Recent questions on control panel busted?

Just curious. I don't ask many questions, so it looks to me like it stopped adding sometime after March 20.
Edit: Funny, this one shows there, but the other one I asked in XE forum didn't.
Edited by: jgarry on Jun 15, 2012 9:28 AM

jgarry wrote:
Just curious. I don't ask many questions, so it looks to me like it stopped adding sometime after March 20.
Edit: Funny, this one shows there, but the other one I asked in XE forum didn't.And the search index has not been maintained for a week or two. Try searching for anything using the "Last 7 days" range...

Similar Messages

A question about control panel.

Click the up arrow on the control panel,then,pop up the subpanel.I want to create a password dialog before pop up the subpanel,only you put the right password,the subpanel was popped up.
what shuold I do?thank you.

Hello, I'm interested by your question JSL because I meet quite the same problem with my HP HDX 16 1050 EF with Vista Home Premium SP2 64-bit.
With the first audio drivers that came with the computer, I couldn't disable SRS settings because Windows sounds were totally distorded...
And when I left default parameters, many musics were saturate because of the SRS...
I've updated IDT Audio to v1.0.6225.0 (july 2009) via Windows Update. There are no more SRS but Dolby Natural Bass. Now I can disable it without any sound problem but each time I plug headphones or restart computer the dolby natural bass option light on...
How can I disable it definitely ?
Please help us !

HT1349 I have icloud on my pc with windows vista. Recently, upon startup I receive an error that says applephotostream.exe has stopped working. Windows will close this problem . . . any suggestions. I tried to download the control panel again. no luck

I have icloud on my pc with windows vista. recently, upon startup I get a message that says applephotostream.exe has stopped working. Windows will close this program . . . I tried re-installing the icloud control panel, etc. to no avail. any leads?

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

I recently downloade Firefox v6.0 but had to remove it via the Control Panel Add/Remove Program. When I tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copy of v6.0.

I recently downloade Firefox v6.0 but had to remove it via the Control Panel>Add/Remove Program. When I downloaded v6.0 again and tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copyof v6.0. However when I did reboot I get the same error message. I'm sort of stuck in a loop and can't figure out how I can re-install v6.0. I am running Windows XP on a Dell Inspiron 9300 laptop.

Please do the following.
Click '''Help '''| '''Check For Updates'''. The option to update should appear and version 3.6.17 should download and install.
However, sometimes things go pear-shaped and you get version 3.5.19. If that happens, repeat the same steps to update to 3.6.17.
Once you have 3.6.17 installed, you'll get the opportunity to update to the current version which is 4.0.1 ''Please don't do that for the moment because you first of all have to update your plugins''. To do the latter, please do the following.
Go to http://www.java.com/en/ and install the latest version of Java.
Update Adobe Shockwave for Director via http://get.adobe.com/shockwave/
Update Adobe Flash via http://get.adobe.com/flashplayer/
Update Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
For security details regarding the Adobe updates, see: http://www.adobe.com/support/security/advisories/apsa11-02.html
Once you've updated all those, go to '''Help '''| '''Check For Updates '''again to update to version 4.0.1

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

I upgraded the cloud control panel and now i dont have any of the songs in my itunes library except purchased songs

i recently upgraded the icloud control panel because it popped up and told me there was an upgrade. once the upgrade finished i opened itunes and the only songs that were there were songs that were in the cloud all my previously added music from my cds was gone. i was going to talk to apple support but they want a serial number for the apple product which i dont have because my question is for itunes on my windows laptop.

See this post.
tt2

K7N2 audio control panel problems

Help! ive just recently bought this nforce2 motherboard, installed win98se fresh, and installed all of the drivers, however i want to enable 4 speaker mode, and the manual says to use the nvidia control panel, my panel wont open, it comes up with could not initialize audio drivers, the sound at the moment is stereo and seems ok, so whats going on here?
ive got the latest v2.00 drivers and here is my pc spec
Athlon 1700+
256mb pc2700 ddr single stick
40gb 7200 hdd
radeon 7500 64mb ddr
16x liteon dvd drive
4x cd writer (pants)
not the fastest machine ever but it does ok!

