Recent problem ripping

In the past month or so I've been ripping CDs from discs to replace songs I've downloaded off the internet. Problem is, on a CD with say, 4 songs, it might rip 2 or 3. I haven't seen this discussed in any other threads, what should I do?
Oh - I have a Zen Xtra 40 Gig player.

Do you think it's because you don't have enough room on your computer? a while ago i noticed that if songs are in mp3 format, they take up much less space on your computer...songs from audio cd's are usually bigger files...try deleting songs off of your library as soon as they're on your player. that way you have them, but they're not clogging up space on your comp. and you should be able to fit at least an entire cd at a time in your library.
hope that was helpful..if not sorry..good luck

Similar Messages

  • I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

    i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

    Here is the download page

  • Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

    Question
    Printing internet pages
    Reduced print size
    Only the first page is reduced and printed as desired
    All pages after the first page are full size with information cut off
    Recent problem never seen before
    Can print from Safari and other software just fine
    How can I get all pages to be reduced size?

    One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
    Reset all Firefox printer settings
    # Open your profile folder:
    # On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
    # Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
    # Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
    # On the menu bar, click on the Firefox menu and select Quit Firefox.
    # In your profile folder, copy the prefs.js file to another folder to make a backup of it.
    # Open the original prefs.js file in a text editor (such as TextEdit).
    # Remove all lines in prefs.js that start with print. and save the file.
    # If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

  • TS1559 My iPhone 3GS will not now join wifi.  This is a very recent problem and I have tried everything so hope someone can help.  I go Settings then Wifii, it picks up network no problem but then does not download IP Address.

    My IPhone 3GS will not now join wifi, this is a very recent problem.  It finds my network but does not download the IP Address hence when I load password Join remains grey.  I have tried all the fixes suggested I.e.  network reset, airplane on then off but still nothing.  I also have another iPhone of the same type and an iPad and they are just fine so I know it is not a router problem.  Please please what do I do?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I can't send texts to some contacts in my iphone 4s. This is a recent problem, as previously all texts would send. The red exclamation mark appears and 'not 'delivered' shows on screen.

    First time I've used this discussion forum, so may be posting problem twice! I can't send texts to some contacts in my iphone 4s. This is a recent problem, as previously I could send texts whenever I wanted. The exclamation mark and "not delivered' shows on screen when I ry and text certain people. I know for a fact that my number is not blocked by the receipients?

    I've just realised, further to my earlier question - that the people I am trying to text do not have Iphones? Could this make a difference? (Although I have text them in the past)

  • Right-click to 'open new tab' on address opens a tab in ANOTHER WINDOW than current one. recent problem.

    When I right-click on address and choose 'open in new tab', it creates the new tab in a DIFFERENT window. Current window is not full'. Recent problem, and consistent.
    Thank you.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Problems ripping postscript files with cs4/no bleed?

    I have having a problem ripping high res files to postscript and distilling not showing the crop marks, bleeds or any printer marks. On the export these are checked properly. A normal pdf export from CS4 works fine, but when I rip to ps and distill the marks are gone. I appreciate any help.
    rob

    Is it possible you're just not printing to the right size page? What
    page size is your ID document, and what page size is your PDF?
    Why are you printing and distilling instead of just exporting PDF?
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • TS3899 Why can't I reply to emails on my iPhone 5 - this is a recent problem, I have been able to reply and delete email messages previously.

    Why can't I reply to emails on my iPhone 5 - this is a recent problem, I have been able to reply and delete email messages previously.

    A bit more information would be needed to understand what's going on?
    What happens when you try to reply... Do you get an error message, is there no send button, does a symbol appear?

  • When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

    When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

    What kind of CD are you burning (Audio or MP3)?
    If you're burning an MP3 CD, the songs must already
    be in mp3 format.
    If not, iTunes will tell you that you have no songs
    in the playlist.
    M
    I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
    At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

  • My 160MB iPod Classic won't sync from iTunes.  This is a recent problem.  The error message is "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that music will sync but photos will not.  Current software on Mac and iPod.

    My iPod classic won't synch from iTunes.  This is a recent problem.  The error message reads "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync.  I am running current versions of software on the iPod and the iMac / iTunes.  HELP! J

    First try to resolve #2 by:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem
    If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.

