Recent News on How to upgrade the 802.11g Wireless Card to a 802.11n Card

Hi everyone!
I have a macbook Core Duo (not core 2 duo) and I want to buy the new airport express. I was really upset to see that I will not gete the performance upgrade of the n technology on my new computer. Finnaly I saw this post on AppleInsider
http://www.appleinsider.com/article.php?id=2510
It says that you can replace the wireless card in the Macbook with a card from the Mac Pro (the same size and same amount of antenas) and the n technology would work (and increase speed and performance).
Here is how to do it:
http://www.hardmac.com/articles/71/
Has anyone done this yet? Does it work? Is there a violation of Applecare by doing this? Where would you get a n airport card for the MacPro?
Any ideas on this subject would be great!
If it is true and leagl, then I would be very happy.
Message was edited by: AlwaysApple

As to your question about a 'violation of Applecare...' it was already answered in your first link...
"A quick warranty-voiding disassembly later..."
Macbook 1.8-) Mac OS X (10.4.8) Week 38 base model w/1G Ram

Similar Messages

I have a 10.5.8 and would need to know how to upgrade the soft ware to maverick or do I need to buy a new computer

I have a 10.5.8 and would need to know how to upgrade the soft ware ? . or do I need to buy a new computer.

Back up your data, click here, and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
(106103)

How to upgrade the hard disk of the nomad jukebox

I read the FAQ of nomad on nomadness.net, I wanna know how to upgrade the hard disk of old nomad jukebox with a bigger one?
I also read a artical on tom's hardware about this,
http://www7.tomshardware.com/mobile/20000/mp3-3.html
but he gave a link
http://www.kuren.org/jukebox
that is not available. He mentioned that it need to clone the fist 65536 sectors from the old disk to the new one, but I have not the old hard disk( I bought a second hand nomad jukebox without the original hard disk). How should I do?
Does someone have the image file of the fist 65536 sectors from the old disk?
Thank you!

That was the old method before Creative published their Bootcode Flasher software.
Follow the instructions here:
http://www.nomadness.net/modules.php...ticle&artid=24
All files mentioned are available somewhere on Nomadness. Also check out the sticky thread in their JB section of the forum as it lists what hard dri'ves will work in a JB and which ones won't. I hope you haven't already bought your upgrade hard dri've.
I used the above method without any problems and now have a 20GB JB.
PB

When i update apps on my iphone they need the ID that i used when i downloaded these app and i forgot this ID and a make a new ID how i used the new one to update these apps thanks

Hello all,
when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
How i used the new one to update these apps?
thanks

