Recent graduated Control-Systems (embedded) enginneer, with experience in France/lebanon/Switzerland Looking for a Job With Labview

I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc ‏77 KB
CV_SalimDARWICHE_EN_S.doc ‏229 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Similar Messages

Looking for a pager with advanced functionalities

Hello everyone,
I am looking for a pager with which I could put custom icons for the different workspaces.
I have an HTPC that is mainly used for three things: watching movies, playing music and browsing the internet. Therefore, I would like to have four workspaces, one for each of these and another one for administration. Since this is an HTPC, I'd like it to look good and I think it would be neat to have images instead of numbers/squares for the workspaces: a movie reel for the "movies" workspace, a note for "music", etc... I have been looking at pagers on the wiki, but most of the links are broken. I am currently running XFCE, but would install another WM for this. The idea came to me because I could do this on awesome 3, which is installed on my laptop, but my roommates are firmly opposed to a tiling WM on the HTPC.
If anybody can provide suggestions, they will be very welcome.
Cheers,
François

Howdy-ha- flamirande. I don't want to be a total prick, as it's not my place; it's yours. Xfwm or Awesome will get the job done, won't it? You might be able to wow them if you get a universal remote and set up a proper lirc connection, letting them sit on the couch and have the power at the press of a finger. I have some friends with XBMC (the real thing--a dedicated, old-school Xbox hacked with BSD for all their media), and they're more satisfied with the results it provides than how it looks. Yeah, their Win and Mac PCs (both my friends' and your roomates') give them Facebook and YouTube, but yours gives them music, movies and tv and internet on demand, at a smaller resource cost and with a more versatile core and interface. If they're so touchy about polish, let them figure it out. I'm not just saying this as the sorry excuse for a computer geek that I am, but also as a person who's been dealing with many roommates for roughly a decade. I mean I don't know your situation but what do they think, the setup you give 'em is supposed to get them attention?
If these folks can't be satisfied by the fact that your system can provide them with a reliable, versatile, centralized, kick-ass setup that theirs can't, well...
More constructively: If they just won't have it...maybe openbox and tint2? You've got a low ram and cpu demand there, keeping music from skipping and video from tearing, if you work it out properly. Openbox has always been my choice for the right balance between polish and minimalism.

Looking for sample template with the check on the bottom of the page

Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks

Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards..

Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?

Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?

If you simply would have posted here first, there are plenty of people who would have informed you of the current policy to have a data plan active on an account during the entire contract if purchasing a discounted smartphone.
Unfortunately, there are just as many on here who would claim the people informing you about this policy of being Verizon plants spreading disinformation and trying to make people afraid to upgrade via this route.
Yes this is a new policy, one which has been pointed out multiple times in these forums. Good luck, but I doubt you will have an outcome over this which will make you happy.
Verizon is closing as many loopholes to keep unlimited data as they can.

Looking for a designer with experience working on Motorsport projects

I am looking for a web designer with specific experience working on Motorsport websites. The project will be to design a BC site for a racing team which we will implement. If you believe you are qualified for a project like this please send me details of your portfolio and your rate. Note I am looking for someone who has actually worked on motorsport website, so will need to see evidence of this experience. If you do not have this experience please do not apply. Please PM me if you are qualified.

Hi Sir/Madam,
I recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.I am good labVIEW Programmer and I am seeking job in labVIEW Sector, please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf ‏65 KB

My company is looking for a consultant with NKE experience

Hi
My company need to write an NKE in order to port our product to OS X. We've studied the documentation and example NKE projects and know what to do and how to go about it.
However, that's in theory, when developing for an OS on which you have no experience its always slower, and obstacles are encountered, and you can't be 100% sure the design is optimal, or won't create unanticipated problems.
So we're looking for somebody with proven expertise in developing NKEs who may be interested in some paid consultancy work on a per-need basis, activities could be design review, code review, guru to ask questions if something unexpected happens etc.
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
If you might be interested drop me a reply.

niuniu wrote:
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
Hey, don't you need a favorable market opinion letter from the HRSDC before you can hire a non-Canadian?

