Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users

There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4.  Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?

I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems.  Everything is smooth as glass at the moment.

Similar Messages

  • New software update available for Nokia C2-02 and ...

    Hey,
    There's a new SW update available for Nokia C2-02 and Nokiw C2-03: version 7.63. These device models are also sold as C2-06/C2-07/C2-08 on certain regions. The update is already available via Nokia Suite, FOTA update should be coming out sooner or later as well. I will post an update about the here later on.
    Key changes:
    A warning is now given when the volume is too loud
    Improvements to the display brightness
    Can now unsubscribe from the Tips and Offers service
    Timezone fix for Russia and Argentina
    Fix for device camera sometimes crashing during taking photos
    General usability & performance improvements
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

    Hi iluyimbazi
    Thank you for posting and welcome to Nokia Support Discussions! 
    Try to reinstall the software of your Nokia C2-02. Using Nokia Suite click on Tools > Software update > Reinstall.
    If in case you can't reinstall the software, try doing a master reset. Go to Menu > Settings > Restore factory settings > Restore All.
    Note: Create a backup first before doing any kind of reset to avoid deletion of data. If prompted for a lock code, enter 12345 unless you changed it.
    If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

  • I keep receiving the software update recommendation for Firefox 5.0 "strongly recommended." However, each time I attempt to download it, the download lasts for ever and is unproductive. What's up?

    I am running Mac OS 10.6.8. For the last few days I have received the Software Update with strong recommendation to download Firefox 5.0. However, each attempt to download fails....the progression bar just keeps stalling.

    muneer86 wrote:
    hi, i have iphone 4s with version 5.1.1(9B206). im unable to update the version to ios 6? if im updating my phone in middle it says this an error occur while updating . can anyone help me to update my phone to latest version?
    Follow the instructions that were already given in this discussion.

  • Aperture, iPhoto, Mail, FCP X, Motion and Compressor suddenly kaput!

    Yesterday I discovered that Aperture and iPhoto, which I hadn't used for several weeks, were refusing to open and throwing up an error message saying there was a "problem and they probably weren't compatible with this version of the  operating system etc."
    Shortly after, I discovered that Mail and the latest versions of FCP X, Compressor and Motion were also disabled.
    After searching the internet/forums it appeared that this problem (with Aperture) could be caused by installing FCE 4, which I had done a week earlier and the only cure was to reinstall the OS.
    I deleted FCE 4 and went through all the usual troubleshooting strategies to no avail so I reinstalled OS X 10.8.5 which which took less than an hour and luckily appears to have cured the problem. (I had been dreading reinstalling the OS  as I mistakenly assumed it would wipe all the apps and folders off my Mac ......... but of course it didn't.)
    So has anyone had a similar experience or can shed any light on this?
    Now I have to decide whether I dare reinstall FCE 4 ...........

    Quite a few bug fixes, like the text position bug in Lion has been fixed.
    Here's some from Tim Payton on the COW
    - During Playback, zooming the timeline with the keyboard doesn't send you to the end of the timeline
    - Scale controls on timeline now update live
    - Synchronize Clips now works if you have multiple non overlapping video clips for a single audio clip. (huge!)
    - Preroll and Post Roll settings in preferences work.
    - HDV Footage with "better performance" doesn't look nearly as bad. Way less flashing.
    - Timeline feels much snappier.
    - Timeline index now includes sortable columns: name, roles, & notes, and you can edit the values! (huge!)
    - Zooming on the timeline now really centers on the playhead if skimming off, skimmer if skimming on
    - Inspector updates more consistently to the clip selected.
    - Startup is much faster.

  • How do I retrieve apps and books that were lost in recent software update for my iPad?

    Is it possible to retrieve lost apps and books in recent software update?

    Yes it should be possible deppending on your  version of ios on your ipad. In the app store you can go to "purchased" and download any apps you've previously purchased. I'm not sure if this will also work for books or not. Also, if you haved synced your ipad to your computer, itunes will have all your data (books, apps, music etc...) and you can load it all back up.

  • Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

    Hi there,
    Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
    Dear Apple,
    I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
    Please see attached file of the error message coming up in the print queue.
    I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
    I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
    Regards
    Brian
    PS i obviously can't attach the error message so here it is:    Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
    Thank You all in advance
    Regards
    Brian

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • After doing a recent software update, my macbook can't bring up Safari. I get a problem report for Safari with a lot of tech words/numbers

    After doing a recent software update, our macbook stopped opening up Safari.  We keep getting a problem report for Safari.  How do we fix this?

    Please copy and paste the entire report in your Reply. That should reveal what the problem is.
    No need to send anymore reports to Apple. One is sufficient. It's only for the developers perusal.

  • I would like to reload the recent software update for iPad.  When bringing it back up I skipped the Apple ID step and should not have.

    I would like to reload the recent software update for iPad.  When bringing it back up I skipped the Apple ID step and should not have.

    You can sign in at the iTune and App Store.
    Settings>iTunes and App Store>Apple ID

  • What is the most recent software update for mac

    I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M

    Michaelbe3 wrote:
    I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M
    A really recent MacBook Pro would be running Lion, Mac OS 10.7, and the most recent update is 10.7.3. The delta update from 10.7.2 was found to cause problems and rather than fix them, the update was pulled and Lion users were directed to the "combo" updater which contained all the code necessary to update any Mac running Lion from any previous version of Lion, which is a lot of code, hence the very big download. BTW, 10.7.3 has been problematic for some software so it would be wise to explore the comments and complaints in the Lion forum before you update since you can't go back if you change your mind without having a good backup. Also BTW, this forum is for the Mac Pro; you have a MacBook Pro, which has its own forum and can probably provide you with more useful information.

  • HT1338 I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

    I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

    I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Phone not responsive after recent software update

    I have just updated my phone (iPhone 5) with the most recent software update and it's now "died".  It was 100% charged and I'm now faced with an unresponsive phone which just shows the "plug to iTunes" visual.
    Anyone else have the problem and know how to resolve it?
    *Frustrated*
    PS did it for my iPad and it went through no problems.

    You're right.  Just tried for the sixth time.  Thank you.  What a productive Monday afternoon!

  • Flash player not working after recent software update

    I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
    I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
    I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
    I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
    Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
    I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.

    Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
    But as long as the problem is resolved, I'm happy. :-)))
    Thanks anyway!

  • Lexmark P6250 scanner not working with iMac after recent software update, any ideas?

    The scanner has always worked with the iMac but after a recent software update only the printer works now.  I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
    When I load print and scan from system preferences, I select to open the scanner and the process just hangs.   I can see the scanner and am able to select to open but not able to scan.
    Any ideas on how to resolve?

    Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
    I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs.  I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error".  When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
    All features were working fine prior to conducting a software update about 8-10 weeks ago.  I have downloaded further software updates which I had hoped would sort this issue but it hasn't.

Maybe you are looking for

  • Multiple game center accounts for single appleid?

    I have 2 iPhones and an iPad for family members. I use my Apple ID to manage them. How do I assign a game center account to two other family members different than  the one I use to  manage the devices? I'd like to play games against them but we can'

  • Driver issue in Device manager

    I can not find the driver that goes with the PCI Serial Port in the device manager? How can I find this driver for an Elitebook 8460p?

  • I had to reinstall iTunes, and now I can't transfer all my songs!!!!

    Hello everyone, this is my first and hopefully only post, assuming that I have no more problems with my iTunes/iPod. Ok, I recently had to have a new hard drive installed in my computer, and I got it back today. I had to reinstall iTunes, and after d

  • My MBP from feb 2012 is very slow and crashes a lot?

    I have a mbp from 2012 with crashes a lot, even when i am doing absoluutly noting. opening a tab in safari or doing other simple tasks. My mb just crashed again, my question is if anyone has an idea what the panic reports meens? Interval Since Last P

  • Slow AFP after Security Update

    Hi! We're a small company running an OS X Server for file sharing. Yesterday I installed the Security Update 2009-004 (Universal), which fixes some AFP, DNS stuff that is way above me. After reboot the AFP service wasn't running, so I started it. But