Yes, this is what I thought also. But I don't think it does. It has the s-bracket JSP2 connector but it (s-bracket) doesnt work.
It really doesnt matter now though as you can see I listed it on ebay with my old cpu. I will likely buy me an EPoX 8RDA+. It outperforms the 6570 in performance and has all the bells and whistles.
MSI has some horrible customer service. However, I must admit you have been very responsive and helpful but, you are not live tech suport.
I do appreciate it nonetheless. :D
I called their support long distance number and was on hold for about 45 minutes, off and on, and the last time I was on hold I put my phone on speakerphone and went in the other room. The guy came back on said, "hello sir? Hel..Click!" I didn't have time to say anything! I was so pissed I wanted to take my motherboard back right then. He kept having to ask other people questions about my problem. It was just plain rediculous. That is just one of the reasons this motherbaord is on ebay. I about to put my MSI Geforce4 4600 vtd on ebay also because I dont want to have to deal with MSI CS.
Thank you again, for all your help

How can i set up icloud control panel on a microsoft surface 2 with windows rt 8.1

How can I setup icloud control panel on a microsoft surface 2 with windows rt 8.1.

I apologize for semi-hijacking the topic of this thread from "Multiple iCould IDs with single AppleID. Possible?"
Perhaps my reasoning for doing this was flawed, but here it is. That thread was started back in June when the real details of iCloud were somewhat conjecture. It is now about 14 pages long. There are some recent posts to the thread, but for the life of me I can't tease a solution to my question above out of them. I just may not be reading carefully enough. If so, I apologize.
What I am looking for is more of a STEP BY STEP guide to setting up iOS 5 and OS 10.7.2 for a family in my situation with my needs. I think I do represent a fair segment of users.
If the monitors of this forum think my thread should be tack on to the end of the above mentioned forum...by all means do so.
Honestly, If Steve were alive today I think he would not be happy with this situation faced by Apple customers. Steve always said his guiding mantra for his products was..."It just works." I honestly believe he meant that. But, with regard to this iCould business...for normal pedestrian users like myself, I would have to say, "It just doesn't work."

Admin Control Panel Password Reset

Hi guys, I need some help as I am currently unable to access my control panel of my wireless hp laserjet p1102w printer. I have recently took out a new internet service provider and unable to even log into the control panel to input the new wireless settings! I have forgotten the password I had set for the control panel upon initial installation and desperately need some guidance on how I can reset the password for this machine! Please help as I currently have a printer which I am unable to use to its full potential Regards, Kad
This question was solved.
View Solution.

Hey Kad,
It looks like your printer needs to have a reset performed to it. This will reset the device to a factory state, but will not affect page counts, service IDs, or other static product values.
I will send the information to perform this reset to you in a private message. Please read Bob_Headrick's thread on printer resets, found here, prior to performing these steps.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Virtu Control Panel issue with Z68A-GD80

Hello,
I am a reviewer for PC Labs (http://www.pclabs.com.tr) and I've been evaluating the Virtu software for some time now. I have the following problem:
This error shows up whenever I try to start Virtu. If I click Yes, it just pops up again, infinitely. If I press No, Virtu quits.
Yes, I read the Virtu installation guide section
Motherboard BIOS is the latest. I'd been trying the previous ones as well.
As stated in the manual; I first installed Intel HD Graphics 3000 drivers, then added the discrete VGA card, let Windows install the drivers, then installed Virtu
I also tried all possible combinations of driver installation with and without Windows Update - manually installed VGA driver from AMD, let Windows install HD Graphics 3000 driver, etc.
I tried multiple versions of Virtu; from MSI download site, from Virtu directly, etc.
Re-installed Windows and done the same, no luck
Here's the rig:
- MSI Z68A-GD80 motherboard with most recent BIOS update available at the date of this post.
- Intel Core i7-2600K processor
- Radeon HD 6870 discrete card
- 4 GB Kingston DDR3-2000 (also tried with Kingston HyperX DDR3-2133)
- Seagate ST3250410AS & Kingston 120 GB SSD
- Thermaltake Toughpower 875 W PSU
- Windows 7 64 bits with SP1
Any ideas?

