Recent invalid voice mail alerts
Over the last couple days my phone has buzzed me with a new voice mail message.
When I go to voice mail, there are no messages.
Anyone know if this a new virus or just a bug in the system?
Thanks!
ParDHarD wrote:
Anyone know if this a new virus or just a bug in the system?
Can't be a new virus... there are NO old virus!
What is the buzz you're hearing or feeling... Are you CERTAIN you have no other alert set to "buzz" you.
Do you mean a vibration?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Voice mail alert but no messages in voice mail
Hi - after switching to new service provider I have voice mail message alerts on my blackberry pearl handset but when I go to my voice mail I have no new messages.
Any ideas how to delete the message alert? Thanks!
Solved!
Go to Solution.Hello,
Sometimes those get stuck. One way to unstick them is to, from a different phone, call your BB and leave a message. Then, from the BB, retrieve the message and delete it. Sometimes that can get the stuck notification indicator to release.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
No sync and no voice mail alerts.
After updating the software to: v5.0.0.654, my BB no longer sync my contacts with GMAIL and
stopped the alerts for voice mail? Anybody with with problem??
Sprint could not fix it and advise me to go back to the old version I think 459.
Any suggestions?? ThanksHi and Welcome to the Forums!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Lost My Voice Mail Alerts-Bla​ck Berry 9810
I lost my voice mail notification. My internal voicemail is working fine but I have to Manuel check for new voicemails.
Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Sound issues with SMS; voice mail alerts and "lock sounds"
Every since upgrading to the latest version (on my original iPhone) the sounds do not work for such things as incoming text messages; new voice mail messages and the lock sound when I shut the phone off.
I've turned the phone off and on again; I've set and re-set the sound settings and everything looks like I should be getting sounds but it's like I have it on vibrate mode, which I don't.
I'm perplexed.... has this happened to anyone else?
Thanks!I have had the same problem as well. I can usually fix it by playing a song from the iPod. After I do this the sounds work again, still annoying though!!
-
Iphone 5 does not show voice mail
my Iphone 5 does not show any voice mail alert.
This is a carrier-supported feature. May need to have to take it to their customer service center to have it set up, provided the data/voice plan you have with them includes the option. It usually is an extra-charge feature.
-
1-My phone does not ring all the time upon recieving an incoming call, it goes directly to voice mail.
2- Not recieving alert tone upon recieving a text message.
3- Dropping calls alsoWe have the same problem widespread in our company with iPhone 4's and 5's:
- Fails to establish the call, dials but nothing happens
- Drops the call for no reason even though signal strength is good
- Recevie text alerts to notify of voicemail when the handset has not rung nor does it show missed calls
We migrated someone to a Samsung Galaxy S4 for a month and all these issues went away. Nothing to do with alert tones turned down or faulty silent switches. -
i have recently changed networks to giffgaff but now my voicemail button doent work does anyone know how to change the voice mail number so it works again? thanks
GiffGaff are not a supported UK Apple carrier .That is probably why you have lost Voicemail they are a cheap carrier who provide minimum services ,do they even offer voice mail
Go talk to them -
Documentation says to go into voice mail, select to change the personal options, then 1 to set the indicator on but 1 is not an option on my phone.
Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working
-
Email notifications on voice mail - 2014
For some reason, I no longer seem to receive email notifications when voice mail is left for me. I've checked the settings and everything looks ok, but I don't seem to get emails. I see some past posts from 2013 on this topic that things have been broken for some users. I don't see any recent messages from 2014. Any updates?
It's done in Verizon Call Assistant. Once you have vca installed and active you can log in to the vca page for your account and there is a selection under what's new at bottom right that says get email notification of who called. pressing check it out takes you to the email alerts setting page where you can set the default email address to receive notifications. I'm not sure that this is the one that send you a recording of the voicemail too.
It may work as this thread just appeared from someone who is getting the email, albeit the wrong address
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/EMAIL-ALERTS-FROM-FIOSADMIN-VERIZON-COM/...
however it also appear to be the wrong sender. You may want to query him on that thread as to how he set it up as that may be the service you area looking for. -
I Have No Voice Mail Notifications In Z10 Hub
I have seen issues with Voice Mail Notifications in various threads, but I didn't see one having No Voice Mail Notifications In the Z10 Hub at all. Sorry if I missed a thread that applies.
From what I was told by Blackberry Technical Support, at the bottom of the BB Hub next to "Calls", "Emergency Alerts" and "PIN", should be "Voice Mail" (or something similar). I have none and therefore do not get any notifications when I receive a Voice Message. I thought this was odd, and figured I had some settings incorrect, but that is not the case. It's just not there.
I am in the USA on Verizon's network with the latest updated OS 10.1.0.2039 that they offered on a STL100-4, Z10.