Your device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
tt2

10G NEW FEATURE-HOW TO FLUSH THE BUFFER CACHE

제품 : ORACLE SERVER
작성날짜 : 2004-05-25
10G NEW FEATURE-HOW TO FLUSH THE BUFFER CACHE
===============================================
PURPOSE
이 자료는 Oracle 10g new feature 로 manual 하게
buffer cache 를 flush 할 수 있는 기능에 대하여 알아보도록 한다.
Explanation
Oracle 10g 에서 new feature 로 소개된 내용으로 SGA 내 buffer cache 의
모든 data 를 command 수행으로 clear 할 수 있다.
이 작업을 위해서는 "alter system" privileges 가 있어야 한다.
Buffer cache flush 를 위한 command 는 다음과 같다.
주의) 이 작업은 database performance 에 영향을 줄 수 있으므로 주의하여 사용하여야 한다.
SQL > alter system flush buffer_cache;
Example
x$bh 를 query 하여 buffer cache 내 존재하는 정보를 확인한다.
x$bh view 는 buffer cache headers 정보를 확인할 수 있는 view 이다.
우선 test 로 table 을 생성하고 insert 를 수행하고
x$bh 에서 barfil column(Relative file number of block) 과 file# 를 조회한다.
1) Test table 생성
SQL> Create table Test_buffer (a number)
2 tablespace USERS;
Table created.
2) Test table 에 insert
SQL> begin
2 for i in 1..1000
3 loop
4 insert into test_buffer values (i);
5 end loop;
6 commit;
7 end;
8 /
PL/SQL procedure successfully completed.
3) Object_id 확인
SQL> select OBJECT_id from dba_objects
2 where object_name='TEST_BUFFER';
OBJECT_ID
42817
4) x$bh 에서 buffer cache 내에 올라와 있는 DBARFIL(file number of block) 를 조회한다.
SQL> select ts#,file#,dbarfil,dbablk,class,state,mode_held,obj
2 from x$bh where obj= 42817;
TS# FILE# DBARFIL DBABLK CLASS STATE MODE_HELD J
9 23 23 1297 8 1 0 7
9 23 23 1298 9 1 0 7
9 23 23 1299 4 1 0 7
9 23 23 1300 1 1 0 7
9 23 23 1301 1 1 0 7
9 23 23 1302 1 1 0 7
9 23 23 1303 1 1 0 7
9 23 23 1304 1 1 0 7
8 rows selected.
5) 다음과 같이 buffer cache 를 flush 하고 위 query 를 재수행한다.
SQL > alter system flush buffer_cache ;
SQL> select ts#,file#,dbarfil,dbablk,class,state,mode_held,obj
2 from x$bh where obj= 42817;
6) x$bh 에서 state column 이 0 인지 확인한다.
0 은 free buffer 를 의미한다. flush 이후에 state 가 0 인지 확인함으로써
flushing 이 command 를 통해 manual 하게 수행되었음을 확인할 수 있다.
Reference Documents
<NOTE. 251326.1>

I am also having the same issue. Can this be addressed or does BEA provide 'almost'
working code for the bargin price of $80k/cpu?
"Prashanth " <[email protected]> wrote:
>
Hi ALL,
I am using wl:cache tag for caching purpose. My reqmnt is such that I
have to
flush the cache based on user activity.
I have tried all the combinations, but could not achieve the desired
result.
Can somebody guide me on how can we flush the cache??
TIA, Prashanth Bhat.

I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone?

I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.

You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps

How to upgrade the version above 10.4 in free

hello,
Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
Thanks very much!

You can't.
An upgrade from 10.3.x to 10.4 is a paid upgrade.
You need to purchase a retail copy of 10.4.

HT1414 How to upgrade the firmware on i phone

Please advise how to upgrade the I Phone 4 ???

Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade.

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

How to fool the cluvfy (11g) into thinking CentOS is an acceptable OS

Hi,
Does anyone know how to fool the CVU (11g) to think CentOS 5 is acceptable? With 10g it was easy, just edit the /etc/redhat-release file. But it seems Oracle has gotten wise and made 11g tougher to fool.
I am in the midst of installing Oracle 11g Clusterware. I am at the tailend of the Clusterware Installation, on the "Configuration Assistants" screen and I just got a failure message at the part where the OUI runs the "Oracle Cluster Verification Utility", this command is executed:
cluvfy stage -post crsinst -n node1,node2
The command fails because it doesn't accept the Operating System and then OUI reports the error.
Has anyone got a workaround for this?
Thanks,
Phany

Thanks for your response.
I see what you are saying. You are saying it is safe to click the Next button on the OUI if you are confident the error thrown by the CVU is ignorable.
I want to clarify that my initial impression was that the OUI was stuck at this failure and it was unsafe to ignore the error and proceed farther because perhaps some important step may be skipped. However I reviewed my screenshots from the last time I installed RAC a year ago (10gR2), and it seems like on this "Configuration Assistant" Screen the CVU is the last step. The other assistants "Succeeded", so I feel fairly confident with clicking the [Next] button on the OUI and proceeding.
My screen looks like this:
==================================================
Configuration Assistants
Tool Name.............................................................Status.............Type
Oracle Notification Server Configuration Assistant.......Succeeded.... Recommended
Oracle Private Interconnect Configuration Assistant.....Succeeded.... Recommended
Oracle Cluster Verification Utility................................Failed (See Details).... Recommended
...................................................................... [Retry] .......[Stop]
Details
|....blah, blah, blah.............................. |
| ........................................................|
[Help]...........[Installed Products].......[Back].......[Next] ........ [Install] ...... [Cancel]
==================================================
LOL, I guess it was the popup error message that spooked me into not clicking the Next button:
OUI-25031: Some of the configuration assistants failed/cancelled.
It is strongly recommended that you retry the configuration assistants at this time.
Not successfully running any "Recommended" assistants means your
system will not be correctly configured.