Quote from: Jack on 22-August-11, 20:29:33
Done.
Thanks for the extra hand, Jack.
Quote from: Jack on 22-August-11, 20:29:33
Two related questions for clarification:
Which version do you have exactly?
---> http://eu.msi.com/service/search/?kw=Z68A-GD80%20&type=product
... B3 or G3?
Which version is that exactly? (Exact version ID)
The version will be different, depending on the motherboard variant you have.
In addition to that, there are always BETA and Final Releases. In case you are referring to the latest Final Release, an even never BETA Release might already be available which does not appear on the board's product site.
The board is a B3. 7672 Ver. 3.0 exactly. As for the driver & application versions:
- Intel HD Graphics 3000 was tested with drivers from MSI and also from Intel. At the time I started this topic, the installed driver was 12.22.1.64.2361 (8.15.10.2361).
- AMD drivers tested (with Radeon HD 6870) were 11.6, 11.7 and finally, 11.8.
- Virtu software versions tested were: First was from MSI (can't remember the version number right now), 1.2.105, 1.2.106 from LucidLogix
- Motherboard BIOSes tested were: Initial BIOS (2011-04-25 date), 17.1 (7672vH1 ROM, date 2011-05-30) and for the time being, 17.2 (7672vH2 ROM, date 2011-07-18).
Quote from: HU16E on 23-August-11, 03:57:21
In the Virtu Control Panel, 'About' Tab, does the Virtu version appear, or does it say Trial Version?
Added: After reading & following the MSI Software Application Guide v1.3, & using the Virtu drivers off the install disk that came with the mainboard, I had flawless performance using Virtu. My mainboard was shipped with the initial UEFI release (17.0 for a B3). The Lucid Virtu license key was enabled right from the beginning.
The Virtu Control Panel never shows up. When the system boots up and I login to Windows, the error message I mentioned is shown. Clicking "Yes" results in the same error; clicking No quits Virtu. The same happens when I manually start the Virtu Control Panel app.
MSI SW App. Guide and software from the install disk didn't work for me. :( I don't think it's the Virtu license key because Virtu is actually *active*. I do get the Virtu logo on 3DMark Vantage (and possibly other 3D apps registered to Virtu) and get discrete card class results from the benchmark in i-Mode. Besides, I believe Virtu software doesn't mean to say my license key is missing. Please see below.
You could make it, then I'd like to ask you a favor. There should be two files in a LucidLogix folder, located in your User directory:
Code: [Select]
{Your_Drive_Name}:\Users\{Your_UserName}\LucidLogix
The files are lucidloader.ini and userSettings.xml.
Could you post those two? As far as I could deduce, there shouldn't be any personal information in those files. Just general settings and application profiles. The error seems to stem from a disrepancy between these two files. The software seems to look for some "keys" from the XML file (where settins and app. profiles are stored as "keys" like <key>KeyName</key>. I'll attach my files a few minutes later. Check the userSettings file; around the end of the file, you'll see the word "general". My bet is on that one.
Of course, while I quoted HU16E, Jack and anyone else interested is welcome in this discussion.

CS4 - In InDesign can I change the Control Panel????

I have recently upgraded to InDesign CS4 and I'm finding that my Control Panel does not match the one I used in CS3. Is there a way of adding tools to the Control Panel? Or changing the Control Panel?
For example when I have text selected the Character Formating Controls offer: font, font size, leading, some options like superscript & subscript, alignment, indents, space before & after, drop cap, bullet list & number list. When I switch over to the Paragraph Formating Controls I get the exact same items just in reverse order. How do I add kerning, horizontal scale, the hyphenation box, and more. I'm noticing similar issues when I have an object selected, where is my "fit frame to" options?
It seems with CS3 I had so much more available, is there any way to get CS4 to be set up in the same way?

More options appear on the Control panel if you choose the Advanced workspace instead of Essentials. Choose Window > Workspace > Advanced.

Java Control Panel wont open at all and any Java Applets crash web browsers

Hello,
I recently installed a fresh fully updated copy of Windows 7 Home Premium 64 bit, and I have not for the life of me been able to get Java working at all. Java version is the latest JRE 6U31. I only have Internet Explorer 9 installed but I doubt it is a browser issue since I cannot even open the Java control panel. I have tried using the 32 bit version of Java, and the 64 bit. Anytime I try to open the Java control panel with either 32 bit or 64 bit, I get an error message (click link below to view error message):
http://i65.photobucket.com/albums/h204/gobigjeff/Java%20Error/javaerror.png
I can only bring up the Java Control Panel using the command “javaws –viewer” . Anytime I try to load a web page with a Java applet in either 64 bit or 32 bit, it freezes and crashes. I am running Internet Explorer 9 and have tried both the 32 bit and 64 bit browser versions. I saw Java’s recommendation to only use the 32 bit version so I have mainly been trying to get the 32 bit version working 1st, with no success. I have tried ALL of the following steps, and have done some exhaustive research on this problem. It seems others have had this issue as well, with no solution to be found:
•     Uninstalled and reinstalled only Java 32 bit JRE 6u31 multiple times (Used Javara and reg cleaner to remove all old Java traces)
•     Uninstalled and reinstalled only Java 64 bit JRE 6u31 (Used Javara and reg cleaner to remove all old Java traces)
•     Uninstalled and reinstalled bit JRE 7 (Used Javara and reg cleaner to remove all old Java traces)
•     Used SFC /scannow in safe mode to verify Windows files
•     Ran spyware and virus scan with no issues detected
•     Added all java processes to windows firewall
I am out of solutions here. If anyone has had this problem with Java or knows what I need to do to fix the problem your advice would be greatly appreciated. I don’t think reinstalling windows is the solution because this is a fresh install.
Edited by: 918650 on Mar 4, 2012 1:16 PM

I figured it out. I changed the installation folder to C:/Java and it finally worked!