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Looking for some assistance with my bill

A little back story. December 2009, I purchased/upgraded to Verizon’s new Motorola DROID. Loved the phone, served me well. I had a $59.99 phone plan and the $30 unlimited data plan. In November of 2010, I get an email from Verizon offering a limited promotion for $69.99 (included 450 anytime minutes, unlimited text/data). What Verizon did, was essentially give me a $20 discount on my bill each month from then on.
Now, it’s March of this year. I’ve dropped the DROID a couple times, nothing major though. But this time was different, the screen was cracked and I couldn’t get the screen to power on (although haptic still worked). At the time, I was waiting for the rumored DROID Bionic, so I decided not to upgrade right then.
I stopped by a local corporate store and explained the situation. I had an old flip phone that I wanted them to re-activate. But I clearly stated that I wanted to continue paying for the data package as I was afraid I’d lose my $20 discount and when I upgraded to a new phone, I’d be stuck paying my old full rates again.
I was told this would be fine, the rep even told me it would be wise to continue paying for data as he couldn’t tell me anything about how Verizon’s billing system handled my $20 monthly discount.
So, despite the fact that I wasn’t using my data, I continued to fork out the cash each month. A little over a month ago now, I decided enough was enough and I upgraded to the DROID Incredible 2. I first stopped at the corporate store, but quickly changed my mind. Going to a corporate store has become as bad as showing up at the Secretary of States office. Endless lines. So, I went to a third-party retailer (Russell Wireless) that just opened down the road. I gave them the back story about why I was still paying data rates and all, said everything would be fine. They got me upgraded and I’m out the door with my new DInc2.
Everything was fine, until I got my first bill after my upgrade. Amount due was $96 and change (essentially $20 over my normal bill rate). So, not only was my $20 discount gone, but my unlimited data plan had been changed to a 2GB data plan. Despite being told that I’d be grandfathered in to unlimited data when Verizon made the switch over to tiered plans.
Once again, I stopped in to the local corporate store, long lines. So, I head back to Russell Wireless. They can’t see much from their end, so I logged in to my VZW.com account on his PC so I could show him my bill. I left without an answer, but he suggested I call support.
I spoke to a rep named Jeff, and said he’d have to submit an Inactive Plan Request. Something that he’d gotten used to over the past few weeks due to Verizon changing to tiered plans. I explained the situation and said it wouldn’t be a problem. That was on Thursday, August 4th. Jeff said either himself or another rep would call me back by the following Tuesday to let me know that I was good to go with my old rates. Also, he went ahead and changed my amount due on my bill to my regular rate of $76.
I log in and pay my bill as normal. All seemed fine, until I get my latest bill. Which is again, asking for $96. Nothing had changed on my account for the better. I email support and explain the situation once again. This morning, I received the following response:
“In review of your account, I show you have the previous Motorola Droid activated on your account from December 2009 until March 2011. On March 4, 2011 you activated a basic phone LG VX8350 with a non-smartphone unlimited data bundle. The basic phone was activated on your account for over 30 days from March 4, 2011 through July 18, 2011. After activating a basic phone to your account for over thirty days, the Unlimited Email and Web for Smartphone data bundle can no longer be grandfathered when upgrading to a new smartphone device. This is why the new data pricing went into effect on your account when you upgraded on July 18, 2011 and the request was denied.
I apologize we are unable to add the Unlimited Email and Web for smartphone to your account as the feature is no longer available. Please keep in mind the current data plan you are currently on is the same pricing as your previous data plan. As a matter of fact, over 90% of our Smartphone customers use less than 2 GB of data each month. You may always keep track of your data usage by dialing #DATA or #3282 send.”
For one, I must fall in to that 10% as I was nearly over my 2GB limit last month. Also, no one had explained to me that there was a difference between dumbphone and smartphone data plans, especially because they were both the same rate each month (Which, for the record, are not named any differently on my past bills). Everyone I spoke to said I would have no issues with this switch and that I would indeed by grandfathered in with my original $20 discount.
I contacted support again because they never addressed my discount in the above email response. Here is the response I just received:
"I will be happy to address your concerns pertaining to the $20.00 discount you had previously. in review of your account I found that the $20.00 discount was available only while on the $29.99 data plan. When your data feature was changed from the $29.99 data plan to the $30.00 pricing on July 18th, that $20.00 credit was no longer an available option."
At this point, my irritation is turning to something bigger. I’ve been a loyal Verizon customer for years, they have pretty solid service in my area, and most of my friends and family use Verizon by now (free Verizon-to-Verizon calls). My employer even has a 15% discount on monthly fees through AT&T, but I’ve remained with Verizon still. But this whole situation is leaving a bad taste in my mouth. I understand that at some point, in some fine print somewhere, there may have been some mention about the 30 days on a dumbphone data plans screws everything up but I honestly don’t ever recall being given any documents that said such things. In fact, prior to my most recent upgrade, I don’t recall being given any paperwork or signing anything since my upgrade to the DROID back in 2009.

