Recent Itunes Upgrade screwed up computer?

We recently upgraded to iTunes 6.0.4.3. We lost all our dock settings, and now Safari and IE crash when we try and browse the net.
Any ideas? Could something else have caused this?

Click here and follow the instructions.
(29174)

Similar Messages

  • Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

  • I have downloaded the most recent itunes on my new computer with windows 8        but a message pops up saying "the itunes library.itl file is locked, on a locked disk or you do not have write permission for this file. How do I fix?

    I have downloaded the most recent itunes on my new computer with windows 8 but when I attempt to get in I get this message "The itunes library.itl file is locked, ona locked disk, or you do not have write permission for this file."  How do i fix this?

    Repair iTunes Security Permissions
    Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
    If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
    Repeat with the media folder if it isn't stored inside the main iTunes folder.
    If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
    The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
    tt2

  • ITunes upgrade restarted my computer when I told it not to !?!?!

    iTunes upgrade restarted my computer when I told it not to !?
    I've just lost my work in progress when I told iTunes to upgrade (what a mistake!) to version 10.2.0.34, then at the end it asks me if I want to reboot, to which I said NO, and then it rebooted anyways (!?!!?!) and didn't ask me to save and close my data, so I lost all my work in progress(!?!?!?!?!!?!?!!?!?!?!???)
    AAAARRRRRRRG ! PLEASE FIX THIS !!

    Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

  • Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".

    Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".
    When I connect my iPhone or iPad I can see every items on them but not on the iTunes Library.
    They sync fine with iTunes.
    I browse all the menus in iTunes but cannot find any clues to what I have done for it to happen. It worked fine previously.
    Thanks for any suggestion.

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • TS2972 Since a recent Itunes upgrade I've lost the settings facility in home sharing to import tracks not in my library.  When I check for updates I'm running the latest version.  Any ideas how to resolve this?

    Since a recent Itunes upgrade I've lost the settings facility in home sharing to import tracks not in my library.  When I check for updates I'm running the latest version.  Any ideas how to resolve this?

    Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

  • Recent iTunes upgrade.

    Recently the iTunes upgraded itself, which took away one feature I liked, but that's another rant. The question I have here is when you download podcasts you can add them to your playlists, however over time when you download new podcasts it doesn't automatically add to those playlists. Is there a way to do that?
    In the playlist I can sort it alphabetically, but I can't
    sort it by release date if I want unless I delete the playlist and re-add. Is there an easier way?
    Thanx.
    me.

    You can make a smart playlist, that will update
    itself.
    Ok, how?
    You can sort an existing playlist by clicking on the
    column heading. For example clicking on the words
    "Release Date". Click on "Name" changes the sort to
    name. Some columns when you click on them will sort
    in different ways. For example Album, when clicked
    on can become "Album by Artist".
    Right, the playlists can be sorted by the following:
    Time
    Last Played
    Artist
    You then right-click and bring up the following:
    Album
    Album Artist
    Beats Per Minute
    Bit Rate
    Category
    Comment
    Composer
    Date Added
    Date Modified
    Description
    Disc Number
    Epidose ID
    Equilizer
    Genre
    Grouping
    Kind
    Last Skipped
    My Rating
    Play Count
    Sample Rate
    Season
    Show
    Size
    Skip Count
    Track Number
    Year
    However it doesn't have a column for "Release Date", which tends to allow it to sort by the original order it was downloaded. That's what I'm hoping for, otherwise I have to delete the Playlist name and re-add it.
    If a particular column heading you want is not
    visible, right click on one of the column headings
    that is there, and you will get a list of possible
    column headings.
    Which feature are you missing?
    I'm hoping for "Release Date".
    meagain.

  • Has the recent Itunes upgrade caused incompatibility issue with APPLE TV 1st gen?

    after recent upgrade to itunes, itunes no longer recognizes data on my apple tv 1st gen....but the Apple TV still has them loaded.  additonally this new itunes does not let me resync new songs or movies, etc.  thoughts? thanks!

    I'm having the exact same issue. Nothing in the "Music" menu except "My Music". I Noticed it this afternoon when I woke my Apple TV from standby. The disappearance, in my case, was not related to a reset. My Apple TV has not been reset since the power went out here several weeks ago. Though I obviously don't know for sure, I'm guessing that it's some kind of store problem and we most likely won't be able to correct it from our end.

  • My Ipod touch's touch screen is disabled following water damage. How can I circumvent my passcode to transfer my recent iTunes purchases to my computer?

    The touch screen on my iPod touch doesn't work anymore following water damage. I can't connect to iTunes on my computer because the iPod is passcode protected. How can I transfer a few albums that I recently bought from the iPod to my computer?