Anyone else have this issue?My wife had the same issue on her Z10.
A quick call to customer service at AT&T and they set it up.
Rebooted her phone, and all was well.
I'm sure Verizon customer service can do this for you as well.
Hope this helps.
Sincerely - -
When I dial the number provided to me to set up my voice mail, I get a message that I am entering an incorrect phone number. When I dial my new number directly to attempt to access voice mail that way, I get a rapid busy signal. I have attempted to call Tech Support but with on-hold waits of 45 minutes one time and over an hour the next, I simply give up (I don't have that much time to carry the phone around waiting to reach a live representative). Any ideas? Are these type of waits the norm for Fios Tech Support?
Solved!
Go to Solution.Huh, so I'm not the only one. Switched to FIOS (all 3 services) on 4/22 and it took until last night to get someone to turn on voicemail for the account. Today I went through the steps using the 888 number to set up my greeating and such.... but,.... there was no option to set up how many rings would trigger voicemail.
Called my home number to test and it just rings with no voicemail pickup. I do not look forward to calling the support number again and wading through all of the voice prompts and then waiting and waiting to get a real person.
Oh, and I followed the link on fhe voice page to download the PDF instructions. After logging on at the 888 number I'm suppsed to press "9"..... but that is an invalid choice.
I have to give Verizon credit, they've accomplished something that I thought was impossible -- they've made Comcast tech support look good.
Well done, Verzion... well done. -
Hi All,
We have a UC520 and the system is giving us an engaged tone when ever we dial voice mail from both our external and internal numbers. I have been going over and over the config and can not understand why we are getting an engaged signal when ever we ring voice mail. Below is the show run off the UC520, hopefully someone can spot some errors in it to suggest why it does not work as im close to hitting it with a large hammer
version 12.4
parser config cache interface
no service pad
no service timestamps debug uptime
service timestamps log datetime msec
service password-encryption
service internal
service compress-config
service sequence-numbers
hostname UC_520
boot-start-marker
boot system flash uc500-advipservicesk9-mz.124-22.YB4.bin
boot-end-marker
logging message-counter syslog
no logging buffered
no logging rate-limit
enable secret 5 passremoved
aaa new-model
aaa authentication login default local
aaa authentication login Foxtrot_sdm_easyvpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network Foxtrot_sdm_easyvpn_group_ml_1 local
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
crypto pki trustpoint TP-self-signed-1974105750
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1974105750
revocation-check none
rsakeypair TP-self-signed-1974105750
dot11 syslog
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ipv6 cef
stcapp ccm-group 1
stcapp
stcapp feature access-code
multilink bundle-name authenticated
vpdn enable
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 2
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme sequential
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
call service stop
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice class dualtone-detect-params 1
cadence-variation 25
voice class custom-cptone OZ
dualtone disconnect
frequency 420
cadence 400 200
voice class custom-cptone test
dualtone disconnect
frequency 425
cadence 375 375
voice class cause-code 1
no-circuit
voice register global
max-dn 128
max-pool 32
voice hunt-group 1 parallel
final 512
list 203,204
timeout 10
pilot 511
voice hunt-group 2 parallel
final 513
list 202,203,204
timeout 10
pilot 512
voice hunt-group 3 parallel
final 203
list 201,202,203,204
timeout 10
pilot 513
voice translation-rule 4
rule 15 // //
voice translation-rule 1111
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0294174218/ /101/
voice translation-rule 2002
rule 1 // //
voice translation-rule 2222
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PROFILE_ALL_FXO
translate calling 4
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate called 2002
voice-card 0
no local-bypass
username admin privilege 15 secret 5 passremoved
username KeyVPN secret 5 passremoved
username cisco privilege 15 secret 5 passremoved
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EZVPN_GROUP_1
key passremoved
dns 61.8.0.113
pool SDM_POOL_1
save-password
max-users 10
crypto isakmp profile sdm-ike-profile-1
match identity group EZVPN_GROUP_1
client authentication list Foxtrot_sdm_easyvpn_xauth_ml_1
isakmp authorization list Foxtrot_sdm_easyvpn_group_ml_1
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile SDM_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
archive
log config
logging enable
logging size 600
hidekeys
process-max-time 50
ip tftp source-interface Loopback0
class-map match-all L3-to-L2_VoIP-Cntrl
match ip dscp af31
class-map match-all L3-to-L2_VoIP-RTP
match ip dscp ef
class-map match-all SIP
match protocol sip
class-map match-all RTP
match protocol rtp
policy-map EthOut
class RTP
policy-map output-L3-to-L2
class L3-to-L2_VoIP-RTP
set cos 5
class L3-to-L2_VoIP-Cntrl
set cos 3
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/0
description $ETH-WAN$
no ip address
ip verify unicast reverse-path
ip virtual-reassembly
duplex auto
speed auto
snmp trap ip verify drop-rate
pppoe enable group global
pppoe-client dial-pool-number 1
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport mode trunk
macro description cisco-switch
interface FastEthernet0/1/1
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport mode trunk
macro description cisco-switch
interface FastEthernet0/1/8
switchport mode trunk
macro description cisco-switch
interface Virtual-Template1 type tunnel
no ip address
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Virtual-Template2
ip unnumbered Dialer0
peer default ip address pool SDM_POOL_1
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap
interface Vlan1
description $FW_INSIDE$
ip address 10.1.2.1 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Vlan100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group test-ppt in