  • Problem ripping CDs

    I have a problem ripping (or importing, don't know the difference) some CDs with iTunes. It goes very slowly and the songs are disturbed (sounds like you're jogging with a disc man).
    Strangely, I have this problem with all my Bruce Springsteen CDs (even soundtracks with one of his songs!), some classical and some Dutch CDs. I doubt if this has anything to do with copyright protection, because most of them are from the early 90s (and as far as I know, CDs weren't protected at the time).
    I can rip these CDs with WMP, a little faster but also slower than other CDs, but I'm not sure if you can import WMA-files into iTunes and if this affects sound quality on my iPod.
    Springsteen being (ironically) my absolute favourite, I would appreciate any advice you can give me.

    Not sure what the issue with the ripping is but yes you can transfer unprotected wma files to iTunes for Windows. Simply add the folder the library (file>add folder) and iTunes will automatically convert the file

  • Problem ripping DVD with Arch

    hi all !
    I have a big problem ripping DVD.
    I try with K3B ---> when I select the tack to ripp and click right to select copy, I got a lot of message in the console where I lanch K3B and that's all. The memory stay stable, no swap, hard disk stay empty but dvd drive was working. I didn't wait a lot (few minutes) then I stop. Is this think normal ? Do I have to wait or there's a problem ?
    This dvdrip --> I have this problem :
    An internal exception was thrown!
    The error message was:
    Error executing command identify -ping /home/nc/dvdrip/unnamed/tmp/unnamed-003-preview-clip1.jpg:
    identify: unable to open image `/home/nc/dvdrip/unnamed/tmp/unnamed-003-preview-clip1.jpg': Aucun fichier ou répertoire de ce type.
    identify: missing an image filename `/home/nc/dvdrip/unnamed/tmp/unnamed-003-preview-clip1.jpg'.
    at /usr/lib/perl5/site_perl/5.8.6/Video/DVDRip/GUI/Project/ClipZoomTab.pm line 910
    and this message
    can't read '/home/nc/dvdrip/unnamed/tmp/unnamed-003-preview-orig.raw' at /usr/lib/perl5/site_perl/5.8.6/Video/DVDRip/Title.pm line 2440.
    What can I do ?
    with gmencoder ---> Nothing append. When I say nothing that's mean when I click on encode, nothing append...
    So I took scripts I made some time ago (and was working) but console sended  me this error:
    DVD successfully opened.
    success: format: 0 data: 0x0 - 0xB895B000
    Selected DVD audio channel: 128 language: en
    Selected DVD subtitle channel: 1 language: en
    MPEG-PS file format detected.
    VIDEO: MPEG2 720x576 (aspect 3) 25,000 fps 6150,0 kbps (768,8 kbyte/s)
    [V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25,00 ftime:=0,0400
    Writing AVI header...
    ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
    Pos: 6,7s 168f ( 0%) 107fps Trem: 0min 0mb A-V:0,000 [0:0]
    1 duplicate frame(s)!
    Pos: 6,8s 169f ( 0%) 108fps Trem: 0min 0mb A-V:0,000 [0:0]
    Writing AVI index...
    Fixing AVI header...
    ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
    Video stream: 0,795 kbit/s (99 bps) size: 676 bytes 6,800 secs 169 frames
    PREMENCODE TERMINE
    hmm... help !?
    Namlook

    chmod u+s /usr/sbin/fping
    I think that error is because fping is not suid.  My /bin/ping is also suid, but dvdrip uses fping and you get a message like that if fping is not suid
    dvdrip-master
    will probably guide you to whatever is causing the error message.
    Do not use divx codec if you have a p4, there is a bug and another error message.  Xvid is better and it works but divx is set by default.
    dvdrip, allows cluster ripping, if you want to rip on in the world, use that.
    [/code]

  • Recent problems occurring with new iPod Nanos as well?

    Are the recent problems associated with the iPod firmware version 1.2 occurring with brand new Nanos, or are they only occurring with Nanos that were running previous versions that have been updated to the new version? I've been considering buying a Nano, but may reconsider if the problems are happening with new ones as well.

    I bought a 2GB iPod nano over the weekend. It works great, as long as I don't try to put more than 215 songs on it. iTunes crashes and freezes my iPod every time I try to fill it up more than half way. Every crash requires a hard shut down on my mac and restoration of the iPod.