    Use 3rd party software like:
    http://www.digidna.net/products/diskaid
    http://www.wideanglesoftware.com/touchcopy/index.php
    For items purchased (including apps) from iTunes:
    http://support.apple.com/kb/HT1848

  • Ipod Touch won't sync since recent iTunes upgrade

    When i try to add songs (not purchased through itunes although I dont know if this is relevant) to my ipod touch they show in itunes under my device however they do not seem to copy to the ipod. Say I add and album then add another the first album gets erased from the ipod and only the most recent files copied remain on the ipod however they all still show as existing on the ipod within itunes, The same thing happens to my ipad and it only seems to have happened since I last upgraded itunes. Both devices have been set to manually manage music and videos so I'm at a loss as to why this is happening,
    has anyone got any ideas as I have tried to get hold of older versions of itunes from Apple - Support - Downloads however they report an error when installing (doesnt say what error)

    With all the synced media like apps and music in your iTunes library do the following:
    - Make a backup in iTunes by:
    iOS: How to back up
    - Restore the iPod from that backup. The above link includes that restore from backup instructions.
    Somehow updating iTunes caused iTunes/iPod to think it was not synced to this library. That happens sometimes.

  • Recent Itunes upgrade, now cannot access store, PLZ Help

    My Itunes was working perfectly until I did the recent upgrade. Now I cannot connect to the store. The connections are the same, only change was the upgrade.
    I ran the restore feature in windows to roll back to earlier time, but still having same problem.
    I would gladly uninstall Itunes and Quicktime and reinstall fresh, if I knew _how to save the 300 album cover artwork and playlists and purchased items_ I had saved in itunes to link to my apple t.v.
    Any help would be greatly appreciated

    Scroll down through this : http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-backing -up-your-itunes-library/
    and it will tell you what folder in iTunes contains what you want to preserve.
    Copy those folders to a safe location and then, after the new install, move them back to the correct locations.

  • Since recent iTunes upgrade, Apple TV will no longer connect to iTunes

    several glitches, this being a big one. any suggestions?

    Now before winston says I am barking mad this is an all apple issue and should not be an issue
    I'm not saying this isn't a genuine issue for some, I just don't believe it's a general issue with 7.5, we get these reports after every upgrade and usually in quite high numbers, but as I said before high numbers usually mean 50 or so which isn't really a lot.
    I suspect many of these issues are caused because itunes has not installed properly due to a file being in the wrong place, corrupt, missing or having wrong permissions etc, which has not allowed the installer to overwrite, move, rename or delete etc that file or another one.
    I don't necessarily blame the user for this, but then again I'm not so sure you should blame  for it either, it can often occur through using poorly written 3rd party applications for example. The point I make or at least try to is that when trying to solve such issues it is often unhelpful not to have an open mind about the cause and hence the cure for such problems.

  • After the most recent ITunes upgrade, I cound not install it nor can I now run the old version. I get an error 7 Windows error 1114 and a R6034 C runtime error. Help!

    After running the upgrade to the latest ITunes I cannot run Itunes. I get a Error 7 Windows error 1114, and a R6034 C runtime error.
    It was working before.
    Help!

    Hi sking10313,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • Following the recent iTunes upgrade I am getting two error messages (-42404) and (-50).  Any ideas how to rectify?

    Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50).  I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content.  I've uninstalled and reinstalled iTunes but it's made no difference.  Any ideas how to fix please?

    Disable your firewall/security software.

  • Podcasts playing back at improper speed after recent iTunes upgrade

    iPod Touch G2
    After upgrading iTunes this week (SHARED > Home Sharing is now in the left pane), podcasts now play back improperly. Different podcasts now play back at higher speeds.
    Music (songs) plays back at normal speed.
    What to do? Do I have do a Restore?
    Thanks.

    it's easily done. that's why i always make sure to hit the power button and put it into sleep mode before putting mine in my pocket! (if you double click the home button while it's in sleep mode you can bring up music controls for quick track skips/pauses without having to slide to unlock)

Maybe you are looking for

  • Image locked and can't be deleted

    I just took over updating my company's website. On one page, there's an image that is locked and I can't figure out how to unlock it so I can delete it. Can someone help me?

  • Oracle FileSync: not able to find the Oracle Web Server

    Hi, I am having the OCS 10.1.2.3.0 on a Linux server. I am not able to create a mapping in the Oracle FileSync While Adding a mapping in the Web Server mapping wizard the http://<server>:<port>/<DAVRoot> i have given as per my server settings as http

  • Opening video (MPEG) files on a Mac

    I recently switched from a PC to IMac. Transferred all my video files to my Mac but each time I try to open one I am told it can not be opened as Quicktime does not recognize the file. Any help appreciated

  • WTK22 JSR172Demo - missing SOAP body

    Hi, I tried the sample JSR172Demo provided with WTK22, with the server running on localhost. Hence the WSDL port is as below: location="http://localhost:8080/serverscript2/serverscript" The service has been verified to be running. The stubs for the c

  • How to use a namespace in a C++ code communicated with labview

    I have a long code written in c++.  Now I want to acquire data with labview, send some data points as an entry to my c++ code and it will return a value to Labview.  I tried with a simple sum of two elements and it worked, but in my long code I have