ip mtu 1452
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname passremoved
ppp chap password 7 passremoved
ppp pap sent-username passremoved password 7 passremoved
ppp ipcp dns request
interface BVI1
description $FW_INSIDE$
mtu 1514
no ip address
ip access-group 102 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface BVI100
description $FW_INSIDE$
mtu 1514
no ip address
ip access-group 103 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
ip local pool SDM_POOL_1 10.1.2.230 10.1.2.250
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
ip route 172.0.0.0 255.0.0.0 10.1.2.2
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip nat inside source list 1 interface Dialer0 overload
ip access-list extended test-pptp
permit tcp any any eq 1723
permit gre any any
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 10.1.2.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_7##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp any host 10.1.10.2 eq non500-isakmp
access-list 101 permit udp any host 10.1.10.2 eq isakmp
access-list 101 permit esp any host 10.1.10.2
access-list 101 permit ahp any host 10.1.10.2
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.2.0 0.0.0.255 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_25##
access-list 104 remark SDM_ACL Category=1
access-list 104 permit udp any any eq non500-isakmp
access-list 104 permit udp any any eq isakmp
access-list 104 permit esp any any
access-list 104 permit ahp any any
access-list 104 permit tcp any any eq pop3 log
access-list 104 permit tcp any any eq 37777 log
access-list 104 permit tcp any any eq 3389 log
access-list 104 permit tcp any any eq 1723 log
access-list 104 permit tcp any any eq 2701 log
access-list 104 permit tcp any any eq 4899 log
access-list 104 permit tcp any any eq 4125 log
access-list 104 permit tcp any any eq 443 log
access-list 104 permit tcp any any eq smtp log
access-list 104 permit tcp any any eq 8080 log
access-list 104 permit tcp any any eq www log
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.2.0 0.0.0.255 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit udp host 61.8.0.113 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any log
access-list 104 permit gre any any
dialer-list 1 protocol ip permit
snmp-server community public RO
control-plane
voice-port 0/0/0
cptone AU
timeouts ringing infinity
voice-port 0/0/1
cptone AU
timeouts ringing infinity
voice-port 0/0/2
cptone AU
timeouts ringing infinity
voice-port 0/0/3
cptone AU
timeouts ringing infinity
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/0-Custom-HG
caller-id enable
voice-port 0/1/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/1-Custom-HG
caller-id enable
voice-port 0/1/2
trunk-group ALL_FXO 60
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/2-Custom-HG
caller-id enable
voice-port 0/1/3
trunk-group ALL_FXO 64
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/3-Custom-HG
caller-id enable
voice-port 0/3/0
trunk-group ALL_FXO 62
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/0-Custom-HG
caller-id enable
voice-port 0/3/1
trunk-group ALL_FXO 61
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/1-Custom-HG
caller-id enable
voice-port 0/3/2
trunk-group ALL_FXO 64
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 101
description Configured by CCA 4FXO-0/3/2-Custom-OP
caller-id enable
voice-port 0/3/3
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/3-Custom-HG
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 3.1
sccp
sccp ccm group 1
associate ccm 1 priority 1
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
service stcapp
port 0/0/0
dial-peer voice 2 pots
service stcapp
port 0/0/1
dial-peer voice 3 pots
service stcapp
port 0/0/2
dial-peer voice 4 pots
service stcapp
port 0/0/3
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/1
dial-peer voice 52 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/2
dial-peer voice 53 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/3
dial-peer voice 150 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/0
dial-peer voice 151 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/1
dial-peer voice 152 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/2
dial-peer voice 153 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/3
dial-peer voice 54 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/1/0
no sip-register
dial-peer voice 55 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/1/1
no sip-register
dial-peer voice 56 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/1/2
no sip-register
dial-peer voice 57 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/1/3
no sip-register
dial-peer voice 154 pots
description ** FXO pots dial-peer **
destination-pattern A4
port 0/3/0
no sip-register
dial-peer voice 155 pots
description ** FXO pots dial-peer **
destination-pattern A5
port 0/3/1
no sip-register
dial-peer voice 156 pots
description ** FXO pots dial-peer **
destination-pattern A6
port 0/3/2
no sip-register
dial-peer voice 157 pots
description ** FXO pots dial-peer **
destination-pattern A7
port 0/3/3
no sip-register
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 101
b2bua
voice-class sip outbound-proxy ipv4:10.1.10.1
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 58 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0000
forward-digits all
no sip-register
dial-peer voice 59 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 000
forward-digits all
no sip-register
dial-peer voice 60 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency TTY**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0106
forward-digits all
no sip-register
dial-peer voice 61 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency TTY**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 006
forward-digits all
no sip-register
dial-peer voice 62 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*International Access**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0001[1589]T
forward-digits all
no sip-register
dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00055T
forward-digits all
no sip-register
dial-peer voice 64 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0014[04689].....