Will 2800-400 BIOS update enable 802.11g wireless LAN?

I recently bought a Belkin 54G cardbus wireless adapter for use with my Satellite 2800-400, which has a Windows ME OS.
The setup software wouldn't install a driver, even though ME was said to be supported.
I wrote to Belkin and they told me that it was because the laptop BIOS didn't support 802.11g wireless and that I should update the BIOS. I updated to BIOS version 2 but it didn't make any difference.
I don't know if Belkin's instructions were on the right track or whether they were they just pushing the responsibility as far away from themselves as they could.
Please can anyone tell me if my laptop does support 802.11g wireless, with or without the BIOS upgrade?
TIA
Mike

> Hi
>
> Im not 100% sure if your notebook supports a
> wireless LAN connection because I dont found any
> informations about it.
Thanks for the reply. the notebook does support wireless LAN because I can get a 802.11b card to function OK.
> But as far as I know its not
> necessary to update the BIOS therewith the Wireless
> card works.
Well it's done now so there may be other benefits. Not 802.11g wireless though it seems.
> I recommend to contact the service partner. They have
> more detailed informations about this unit.
Thanks I'll try to find and contact a service partner.
Mike

Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network? I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
Thx! ACB

Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
It would be extremely unlikely that the Express could do what you want, but some things are never known until you try.

Netgear WG311v3 802.11g Wireless PCI Adapter

I have a G5 Tower with PCI slots.
Is there a way to make this wireless card recognized as an AirPort card under OS 10.5.8?
Currently, it does not even show up System Profiler.

Just google "Netgear WG311v3 802.11g Wireless PCI Adapter". Apparently it supports Windows OS's. You can also inquire from the manufacturer.

How to upgrade the Oracle Client silently ?

Hi all,
I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
The following command doesn't work:
C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
What am I doing wrong? How to remove the Oracle Client silently?
Thanks for the help and best wishes from Frankfurt.
Dimitri

I created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
These are parameters are in my response file...
ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
ORACLE_HOME_NAME="OraInstantClient10g_home1"
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=true
REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories.

How to upgrade the Admin Server to WLS 9.2.3 while Managed on 9.2.2

HI,
I have a WLS 9.2.2 domain with Admin and 2 Managed instances clustered. Admin and Managed Servers are on different machines.
I want to upgrade only the Admin Server to WLS 9.2 MP3 while all my Managed Servers are in WLS 9.2 MP2.
Can any one provide me the detailed steps on how to upgrade only the Admin server to WLS 9.2 MP3?
And I read in the Weblogic documentation that this supported. But could not find any detailed steps on how to upgrade only the Admin server to the Major version.
Thanks in Advance.

Hi
1. "And I read in the Weblogic documentation that this supported". Can you please provide the link or documenation that exactly says that this is Supported ???
2. As far as I know, one of the basic requirements for Weblogic Cluster with managed servers across different remote machines is, all the machines, Admin and Managed Servers machines should have Exact Same Version (including Service Pack) of WLS deployed. Right now I do not have this link on top of my head. But this is the only Supported and one basic requirement for Weblogic Cluster.
Since WLS uses all Shared Modules and each Shared module do have like Implementation and Specification Version. If you upgrade admin server domain, most probably config.xml file will be upgraded with all modules version as 10.0.2.3 (something like that). This means when you restart Managed Servers, they will get a new copy of config.xml file from admin server machine. So now on Managed Servers all these modules (10.0.2.3 etc) should exist on their local machines. This is just my thought.
Thanks
Ravi Jegga

Recent News on How to upgrade the 802.11g Wireless Card to a 802.11n Card

Similar Messages

Maybe you are looking for