l

clear all messages freezes mail; cancel does not work

Triple click the Home button to bring up the multitasking bar as some call it.
Press and hold the Mail icon in the bar until it wiggles and you get the cross appear.
Shut it down that way.
Wait a minute and reopen Mail again.

I can't print from iPhoto. Error message says no themes. This is a recent problem.

A recent error message says I can't print because I have no themes available. What is a theme and why do I need it. I just want to print. I now have to go to Preview to print my photos.

The iPhoto themes are located in the HD/Library/Application Support/iPhoto folder. Verify that the iPhoto folder contains these items:
If you do have these items in the iPhoto folder repair disk permissions with Disk Utility and try iPhoto again.
If that fails then reapply the iPhoto 9.3 updater and try once again. You are running 9.3, right?
OT

Error messages in SBO 2007A

Is there a table in SBO 2007A where I can see recent error messages for all users?

Those error messages are saved under Log folder under B1 client one by one. There is no table to hold all users' error messages
Thanks,
Gordon

Blackberry curve syncing issue error message KB19454

I have experienced this problem for some time now. It was syncing no problem and then one day this problem reared its ugly head. I read the few solutions offered elsewhere and here but none of them have helped me: I have rebooted my BB Curve several times and I also wiped the device a couple of times, and started off from scratch, but to no avail. HASSLE! Reinstalling apps and everything else.....It seems all the trouble started when I downloaded RIM's newly minted just for mac's Blackberry Desktop Manager. Wonderful. If a person could sync wirelessly (without having to purchase Missing Sync, and I see it has similar problems) perhaps I could get around this problem)
Actually, the recent error message is the most information I've gotten. Before I just got that that the device was not recognized. I tried gassing BB Desktop Manager altogether and going back to the Palm desktop, but now my Palm Desktop doesn't work either.
It's almost as if the cord is loose, so I tried a different cord, a different port, but that didn't do anything either. I really like the device, but perhaps a change is in order. A Palm Pre maybe? an iPhone that doesn't argue with my mac? So any other ideas

If you don't know where to find these two items, it will probably be a good idea for you to at least glance through the iPhone user guide.
The Info tab for your iPhone sync preferences with iTunes is availlable where the other tabs for your iPhone sync preferences with iTunes are located. With your iPhone connected to iTunes and available under Devices in the iTunes source list, select your iPhone under Devices in the iTunes source list to make the Info tab and all other tabs for your iPhone sync preferences with iTunes available in the main iTunes window. This is where you make your selections for the various items to be synced or transferred to your iPhone.
Under the Info tab for your iPhone sync preferences with iTunes, deselect sync email accounts followed by selecting Apply. If you have already created and are accessing your MobileMe account on your iPhone, this does not need to be selected under the Info tab for your iPhone sync preferences with iTunes.

I recently upgraded to the newest Firefox and now when i click on my icon I get an error message and have to click on it b4 FF will open, what should i do?

Hi,
I recently downloaded the newer version of FF and now when i click to open it i am getting an error in the top left corner of my screen. i can't even read what the message says in entirety b/c it's wrapping over off the side of the screen. When I click the error message than FF will open. Also, when I'm trying to send emails from an online shopping cart thru my business and I'm getting an error that it won't send and that's never happened until this problem w/FF. Please tell me what i should to to get FF working normally again.

Can you tell us what text is in the part that you can read ?
Is it a message from Firefox or from the Mac Operating System ?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

I have a Apple Mac desktop and recently was unable to access any YouTube, movies, videos, etc because a "Blocked Plug-in" message comes up with no error message. It asks to upload Abode Reader, but upon completion of this the message is the same.

I have a Apple Mac desktop and recently can no longer access Youtube, videos, movies, etc because I get a message reading "Blocked Plug-in". There's no error message but it does say to upload Abode Flash Player and the problem will be solved. I do this but it doesn't fix the problem. What am I doing wrong?

if you already downloaded the adobe flash player onto your mac and still getting that message that means you need to finish the installation of the flash player
you do this by opening a finder window and going to your downloads, find the flash player in here and then double click on it and follow the prompts to complete the installation.
after this is completed you will need to completely quit out of the web browser you're using then reopen it for the change to take affect and your issue should be resolved. if it's not you need to contact adobe their number is 800 642-3623.

Itunes recently attemped to upgrade to the next version on two of my Windows computers, and now I get an error message

My Windows computers (one Windows Vista computer, one XP sp3 computer) recently attemped to upgrade Itunes to the latest version, and now, I get an error message that reads:
Runtime Error
R6034
An application has made an attempt to load the C runtime Library incorrectly. Please contact the application's support team for more information. When I click OK, I get another error message tat states "Itunes was not installed correctly. Please re-install Itunes. Error 7 (Windows Error 1114).When I re-install
When I re-install Itunes, I get the same result.
Now, Itunes will not work. I cannot play any of my Pod Casts, or downloaded music. Quick Time Player, and any other Apple application does not work. What, if anything, is being done to fix this?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
The information in the first link is Apple's only public acknowledgement of this issue. No other actions they're taking to address this are publicly known.
(100293)

HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. I recently updated Pages but it is not consistent.

I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Recent error message

Similar Messages

Maybe you are looking for