Going to the third party re-seller could be part of the issue, but also VZW now has a rule that if you go to a feature phone from a Smartphone, you have x amount of days to get back on a smartphone and keep unlimited data.Not much you can do to get around that.
Going back to the Reseller. Even if VZW was able to get you back on the plan, you most likely would be hit with a $300+ETF from the reseller for changing something on your plan within 181 of sgning the contract with them.
Either way, you would be paying more.

Look for JDeveloper Tutorial with samples code

Hello All ,
my name is Ron ,
i'm new user of JDeveloper i'm looking for a place to start a tutorial "How to use
the JDeveloper ? " with samples code .
from very basic use ( Hello world program ) to addvanced programming ( Like GUI Forms and Database )
please show me links where to start learning from
thanks in advance

The tutorials in the JDeveloper help system are a very good place to start. Choose Help | Help Topics from the JDeveloper menu then click the Tutorials book in the Help navigator. The tutorials are also available on OTN, see:
http://otn.oracle.com:8877/jdeveloper/help/
You may also find the 'how to' documents and samples on OTN helpful:
Oracle9i JDeveloper How To Documents
http://otn.oracle.com/products/jdev/howtos/content.html
Oracle9i JDeveloper Sample Code
http://otn.oracle.com/sample_code/products/jdev/content.html
Hope this helps.
- jon

My officejet pro 8500 a910 is not working with mac os lion. message is 'looking for printer'.

plse help. my officejet pro 8500 910A was working perfectly with mac os 10.6, but with installation of lion, it no longer works. message i get is 'looking for printer'. i have tried reinstalling the printer many times. also tried the Update software option but my software is fully up to date.

Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Re-add the printer in System Prefst > Print & Scan
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Looking for: UA members with Student SAP User Group

UA Professors in North America:
Does your campus have an offical SAP student user group, ERP special interest group or similar? If you do, please post with a brief description of what that group is / does.
In the next month I would like to organize a conference call for the schools with these SIGs to understand what member schools are doing, how the groups are organized, how the groups are (or are not) affiliated with your SAP initiative on campus, what works / doesn't work for your students and so on. Students at member schools have more and more interest in starting these groups - and we'd like to be ready to share best practices! Our colleagues at ASUG are interested in this topic as well, and will join us for the call.
Thanks for sharing!
Best Regards,
Heather

Central Michigan University has remained active since Dr. Andera's last post (9/29/10). We fulfilled our goal of visiting Cargil and 3M this past March 2013 in ST. Paul/ Minneapolis.I attached a couple pictures of our visits to 3M & Cargil. It was a very rewarding experience that allowed us to present our program to each company in depth. This trip taught us as group many things. We have also gone to multiple ASUG meetings including Grand Rapids, and Detroit. We are currently invited to the ASUG-Illinois Meeting on Nov 1 at Harper College, and will be hosting an event in the fall here on CMU's campus in Mt. Pleasant, MI.
As a group we have weekly meetings including guest speakers and SAP TERP10 training sessions. Our group has now reached 100+ students and continues to grow each year. There are many things we are doing that attract new students.
For instance, this past year the Information Management Institute here on campus conducted the 1st annual ERPSim. An annual invitation only competition challenging the best ERPsim teams in a competition to determine which team has developed and implemented the best business strategy for the ERPsim Game. Twenty teams of four students and one mentor competed head-to-head for the Top Honor of ERPsim Champion. The top five teams were rewarded with scholarship money and plaques.
So to answer your question, Central Michigan University currently has a very active SAP UASUG , and it only continues to grow!
If you have any further questions, please do not hesitate to ask, I am the president of the group here at CMU and would love to help you. Just email me at [email protected]

Looking for help-DVD with web/email links

Hall writes...
"snip...DVD@ccess is actually quite limited and not entirely compatible with the range of DVD playback software/hardware available on a PC... you might be better off using eDVD from Sonic (which is PC software, making use of the Interactual Player, rather than @ccess)."
I've no experience with Sonic yet but there is a small project in Chicago that needs help immediately. I'm looking for leads to pass on.
[email protected]
Thanks