forward-digits all
no sip-register
dial-peer voice 65 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS & Satellite**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0014[12357]......
forward-digits all
no sip-register
dial-peer voice 66 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0015......
forward-digits all
no sip-register
dial-peer voice 67 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Paging Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00160..
forward-digits all
no sip-register
dial-peer voice 68 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Paging Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0016[1236789].....
forward-digits all
no sip-register
dial-peer voice 69 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0017[1289].....
forward-digits all
no sip-register
dial-peer voice 70 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0018......
forward-digits all
no sip-register
dial-peer voice 71 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00192.
forward-digits all
no sip-register
dial-peer voice 72 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00198[01239].....
forward-digits all
no sip-register
dial-peer voice 73 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00198[45678]
forward-digits all
no sip-register
dial-peer voice 74 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*NSW Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 002........
forward-digits all
no sip-register
dial-peer voice 75 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*VIC, TAS Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 003........
forward-digits all
no sip-register
dial-peer voice 76 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Digital Mobile Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 004........
forward-digits all
no sip-register
dial-peer voice 77 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*Universal Personal Comms Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 005........
forward-digits all
no sip-register
dial-peer voice 78 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*QLD Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 007........
forward-digits all
no sip-register
dial-peer voice 79 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*SA, WA, NT Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 008........
forward-digits all
no sip-register
dial-peer voice 80 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 01100
forward-digits all
no sip-register
dial-peer voice 81 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0110[1-9]..
forward-digits all
no sip-register
dial-peer voice 82 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Public Interest Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0113...
forward-digits all
no sip-register
dial-peer voice 83 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Mass Calling Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0114.....
forward-digits all
no sip-register
dial-peer voice 84 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0119.
forward-digits all
no sip-register
dial-peer voice 85 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Directory and Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0122[1235]
forward-digits all
no sip-register
dial-peer voice 86 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Directory and Operator Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0123[46]
forward-digits all
no sip-register
dial-peer voice 87 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Operator Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 012[45]T
forward-digits all
no sip-register
dial-peer voice 88 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Local Rate Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0130.......
forward-digits all
no sip-register
dial-peer voice 89 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Local Rate Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 013[1-9]...
forward-digits all
no sip-register
dial-peer voice 90 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Carrier Preselection Codes**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 014[1-9]T
forward-digits all
no sip-register
dial-peer voice 91 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Australia*Freephone Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0180[01]......
forward-digits all
no sip-register
dial-peer voice 92 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Australia*Freephone Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0180[2-9]...
forward-digits all
no sip-register
dial-peer voice 93 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Universal PCS Profile Management**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0185..
forward-digits all
no sip-register
dial-peer voice 94 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Calling Card Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0189..
forward-digits all
no sip-register
dial-peer voice 95 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0190[0126]......
forward-digits all
no sip-register
dial-peer voice 96 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 019[1345]...
forward-digits all
no sip-register
dial-peer voice 97 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 019[679].....
forward-digits all
no sip-register
dial-peer voice 98 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*8-digit dialing**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0[2-9].......
