Recent problems with DRM errors despite Siverlight installed.

I have Love Film on the mac air and it has worked a dream until last Saturday. While I access the site easily and select something to stream it is coming up with a DRM error. I have checked everything in Silverlight and un-installed and re-insalled and check all the required boxes but nothing!
The only other chnage I made to the laptop was downloadng Mackeeper that same and perhaps it is a coincidence that I can no longer receive streaming since that time.

Installing MacKeeper and not being able to access Love Film may not be a coincidence. The concensus among expereienced Mac users is that the best term to describe MacKeeper would be malware. Check out these instructions to delete it. Reports are that the uninstaller the developer of MacKeeper provides doesn't perform a complete uninstall.

Similar Messages

My 160MB iPod Classic won't sync from iTunes. This is a recent problem. The error message is "The iPod cannot be synched. An unknown error occurred (-39)." The end result is that music will sync but photos will not. Current software on Mac and iPod.

My iPod classic won't synch from iTunes. This is a recent problem. The error message reads "The iPod cannot be synched. An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync. I am running current versions of software on the iPod and the iMac / iTunes. HELP! J

First try to resolve #2 by:
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing

Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

'File is already' open error in Excel, recent problem with ddeexec

We are getting an increasing frequency of errors when opening Excel files at my company. Our employees all use W7 SP1 32-bit and Office 2010 Pro Plus. We store files on a Windows 2008 R2 SP1 File server. The errors have occurred a lot in
the last 2-3 weeks, but weren't a problem before then as far as we know.
The error we are seeing is when you double-click to open an Excel file, you get the following message: "<file name> is already open. Reopening will cause any changes you made to be discarded. Do you want to reopen <file name>?"
When you open Excel first and then open the Excel file, the error message does
not occur.
If you have Excel open and double-click the file to open it, the error message does
not occur.
This only occurs when Excel is closed and you double-click the file to open it. There appears to be an issue with 'dde'
If you click 'Yes' to the error, the file will reopen and you can make edits normally & save changes. This error doesn't happen with all Excel files on our network. I think it may have to do with linked data. Some of these Excel files
look up to data on an Access database, for example. The database itself isn't 'open' by any user and neither is the Excel file. This isn't a 'file in use' problem.
I can hack the registry (see below) to get the error to go away (removing dde), but I'm looking for a more sustainable fix.
How do I get these errors to stop popping up?
I have tried Repair install of Office on a few machines with no success. When the issue occurs on a particular file, you can reproduce it on a different client. That is, it doesn't seem to be client-specific although you can 'fix' it by changing
how files open on the client machine. Again, this has been an error we are seeing a lot in the last 2-3 weeks.
[HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open]
@="&Open"
[HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\command]
@="\"C:\\Program Files\\Microsoft Office\\Office14\\EXCEL.EXE\" /e \"%1\""
"command"=-
[-HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\ddeexec]

The "Ignore applications that use DDE" checkbox was already cleared. Just to see what would happen, I tried selecting it and it gives this error when I try to open the file:
There was a problem sending the command to the program.
That is, if the "Ignore apps that use DDE" checkbox is selected, the file doesn't try to open twice, but it gives the above error and opens once.
(I know this isn't what you asked me to do, but I wanted to give you this information in case it was of any help.)
I am using Windows 7 and the File Types tab from Folder Options does not exist in W7. I did dig into the registry and adjusted the Open command for .xlsx files and removed "%1" as a test. This allowed me to open the file with no errors.
Working registry entry:
[HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\command]@="\"C:\\Program Files\\Microsoft Office\\Office14\\EXCEL.EXE\""
I also tried replacing "%1" with /dde. This also allowed me to open the file with no errors.
Alternative working registry entry:
[HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\command]
@="\"C:\\Program Files\\Microsoft Office\\Office14\\EXCEL.EXE\" /dde"
This still doesn't fix the root of the problem. This only started happening 3-4 weeks ago and the only fixes we've found so far are registry edits. I'd rather not have to push out these registry hacks to the entire company. The root problem
needs to be addressed!
UPDATE: the /dde didn't appear to permanently fix anything > Excel reverted back to having %1 at the end of the registry key

After installing firefox 4.0 I've been having problems with rundll error on startup. Norton scan is finding a high risk malware.

Last week I installed firefox 4.0 beta & the next time the computer was restarted a rundll error window appeared that said windows cannot locate file. This file showed up in the startup programs. When norton finds this which is every 1 or 2 days it removes it after a restart but the error & malware comes back. I went back to firefox 3.6 but still have this problem. Can you help?
Thanks, Dennis

It seems unusual that Norton should block and remove firefox updates. Having said that I was posting in a thread about problems with Norton a few days ago see [https://support.mozilla.com/en-US/questions/789617#answer-143767 thread] ''"I down loaded fromFFox the latest down - norton 360 - stopped the down load - stated not to use it - asked to stop running the program - I click yes thinking a problem now on my other computer I cant use FFox as a Browers -"''
I use Norton (NIS) and received only a mild advisory on one Firefox update. I have Windows XP with Firefox3.6.15 & 4RC installed

Problem with starting IWS6.0 after installing PHP

I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul

The error is pretty explicit about wha tthe problem is.
Look at the /tmp/https-dhcppc0-ab0d7966 directory. What are it's
permissions? They should be 700 for the UID iWS runs as. Here's mine:
[foobar@www /tmp]$ ls -ld /tmp/https*
drwx------ 2 root root 1024 Sep 19 16:46 https-admserv
drwx------ 2 nobody nobody 1024 Sep 19 16:49 https-www
Super-User wrote:
>
I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul--
Joe McCabe ... bleakness ... desolation ... plastic forks ...
House O' Mozilla