My Air Drop feature is not working. I have an iPhone 5S running iOS 7.0.3, my wifi and blue tooth is on and I am set to "everyone" in control panel. I am not able to see anyone in the AirDrop box to be to share pics or contacts.

My wifi and Bluetooth is on, in control panel I have "Everyone" on, I cannot see other iOS devices that are using iPhone 5 or 5S. My phone is only a couple of weeks old and was purchased brand new and I am on AT&T. I can not see other devices and other devices can not see me. I checked the manuel and I don't see any other settings other then what I described above in regards to control panel. Anyone have a solution for me? Oh by the way I have rebooted my phone, did a hard reset 3 different times but still not working. I do have an active iClould account.

I read a previous blog from a Mac user who was having an AirDrop issue. He resolved it by deleting his icloud account and reinstalling it. I figured what will it hurt to try this with my iPhone 5S. Well I am happy to say it worked. I recall recently changing my Apple ID password. This must have affected the Airdrop feature. When I reloaded my IClould account it started working. I don't know why but it's something you can try if all else fails. Hope this helps someone.

Tasks/Reminders added from Outlook (iCloud Control Panel synced) can't be checked off as completed on iOS

I have Outlook on my PC, and can interact with the iOS reminders/tasks through syncing with the iCloud Control Panel. However, if I add a task/reminder this way I have been unable to mark the reminder as complete on my iOS devices (iPhone and iPad). The reminders show up, but clicking on the circle to the left of the task just updates the UI (fills in a circle). If you exit the reminders app or Today screen and go back, the task still remains uncompleted in the list.
Has anyone else seen this? Right now, from iOS, I can only get rid of the reminders by deleting (instead of completing) them ... which is not ideal.
Current Configuration:
iPhone 5s with iOS 7.1
iPad Air with iOS 7.1
Outlook 2010 on Windows 7 with iCloud Control Panel 3.1

Hello desert_dweller5,
It sounds like you art trying to access a Shared Photo Stream, but you do not have one of the devices to enable your Apple ID as an iCloud account. The following article provides information on how Shared Photo Streams work:
iCloud: Photo Stream FAQ
http://support.apple.com/kb/HT4486
The article states that for privately Shared Photo Streams to work, the recipient will not only have to have an Apple ID, but it will have to be an iCloud account:
Friends and family with iCloud accounts can view your photos in the Photos app on any device using iOS 6 or later; on a Mac in iPhoto 9.4 or Aperture 3.4 or later; on a Windows PC with Windows Vista or later and iCloud Control Panel 2.0 or later installed; or on a second generation or later Apple TV with software version 5.1 or later installed. They can also view your photos on the web if you enable Public Website in the settings or options for your Shared Photo Stream.
Since you do not have an iCloud account and just and Apple ID, your friend can share the photo stream as a public website so that you can view it, as stated in the same article:
Can I share with people who don't have an iCloud account?
Yes. If you enable Public Website in the settings or options for your shared photo stream your photos will be published to a website that anyone can view in an up-to-date web browser.
To be able to change an Apple ID to an iCloud account, you would need an iPhone, iPad, or iPod touch with iOS 5 or later or a Mac with OS X Lion v10.7.4 or later as stated in the following article:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/HT4436
Best,
Sheila M.

Windows XP on Macbook Pro - Control Panel settings

I've been a Windows user for years, and now find that I still require my Toshiba laptop on my desk beside my Macbook Pro.
My problem today wih the MBP is problems while in Windows XP with the Control Panel. I continually reset the regional time zone settings, apply, and the computer resets back to its "own" region as soon as it is shutdown. The settings won't keep also if using screen savers, etc. in the Windows environment. I've looked through the questions in the forum, and this seems to be minor and of no problem to anyone else, but I am totally frustrated. Any help is greatly appreciated!
I also thought the infrared in the MBP which allows use of the remote, would also work in Windows. It does not which creates a problem for accessories that require infrared transmission which won't transmit on the MBP in either environment. Back to the old computer for that problem.
Thanks.

I would make sure that you have run the latest MacBook Pro Firmware upgrade from the apple support site
http://www.apple.com/support/downloads/macbookproefifirmwareupdate12.html.
This may fix certain issues with those settings not saving. Also try resetting the PRAM. From what I have been told the infrared port on the intel Macs only works with the Apple Remote.
Hope this helps.

Recent questions on control panel busted?

Similar Messages

Maybe you are looking for