forward-digits all
no sip-register
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern 0294174218$
b2bua
voice-class sip outbound-proxy ipv4:10.1.10.1
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
no dial-peer outbound status-check pots
sip-ua
no transport udp
no transport tcp tls
no transport tcp
telephony-service
video
em logout 0:0 0:0 0:0
fxo hook-flash
max-ephones 32
max-dn 128
ip source-address 10.1.1.1 port 2000
max-redirect 20
auto assign 10 to 43
auto assign 5 to 8 type anl
calling-number initiator
service phone videoCapability 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 5
system message
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
network-locale GB
load 7915-12 B015-1-0-3
load 7915-24 B015-1-0-3
load 7942 SCCP42.8-4-2S
load 7962 SCCP42.8-4-2S
load 521G-524G cp524g-8-1-16b
time-zone 48
date-format dd-mm-yy
voicemail 101
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 passremoved
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6... blind
secondary-dialtone 0
after-hours pstn-prefix 4 3
night-service code *6483
night-service day Sun 19:01 08:15
night-service day Mon 19:01 08:15
night-service day Tue 19:01 08:15
night-service day Wed 19:01 08:15
night-service day Thu 19:01 08:15
night-service day Fri 19:01 19:00
night-service day Sat 19:01 19:00
create cnf-files version-stamp 7960 Feb 19 2010 13:12:05
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys idle Redial Gpickup Cfwdall Pickup Newcall Dnd
softkeys seized Cfwdall Gpickup Redial Pickup Endcall Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-dn 1
number 701 no-reg primary
name IP-Paging1
paging ip 239.1.1.1 port 2000
ephone-dn 2
number 211
name name
call-forward busy 101
call-forward noan 101 timeout 10
hold-alert 30 originator
ephone-dn 5 dual-line
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 10 dual-line
number 201 no-reg primary
pickup-group 1
label 201
description Dragan Jancic
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 11 dual-line
number 202 no-reg primary
pickup-group 1
label 202
description Spare 2
name Spare 2
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 12 dual-line
number 203 no-reg primary
pickup-group 1
label 203
description name
name name
call-forward busy 101
call-forward night-service 00458707335
call-forward noan 101 timeout 35
night-service bell
ephone-dn 13 dual-line
number 204 no-reg primary
pickup-group 1
label 204
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 14 dual-line
number 207 no-reg primary
label 207
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 15 dual-line
number 206 no-reg primary
label 206
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 16 dual-line
number 205 no-reg primary
pickup-group 1
label 205
description name
name name
call-forward busy 101
call-forward noan 101 timeout 10
ephone-dn 17 dual-line
number 208 no-reg primary
label 208
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 18 dual-line
number 209 no-reg primary
label 209
description Spare
name Spare
call-forward busy 101
call-forward noan 101 timeout 10
ephone-dn 19 dual-line
number 210 no-reg primary
label 210
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 21 dual-line
number 212 no-reg primary
label 212
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 22 dual-line
number 213 no-reg primary
label 213
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 23 dual-line
number 214 no-reg primary
label 214
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 24 dual-line
number 215 no-reg primary
label 215
description Workshop One
name Workshop One
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 25 dual-line
number 216 no-reg primary
label 216
description Workshop Two
name Workshop Two
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 26 dual-line
number 217 no-reg primary
label 217
description Lunch Room
name Lunch Room
call-forward busy 203
call-forward noan 203 timeout 35
ephone-dn 27 dual-line
number 218 no-reg primary
label 218
description Meeting Room
name Meeting Room
call-forward busy 203
call-forward noan 203 timeout 35
ephone-dn 126
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 101
ephone-dn 127
number A801... no-reg primary
mwi off
ephone-dn 128
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
video
mac-address 0021.1BFC.ACA5
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:21
ephone 2
device-security-mode none
mac-address 1A02.A8FE.0000
ephone-template 16
max-calls-per-button 2
username "a1"
type anl
button 1:5
ephone 3
device-security-mode none
mac-address 1A02.A8FE.0001
ephone-template 16
max-calls-per-button 2
username "b1"
type anl
button 1:6
ephone 4
device-security-mode none
mac-address 1A02.A8FE.0002
ephone-template 16
max-calls-per-button 2
username "c1"
type anl
button 1:7
ephone 5
device-security-mode none
mac-address 1A02.A8FE.0003
ephone-template 16
max-calls-per-button 2
username "d1"
type anl
button 1:8
ephone 6
device-security-mode none
video
mac-address 0024.C40C.C2DC
ephone-template 16
username "name" password nqz82887
type 7962 addon 1 7915-12
button 1:13 2m10 3m11 4m12
button 5m16 6m15 7m14 8m17
button 9m18 10m19 12m21 13m22
button 14m23 15m24 16m25 17m26
button 18m27
ephone 7
device-security-mode none
video
mac-address 0021.1BFC.A81C
ephone-template 16
max-calls-per-button 2
username "meetingroom" password 12345
paging-dn 1
type 524G
button 1:27
ephone 8
device-security-mode none
video
mac-address 0021.1BFC.A801
ephone-template 16
max-calls-per-button 2
username "workshopone" password 12345
paging-dn 1
type 524G
button 1:24
ephone 9
device-security-mode none
video
mac-address 0021.1BFC.A81D
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:22
ephone 10
device-security-mode none
video
mac-address 0021.1BFC.A822
ephone-template 16
