Recent upgrade of MAC to OS X Snow Leopard.  Using a kodak easy share 2730 digital camera will not download as pix.  States cannot read  Have I Photo 08 7.1.5.  Is this the problem?

Recent upgrade of MAC to OS X Snow Leopard.  Using a kodak easy share 2730 camera cannot open pix in I Photo.  States cannot read  Presently have I Photo 08 7.1.5 .  Does this have to be upgraded?  No problems downloading from this camera previously

There's a long standing issue with Kodaks and OS X. Workatound: use  a USB Card Reader.
Regards
TD

Similar Messages

  • I just upgraded my mac book pro to snow leopard, now my I photo library dissappeared

    I am a novice in all things technical and I need some help figuring out my I photo library.  I bought my Mac Book Pro in 2009 and shared/transferred all information from my G5 (2004) to my laptop.  I Photo was also transferred and I have started to add more photos to this laptop.
    I just upgraded my mac Book Pro to Snow Leopard and now when I open my Iphoto library it shows  some of the library but now all.  My husband said it is still there but the system is not able to look in the right place due to the sharing...so I am totaly confused?????
    WHen I go to the Information it syas it is Where: /users/shared
    Under sharing and permission it says: You have custom access
    vivianlie read and Write (but this is in light gray)
    Everyone (also in light gray)
    NOW: My old and faithful G5 all of a sudden is telling me this morning that in order to open I photo I
    need to upgrade to work with this verion of I photo
    Your photo library will not be readable by previous versions of I photo after the upgrade.
    What should I do now?
    Thanks so much for any tips and ideas...

    On you MBP try the three fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
    Select the options identified in the screenshot. 
    Fix #3
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    On your G5 make a temporary, duplicate copy of the library and run the same 3 fixes. 
    OT

  • HT3500 I upgraded my operating system to Snow Leopard 10.6.8 and now my Lexmark X4875 will not print wirelessly and neither Apple, Lexmark or Belkin can work out why. Has anyone else experienced this and knows what to do? Thanks

    I upgraded my operating system to Snow Leopard 10.6.8 and now my Lexmark X4875 will not print wirelessly and neither Apple, Lexmark or Belkin can work out why. Has anyone else experienced this and knows what to do? Thanks

    You launched iPhoto and from its Preferences you selected Connecting camera opens.....

  • HT5988 When upgrading my Mac from  OS X Snow Leopard, to OS X Mavericks, The installer displayed my parallel and my PC applications. How can i get them back?

    When upgrading my Mac from  OS X Snow Leopard, to OS X Mavericks, The installer displayed my parallel and my PC applications. How can i get them back?

    You either have to restore the Snow Leopard backup you made prior to installing Mavericks, or create a separate Snow Leopard partition to boot to in order to run your older PowerPC applications.
    Either that, or upgrade the apps which won't run in Mavericks to newer versions that do.

  • I need a driver that will work for my Sony DSC-S50 camera, I took my Mini to the Mac store to eject two CD's stuck.  Now my camera will not download to iPhoto like it did before.

    I had to take my Mini to the Mac store to retrieve a disc stuck in the drive now my camera will not download into iPhoto.  I have a Sony Driver Disc,but when I try to open the disc I get a error message "Classic environment is no longer supported".   I have OSX 10.6.7 what has changed?

    I'm sorry, but there is no 10.7.5 - do you mean 10.4.x or 10.5.x or 10.6.x?
    I asked because 10.6. (which you have now) no longer supports the classic environment, but previous OS's did. So, if the store "upgraded" you to the latest OS when you had it in for repair, then that would be the reason. So, if you can't remember which OS version was on it, I would call or go to the store and ask if they changed the OS version. Now, I'm not sure what a Sony Driver Disc is - do you mean it's the software that came with your camera? Depending on the format of your camera cards, you should be able to use a USB card reader instead which might be easier to deal with.

  • Before iOS 7 I had previous ringtones I made from songs I purchased. Now they will not download to updated version. Says error... Why? Can this be fixed? I want my music ringtones back.

    Before iOS 7 I had previous ringtones I made from songs I purchased. Now they will not download to updated version. Says error... Why? Can this be fixed? I want my music ringtones back.

    Hi there.
    Thank you very much for your quick reply, it's really appreciated.
    No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
    I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
    While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
    I guess I need to fire up my PC and download it / sync my iPad.
    Thanks again for your help

  • My IPad disconnected from my home WiFi and will not accept my password.  Does anyone have any ideas on how to fix this?

    My IPad has disconnected from my home WiFi and will not accept my password.  Does anyone have any ideas on how to fix this?