Well, there's the rub.
If you use DVD@ccess then pretty much every Mac will run the software easily enough, but you have to install it on a PC and even then it doesn't work as it should in a lot of cases.
If you use eDVD then PCs will almost certainly already have the player installed (since it is a far more ubiquitous piece of software than @ccess, and is used by a high number of commercial discs already in circulation), but you'll need to install the Interactual player on the Mac...
There are probably going to be far less Mac users than PC users - which might indicate that you go for eDVD and a more PC friendly solution.
But don't be fooled - eDVD is not the saviour that we all hope it will be. There are still issues on some PCs with it, and as you have already found, some issues on a Mac as well. The thing to consider is whether the eDVD solution gives more compatibility overall with your target users than DVD@ccess will.
You could opt for a more simple solution and just place the documents that you want included into a ROM folder on the disc, then use a menu to explain what's there and how to get to it.
The strong advantage here is that you'd have to create that menu anyway for those who view the disc in a set top player, and you are also not trying to post edit your files (as eDVD requires) or use software that simply isn't good enough on PCs (as @ccess seems to be).
It may be a less elegant and less gimmicky option, but I'll bet hardly any of your users will know the difference anyway...

Help with : How Can I know the schedule for a JOB, and How Can I Change?

Hi
   I have a job and I know the name...I review in table TBTCO and I saw that this jobs is schedule at 11:00 AM and at 4:00 PM, but I need to change the schedule for this job..and that this job will execute al least four times during the day...I don´t know how can I change the schedule??
    I was thinking that if I run the transaction directly I can run, Im not sure, because I try to do in QAS environment... I when I try to run the program..the system doesn´t do anything..this mean I cant execute with F8, such as if I should be complete a parameter, but all the fields are completed.
     Thank you for your help, I promese that I will gice you points for your help.
Alice

Thank you at all.
I was reviewing the options that you send me, but Im confused about... if its possible edit the schedule that this job has in this moment, because if I enter the transaction SM36 or try to see SM37..in production environment I can´t see this schedule...
And Im not sure to do the correct steps to create something new... in QAS environment..I can´´t see this job.
All of yours help are really important
Thank you again!
Alice

Looking for a name with special character

Hi Gurus,
In our HR system we use multiple language (eg: polish, french, german, english, finns, ...). All those languages have some specific characters, like german with ß.
When we use the search help to looking for someone, it seems that only people who have the special character on their keyboard can find directly the correct name.
For example :
If I use a german keyboard I can found an employe by completed the correct last name wich contain eg ß .
if I don t use a german keyboard I have to put a * where the specific characters is.
I would like to know if somehow it were possible to customize the system in order to do not need to enter a * but the correspondant singular letter. Is there any function for converting a special character to a singular one to activated ?
Thank you for all your help
Best regards
Hadrien

indexOf() is used to find where a character or substring appears in a
given string. What you probably need is charAt() which finds out which
character is at a given position. Like this:private JTextField reportNameText;
// something needs to be put in the text field here
String reportName = reportNameText.getText();
if(reportName.charAt(0) == ' ') {
        // printing a space isn't a lot of good...
    //System.out.println("first character is"+reportName.indexOf(0));
    System.out.println("first character is a space");
    JOptionPane.showMessageDialog(null,"Report Name should not start with Space", "", JOptionPane.PLAIN_MESSAGE);
}An even better condition might beif(Character.isWhitespace(reportName.charAt(0))) {This checks for other sorts of space.
The String methods are described here:
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/String.html

Paid Project: Looking for some help with the AddressBookUI Framework

I am looking for someone with experience accessing contacts using the AddressBook related frameworks. I am able to call up the contacts modal view using the ABPeoplePickerNavigationController, but am having problems accessing the variables in the "person" "property" and/or "identifier" properties.
I am working from within the shouldContinueAfterSelectingPerson:person:property:identifier method. When the user taps on a phone number or other element in the picker, I want to pass the information as a string to a variable in my program.
If someone knows how to do this, and can help, let me know. I would love free advice, but also don't mind paying for your time. If I can get past this thing, I can move on with the rest of the program.
Many thanks.

Looks like I have it covered. Thanks to those that responded.
--Mike

Recent graduated Control-Systems (embedded) enginneer, with experience in France/lebanon/Switzerland Looking for a Job With Labview

Similar Messages

Maybe you are looking for