max-calls-per-button 2
username "lunchroom" password 12345
paging-dn 1
type 524G
button 1:26
ephone 11
device-security-mode none
video
mac-address 0021.1BFC.ACA6
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:15
ephone 12
device-security-mode none
video
mac-address 0021.1BFC.A800
max-calls-per-button 2
username "name" password lpw29837
type 524G
button 1:23
ephone 13
device-security-mode none
video
mac-address 0021.1BFC.A9B6
max-calls-per-button 2
type 524G
button 1:11
ephone 14
device-security-mode none
video
mac-address 0021.1BFC.A820
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:17
ephone 15
device-security-mode none
video
mac-address 0021.1BFC.A824
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:19
ephone 16
device-security-mode none
video
mac-address 0021.1BFC.ACA3
ephone-template 16
max-calls-per-button 2
username "workshoptwo" password 12345
paging-dn 1
type 524G
button 1:25
ephone 17
device-security-mode none
video
mac-address 0024.C40D.34A0
ephone-template 16
username "name" password 12345
type 7962 addon 1 7915-12
button 1:12 2m10 3m11 4m13
button 5m16 6m15 7m14 8m17
button 9m18 10m19 12m21 13m22
button 14m23 15m24 16m25 17m26
button 18m27
ephone 18
device-security-mode none
video
mac-address 0026.0B5D.68B7
username "name" password xiz65240
type 7962
button 1:2 2m10 3m12 4m13
button 5m22 6m24
ephone 19
device-security-mode none
video
mac-address 0026.0B5C.F949
ephone-template 16
username "name" password dqq75357
type 7962
button 1:10 2m11 3m12 4m13
button 5m23 6m24
ephone 20
device-security-mode none
mac-address 52CE.B390.0000
max-calls-per-button 2
type anl
ephone 21
device-security-mode none
video
mac-address 0021.1BFC.A803
ephone-template 16
max-calls-per-button 2
username "name"
paging-dn 1
type 524G
button 1:14 2m11 3m12 4m13
ephone 22
device-security-mode none
video
mac-address 0021.1BFC.A806
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:18
ephone 23
device-security-mode none
video
mac-address 0021.1BFC.ACA7
ephone-template 16
max-calls-per-button 2
username "name" password mbj62871
type 524G
button 1:16
ephone 24
device-security-mode none
mac-address 52CE.B390.0001
max-calls-per-button 2
type anl
ephone 25
device-security-mode none
mac-address 52CE.B390.0002
max-calls-per-button 2
type anl
ephone 26
device-security-mode none
mac-address 52CE.B390.0003
max-calls-per-button 2
type anl
ephone-hunt 1 sequential
pilot 501
list 203, 204, 205
final 511
timeout 8, 8, 8
no-reg pilot
statistics collect
banner login Cisco Configuration Assistant. Version: 2.1. Wed Oct 28 17:59:52 EST 2009
alias exec cca_voice_mode PBX
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 5 100
enddebug ccsip messages would not give me anything, so i did debug ccsip all instead, when voice
mail is dialed I get the below debug messages.
000235: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added context(0x8687FF80) with key=[2] to table
000236: //6/000000000000/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
000237: //6/000000000000/SIP/Info/ccsip_call_setup_request: Before processing SETUP REQccb->pld.flags_ipip = 200
000238: //6/000000000000/SIP/Info/ccsip_call_setup_request: This is a TDM-IP call: callID= 6, peer_callID = 5
000239: //6/000000000000/SIP/Info/ccsip_call_setup_request: This is a TDM-IP call: callID= 6, peer_callID = 5
000240: //6/000000000000/SIP/Info/ccsip_call_setup_request: After processing SETUP REQccb->pld.flags_ipip = 200
000241: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetOutboundHostAndDestHostPrivate: CCSIP: target_host : 10.1.10.1 target_port : 5060
000242: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetOutboundHostAndDestHostPrivate: CCSIP: outbound_host : 10.1.10.1 outbound_port : 5060
000243: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_SETUP
000244: //6/2022F86C800C/SIP/Info/ccsip_call_setup_request: Incrementing call counter in dial-peer [2000]
000245: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 2
000246: //6/2022F86C800C/SIP/Info/sipSPIUaddccCallIdToTable: Adding call id 6 to table
000247: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: preferred_codec set[0] type :No Codec bytes: 0
000248: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Media forking disabled
000249: //6/2022F86C800C/SIP/Info/sipSPICanSetFallbackFlag: Local Fallback is not active
000250: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Not using Voice Class Codec
000251: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Checking Video Type Rate=-1 video_codec_allowed=1F
000252: //6/2022F86C800C/SIP/Media/sipSPICopyPeerDataToCCB: Firewall traversal is not enabled
000253: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: xcoder high-density disabled
000254: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Flow Mode set to FLOW_THROUGH
000255: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Media forking disabled
000256: //6/2022F86C800C/SIP/Info/preprocessSetup:
This is a not a SIGO Call -, could be DM call
000257: //6/2022F86C800C/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.1.10.2
000258: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 17510 for stream 1
000259: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711ulaw codecbytes :160, ptime: 20
000260: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetMediaDirectionForStream: Setting Media direction SENDRECV for stream 1
000261: //6/2022F86C800C/SIP/Info/sip_generate_sdp_xcaps_list: Modem Relay and T38 disabled. X-cap not needed
000262: //6/2022F86C800C/SIP/Info/sipSPIOutgoingCallSDP: Creating recv-only stream for outbound call
000263: //6/2022F86C800C/SIP/Media/sipSPIProcessRtpSessions: sipSPIProcessRtpSessions
000264: //6/2022F86C800C/SIP/Media/sipSPIProcessRtpSessions: No active streams.