  • Problems ripping with an external DVD Burner

    Hello Everyone,
    Recently I purchased a Liteon External DVD Burner off of newegg (http://www.newegg.com/Product/Product.asp?Item=N82E16827106011) -- It's a Liteon SHW-1635SX -- I bought this because the DVD-ROM drive thats in my tower natively is REALLY slow and I wanted to get a new one that I could use with a laptop that I`m going to purchase in the future. Whenever I try to rip a CD into iTunes using the burner, It says that it's ripping the disk, however it doesn't spin up the cd and it takes about 2 seconds to "rip" all the songs. I know this drive is soposed to be faster than my old one, But two seconds is a little TOO fast. Plus, I know that it's not copying the songs because when I try to listen to them in my library, the song won't play. (Under time it says "789:54..." for all the songs on the cd, in my library) However, the burner rips perfectly in Windows Media Player... Is this perhaps some kind of glitch with iTunes??? Basicly, the only way I can rip a CD into iTunes is to use my old DVDROM drive, but that defeats the purpose... below is the CD Diagnostic log that I got from iTunes::::::::
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    HP Pavilion 05 P9859A-ABA 533w
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.21.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1), PFC (2.5.0.196),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL Graphics Controller\Intel(R) 82845G/GL Graphics Controller
    IDE\DiskMaxtor4R060J0_________________________RAMB1TU0, Bus Type ATA, Bus Address [0,0]
    IDE\DiskST34323A_______________________________3.02___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomCOMBIRW16x10/DVD_______________________H1.0___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\CdRomLITE-ONDVDRW_SHW-1635SYS0Y, Bus Type USB
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
    Current user is administrator.
    E: COMBI RW16x10/DVD, Rev H1.0
    Drive is empty.
    F: LITE-ON DVDRW SHW-1635S, Rev YS0Y
    Audio CD in drive.
    Found 9 songs on CD, playing time 42:13 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:30:07
    Track 3, start time 08:44:33
    Track 4, start time 12:03:74
    Track 5, start time 17:55:53
    Track 6, start time 22:14:31
    Track 7, start time 25:32:60
    Track 8, start time 30:13:01
    Track 9, start time 35:59:06
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 16 24 32 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: COMBI RW16x10/DVD on -128(0xffffff80) media at speed 0X.
    Your replies are greatly appretiated!
    --Aric--

    hi Aric!
    hmmm. we'd better check on the usual suspects with that. (the incredibly long song times can also be associated with these sorts of causes.)
    You can't import or play music from an audio CD in iTunes for Windows
    ... and the following resources might be helpful with that. (check on firmware and drivers even though it's a brand new unit.)
    Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
    iTunes for Windows: Updating the firmware on your CD or DVD drive
    Updating the drivers on your Windows PC
    Where to find firmware for your CD/DVD drive
    love, b

  • Having some problems ripping DVDs

    I just recently bought a 30G 5th generation ipod. I downloaded Handbrake and it works great. I have already ripped several DVDs and transfered them to my ipod without any problems. However, there have been some DVDs that have problems with the audio. The video is fine, but there is static in place of any sound. I don't know if I need to adjust the Sample Rate or the Bitrate. Any suggestions?

    Have youy tried:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - iOS: Troubleshooting applications purchased from the App Store
    - Restoring the iPod from backup
    - Restoring the iPod to factory defaults/new iPod.

Maybe you are looking for

  • Closing GRNI document

    Hi Experts, I would like to have your thoughts on the below. I have an open Goods Receipt PO dated sometime last year and the period is locked. I need to close the document with current system date. In order to do that I have to open the posting peri

  • 13" MacBook Pro (mid 2009) hard drive and memory upgrade

    So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machi

  • 8220 Flip - trying to update OS from 570 error - constant BB restart - HELP

    Hi All, New to BB and have a problem here. I have an 8220 Flip and it started producing JVM errors now and again but reboot cleared them and all worked a couple of hours BUT this morning after rebooting I get the 507 error. I have researched this and

  • Connecting Switch to Router

    Greetings, I have a 3750 switch that has several VLANs defined on it. I also have an 1841 router that has the same VLANs defined (they are numbered the same). At the moment they are connected and I am able to browse from a host connected to the defau

  • Graphic driver for T22

    Hallo, I have installed Windows 2000 on my thinkpad t22. The monitor has a very bad resolution. I think I nead to install  a specific vga-driver for the graphic-card. But I can't find any vga-driver in the lenovo-page. Where I could find tha apropria