Recent problems with Windows Update with Thinkpad 8

Since last week I've started having problems with Windows Update on ny Thinkpad 8. It seems to be related with some recent update. At first I received different error codes. As I don't have many programs on my tablet, I refreshed it and set up Windows and Office again. I ran WU, and after the first update (with 100+ updates) WU was working ok. However, after a second set of updates (probably the most recent) I've started receiving error messages again. Most recently I am receiving code 80070002, and the error seems to affect only the installation of Windows Defender definitions through WU -- other WU updates install correctly, and most of the time I can install Windows Defender updates through Windows Defender. I have already tried the Windows Update Diagnostic tool, but the problem persists.

thanks farby

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

Problems with all Adobe sites + Dreamwaver install

Hi
Sorry to post here - the first half of this topic is general,
the second half is Dreamweaver.
1. I have been having loads of problems with Adobe websites
a. could not get into Dreamweaver Trial download page because
my IP was blocked and I am no spammer!
I had to disguise my IP in order to download it - it seems
they do not want my money!
2. Now in the forums, anything I search I get a error:
Error Occurred While Processing Request Variable
FTVAR_RESULTTYPE is undefined. Resources:
* Enable Robust Exception Information to provide greater
detail about the source of errors. In the Administrator, click
Debugging & Logging > Debug Output Settings, and select the
Robust Exception Information option. * Check the ColdFusion
documentation to verify that you are using the correct syntax. *
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB;
rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5 (.NET CLR 3.5.30729)
Remote Address 10.172.32.23 Referrer Date/Time 28-Jan-09 08:48 AM
It looks like they have a problem with Firefox 3.0.5 ?
Also sometimes pages do not load, I get a blank page, the F5
and it loads!
DREAMWEAVER
I have 'tried' to install CS4 (I do have MX2004 (time to
upgrade!) and I got a 'Found Trojan Horse Crypt.CFR' from AVG!
So, I have now stopped.
Since I cannot search the forum I had to open a topic.
Sorry again.
Any idea?
Regards all ...

> 2. Now in the forums, anything I search I get a error:
> Error Occurred While Processing Request Variable
FTVAR_RESULTTYPE is
> undefined. Resources:
use the Advanced Search option in the web forums, or use the
google groups
search to search the macromedia.dreamweaver NNTP archive.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Problems with apps and safari since installing Yosemite

I could have shot myself after installing Maverick when it cam out but after a zillion updates and finally a 100 mile drive to the nearest Apple store and the genius bar it seemed to be working fine. I dreaded installing Yosemite but as I have and iPad mini, and Yosemite is billed to work more harmoniously with that, I did the download. Since then and even following the recent 'update', opening Safari takes forever, I get the rainbow wheel of doom. There is frequently a delay between my typing (about 35 words per minute) and actually seeing the curser and letters on screen, and often webpages just dump. Other times, apps or webpages will just spontaneously pop open. Sometimes Safari can't connect to pages. Not my wifi as if I just choose another page it is fine. I am actually back to using Chrome because I don't seem to have the same problems as with Safari..... go figure. 5 years ago after years of pc's and the frustration of having hardware and software that were specifically made for each other, I thru in the towel and paid the bucks for a MacPro laptop and I loved my first three years. Now, my machine ***** as does Safari!! an Apple app! I feel like I need to debug, but I don't have any thing like MacKeeper on it now (the Genius bar guy took MacKeeper off when I had that visit to solve the Maverick problems). I'm tempted to reinstall it but I read so many posts saying that folks had problems with a virus that they attributed to MacKeeper. So, anyone else having these same problems and can anyone recommend a good cleanup and maintenance software so I can clean this up?

Do not install MacKeeper.
Back up your Mac if you have not already done so. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
Determine if the same problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Problem with repair error 1311, and trouble reinstalling.

I am having problems with reader, so I tried to do a repair but got error 1311. I uninstalled not im having trouble reinstalling...

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

Iphone problem with itunes error 1603 on restore

I allowed my iphone battery to fully discharge and upon recharging got the error message with a large exclamation mark “please connect to itunes”. When I connected to itunes I was told that the phone was in recovery mode and needed to be reloaded. Itunes went out and downloaded the new firmware and began the install process after I approved the input screen that said it would wipe out all my data. 1/3 of the way through the process I received a message box that told me the process had failed to restore the iphone for an unknown error (number 1603).
After looking online and calling ATT as well as Apple the best solution I received was to send the iphone in for replacement (i am 5 hours from an apple store). After fiddling around I have managed to solve the problem on my own.
After trying everything else with no results, I pulled the SIM card out of the iphone and plugged the iphone into my computer. Itunes then reloaded the software and firmware successfully. I then put the SIM card back in and synced it up with itunes and it asked me to confirm the resync. Afterwards it just worked fine.
My iphone works again!

"1- suddenly my iPhone 5 lost mobile company signal and word searching appears instead but no signal for the hole day so I changed the sim with other provider and since it gave me the same result I searched the web and the seems no solution other than restore.
I did restore and update to iOS 7.0.4 but at the restore takes at the last 1% in the last moment of restore it will take loooong time then gave me error 3. And now for more than a month the iPhone stuck with recovery logo. Almost I tried every trick in the book . Change USB cable, port, PC. PC with other OS . Even freezing the iPhone as I read here noooooo result the same happened again and again."
I have exactly the same problem with my iPhone 5s!

Recent problems with DRM errors despite Siverlight installed.

Similar Messages

Maybe you are looking for