000265: //6/2022F86C800C/SIP/Info/sip_gw_pre_setup_add_sdp_container: SDP container added
000266: //6/2022F86C800C/SIP/Info/sipSPIValidateGtd: Signal Forward disabled
000267: //6/2022F86C800C/SIP/Info/sipSPIValidateTunnelData: RawMsg/QSIG Tunneling Not Enabled
000268: //6/2022F86C800C/SIP/Info/sipSPIAddMLPPServicesInfo: No MLP Info available on incoming leg
000269: //6/2022F86C800C/SIP/Info/sipSPIPreprocessUriFormat: Url cfg for 1: 2,phone-ctxt=FALSE
000270: //6/2022F86C800C/SIP/Info/sipSPIShrlGetInstanceInfo: Obtained the call instance 0 for non-shared-line '101' with callid: 6
000271: //6/2022F86C800C/SIP/Info/sipSPIAddCiscoGcid: Gcid value not set - not adding header.
000272: //6/2022F86C800C/SIP/Info/sipSPIAddPrivacyandIdentityInfo: Removing "id" value from Privacy
000273: //6/2022F86C800C/SIP/Error/sipSPI_ipip_set_history_info_header: Not SIP2SIP mode
000274: //6/2022F86C800C/SIP/Info/act_idle_call_setup: Cannot process Outgoing SIP calls
SIP Service has been shutdown
000275: //6/2022F86C800C/SIP/Info/ccsip_set_cc_cause_for_spi_err: Categorized cause:38, category:187
000276: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_set_release_source_for_peer: ownCallId[6], src[6]
000277: //6/2022F86C800C/SIP/Info/sipSPIInitiateDisconnect: Gateway shutdown:Initiate call disconnect(38)
000278: //6/2022F86C800C/SIP/Info/sipSPIInitiateDisconnect: Initiate call disconnect(38) for outgoing call
000279: //-1/xxxxxxxxxxxx/SIP/Error/sipSPIGetContentQSIG: No Inbound Container Created !!!
000280: //-1/xxxxxxxxxxxx/SIP/Error/sipSPIGetContentQ931: No Inbound Container Created !!!
000281: //6/2022F86C800C/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTATE_NONE)
000282: //6/2022F86C800C/SIP/Info/ccsip_call_statistics: Stats are not supported for IPIP call.
000283: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
000284: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 7
000285: //6/2022F86C800C/SIP/Info/sipSPIIcpifUpdate: CallState: 2 Playout: 0 DiscTime:25967 ConnTime 0
000286: //6/2022F86C800C/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_DISCONNECTING, SUBSTATE_NONE) to (STATE_DEAD, SUBSTATE_NONE)
000287: //6/2022F86C800C/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x8687FF80
State of The Call : STATE_DEAD
TCP Sockets Used : YES
Calling Number : 203
Called Number : 101
Source IP Address (Sig ): 10.1.10.2
Destn SIP Req Addr:Port :
Destn SIP Resp Addr:Port :
Destination Name :
000288: //6/2022F86C800C/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : No Codec
Negotiated Codec Bytes : 0
Nego. Codec payload : 255 (tx), 255 (rx)
Negotiated Dtmf-relay : 0
Dtmf-relay Payload : 0 (tx), 0 (rx)
Source IP Address (Media): 10.1.10.2
Source IP Port (Media): 17510
Destn IP Address (Media): -
Destn IP Port (Media): 0
Orig Destn IP Address:Port (Media): [ - ]:0
000289: //6/2022F86C800C/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 38
Disconnect Cause (SIP) : 200
000290: //6/2022F86C800C/SIP/Info/sipSPIUdeleteccCallIdFromTable: Removing call id 6
000291: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: Context for key=[2] removed.
000292: //6/2022F86C800C/SIP/Info/sipSPIFlushEventBufferQueue: There are 0 events on the internal queue that are going to be free'd
000293: //6/2022F86C800C/SIP/Info/ccsip_qos_cleanup: Entry
000294: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISipSdpFree:
000295: //6/2022F86C800C/SIP/Info/sipSPI_ipip_free_codec_profile: Codec Profiles Freed
000296: //6/2022F86C800C/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 8687FF80
000297: //-1/xxxxxxxxxxxx/SIP/Info/ -
Voice mail and Embedded-Service-Engine0/0 issue
Recently I added PSTN and SCUE-ISM-8.6-K9 to be applay (IVR and Voicemail) on my Cisco Router 2921 ,
The PSTN now is working properly ,But I facing three issue of the voicemail ,Embedded-service Engine and IVR configuration as the following:
1- I recieved the following error message when enable the Embedded-Service-Engine0/0
"Memory size does not meet the requirements of Embedded-Service-Engine0/0"
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FCZ162670HW
4 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Cisco Unity Express 8.6.6 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
2- Kindly the attached file of the Voice mail configuration but not working.
3- Please, can you provide of a document about IVR configuration ?Hello Ammar,
As per the error you required more memory for ESE module to work, you have only 512MB memory. Now I assuem you configured on Service-Module right ? It will work fine without any issue.
Next for your voicemail not working can verify that you have configured the SIP dial-peer to reach the Voicemail tiggered phonenumber i.e. 700 in your case.
dial-peer voice 101 voip
session protocol sipv2
session target ipv4:192.168.130.101
destination-pattern 700
Thanks
Selva -
Unity Connection Voice Mail Only- NO MWI template
I am deploying a site with 8,000 mailboxes. 4,000 of those users are voice mail only without a telephone and will NOT require MWI.
I can manually remove the MWI setting from each mailbox, but I am looking at either a BATCH CSV setting or a TEMPLATE that I can turn OFF mwi when creating the users.
Any ideas?
TIAHi there,
This setting change is available via Bulk Edit
Bulk Edit> Messages> Disable MWI functionality for this user
Bulk Edit changed in 8.x from where it was accessed in 7.x.
Here's a clip that speaks to how this is run now. You first search and select all
the users you want to change and then choose Bulk Edit;
To Edit User Account Information in Bulk Edit Mode (some editing from original > this example
is for Caller Input settings but you'll see the point)
Step 1 In Cisco Unity Connection Administration, on the Search Users page, check the applicable user check boxes, and select Bulk Edit.
If the user accounts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable users. Then select Bulk Edit.
Step 2 On the Edit Caller Input page, change settings as applicable.
Note The Status message at the top of the Edit Caller Input page tells you how many user accounts are being edited. Also note that the page is populated only with the fields that you are allowed to edit in bulk mode, and that the fields available for edit also depend on whether all of the user accounts reside on the local server.
Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.
Step 4 Select Submit.
Step 5 If applicable, continue to change settings for these user accounts on the related pages available from the Edit menu. As you make changes on each page, select Submit before going on to the next page to make additional changes.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac090.html#wp1049545
Try a couple of test users first to come up with the exact plan.
If you prefer you can also use Bulk Edit via .csv
As a test here I tried the Bulk Edit and chose;
User with Voicemail > Users referenced in this CSV file > Next
This then allowed me to browse to an existing "basic" .csv that I had
used to create a test user recently when playing with BAT. In this .csv
I had one user named Bob Uncle with DN/ext 5126. So when I used this method
the Bulk Edit tool (smart puppy ) selected only Bob Uncle for my edit choices
and I was able to change the Disable MWI functionality for this user
Again, please try manipulating some test users to perfect
your methodology.
I have attached the test .csv I used
Cheers!
Rob
Attachments: buncletest Mailboxes.csv.zip (255 bytes)
"Show a little faith, there's magic in the night" - Springsteen
Maybe you are looking for
-
Cannot edit my navigation bar / drop down menu
Somebody pls help me! I am new to Dreamweaver, but have been studying it heavily the pst 3 weeks (using Sams Teach Yourself book). I have inherited a site and switched their navigation bar from the current one to a different (drop down) that was stor
-
Just can't seem to get the router to connect to the Internet!
I've had a D-Link DI-604 router for about 4 years-- and wanted to go wireless with an Apple Extreme but first have borrowed my neighbor's D-Link DIR-635 to just see if this will work in my brick house etc. (3 stories, lots of cement and brick...) Wel
-
Hi All, I am on a support project, SAP HR went live and the client started running the payroll w.e.f April 2009. Till now there was no problem with the payroll run, but this time all of a sudden the "Bank Account Number" for around 15 employees i
-
Flashing "?" alternating with Mac icon on display
I turned on my G5 for the 1st time and the only thing that shows on the monitor is a small folder in the center of the screen with a question mark "?" in the middle alternating back and forth with the Mac icon every couple seconds. There is no indica
-
BI Publisher 11g - any classes being offered on this?
Are there any plans to offer training classes on 11g? Edited by: user721036 on Sep 27, 2010 2:42 PM