    I would
    1. turn off the router for 30sec and connect it to see if it fix it
    2. restart the ipad by holding down the on and home button and use the slider
    3. update the firmware of the router

  • HT1291 i had upgraded my mac book pro to snow leopard but the cd /dvd is not working on this os

    hi,
    I had upgraded my macbook Pro with a snow leopard os and added parallels and windows 7 prof , but the cd/dvd is not detecting please help me out

    Jain.vikas wrote:
    hi,
    I had upgraded my macbook Pro with a snow leopard os and added parallels and windows 7 prof , but the cd/dvd is not detecting please help me out
    When you use a virtual machine software, it can "take over" the optical drive for the virtual machine operating system, so the disk won't appear in OS X or on the desktop. You need to disable the virtual machine from accessing the optical drive. Usually if the virtual machine is not booted up, then control returns to OS X for the hardware.
    If the disk is not appearing in Windows, it's because you need to enable the virtual machine to access that piece of hardware.
    First use the Apple Menu to Software Update 10.6.3 to 10.6.8
    Next update Parallels to the latest version, if you get a grey screen and the Mac refuses to boot, hold the Shift key down (Safe Mode) while booting up again to disable Parallels and other at boot kernel externsion files, update Parallels and then reboot normally.
    While in Windows in the virtual machine, Windows Update to the latest version (Control Panel) and also make a "snapshot" this way you can revert to that for updates or if you get malware. Install the free Microsoft Security Essentials, it's good enough in most cases as you can "fall back" on the virtual machine snapshot if you get infected.

  • Upgrade 1985 Mac 512k to run Snow Leopard

    Is it possible to upgrade my 1985 Mac 512k to run Snow Leopard?
    If so, what do I need to do?
    Thank You!
    Photograph1951

    No.
    (83312)

  • HT203167 my song will not download to my iphone. I continue to tap retry but no matter how many times I try it will not download to my phone. I have purchased the song but cant download it. How do I get it to finish downloading?

    I have a song that will not download no matter how many times I retry it.  How do I get it to Download on my Iphone?  I have purchased the song but it is stuck in the download catagory.

    You preferences not saved,
    *http://kb.mozillazine.org/Preferences_not_saved
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    Profile Backup and Restore
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • What to do with Palm Desktop data when I upgrade to Mac OS 10.6 Snow Leopard

    I have an old Tungsten handheld device but only use Palm Desktop on my Mac.  I have a lot of data stored in this format and do not want to lose this functionality when I upgrade to Snow Leopard, which, I understand, does not support Palm Desktop.  Ideally, I'd like to export my Palm Desktop data (address book, memos, to do list, and calendar) to another software package that will run on Snow Leopard.  I do not need any syncing capability.  What are  my options?
    Thanks!

    I have an old Tungsten handheld device but only use Palm Desktop on my Mac.  I have a lot of data stored in this format and do not want to lose this functionality when I upgrade to Snow Leopard, which, I understand, does not support Palm Desktop.  Ideally, I'd like to export my Palm Desktop data (address book, memos, to do list, and calendar) to another software package that will run on Snow Leopard.  I do not need any syncing capability.  What are  my options?
    Thanks!

  • How do I upgrade my mac O.S. to Snow Leopard from O.S.  10.6.3 ?

    How do I upgrade my mac to snow leopard from O.S. 10.6.3 from 10.5.8?

    Choose About this Mac from the Apple menu and check the processor.
    If it's a PowerPC Mac, it's already running the newest OS it can.
    If it's an Intel Mac, click here and install the DVD.
    (86015)

  • Upgrading from 10.5.8 to Snow Leopard using retail install disk. Do I need to have my original serial numbers to install? I've lost them.

    I have a 2008 iMac currently with 10.5.8 OS. I finally have given in and need to upgrade to Snow Leopard. I ordered the retail disc and just received it, but I thought there would be a new install serial number with the disc. However, there is nothing. I lost my original install serial numbers ages ago, so I'm wondering can i even install this new OS?

    Go ahead. Unless you got a Mac OS X Server DVD, you won't be asked to provide a serial number at any point of the installation.
    (123221)

  • I have my AIR plugged into another monitor and after it goes to sleep sometimes it sounds like the system is running and it will not come back up..  I have to restart it.   What is this..  Please help

    I have a macbook air and i have it hooked to another monitor and I love it but lately it has after it goes to sleep for a while it sounds like it is trying to run the drive or fan really hard and when I try to bring it alive it does not come back to life so I have to hard boot it and then restart it.   What is this...

    Go into Sys. Pref , and power settings and UNcheck "put hard disks to sleep" on both power tab and battery tab.
    When on projector use with your Air and a presentation, dont close the monitor or sleep your Air.
    Verify any coincident applications running that can/could conflict with projector / sleep occurrence by running Etrecheck:
    report back on same
    http://www.etresoft.com/etrecheck
    EtreCheck is a simple little app to display the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to help people help you with your Mac. EtreCheck automatically removes any personally identifiable information from the output.

  • With ios 7 switch from photo to video camera does not work neither on iphone 4 nor on ipad 3rd generation retina what can be the problem ?

    With ios 7 installed 2 days ago on my iphone 4 and on my ipad 3rd generatiion it is not possible to switch the photo camera to video camera . What is the problem ? Did someone meet the same problem ?

    Did you try swipe up and down to change?

Maybe you are looking for

  • Is there a norwegian dictionary in pages? If not, will apple ever make one?

    Hi! Since I'm norwegian, I often write texts and articles in Norwegian on my Mac. I currently have pages, but it bothers me that it always corrects my texts to swedish or english. So my question is, is there a norwegian dictionary for pages that I ha

  • Save metadata to file + Edit in PS = Reset develop adjustments?

    Hello: I don't know if this issue has been raised  before, since it's not easy to describe it and, hence, to perform a  search based on it. I would like to know if this is a bug or there is  some reason for it which I haven't think of yet. Let me exp

  • Not able to download app on creative cloud

    Hi Can anoyone help? I've been having problems trying to download app on creative cloud. It kept prompting ''Download Error, press retry to try again or contact customer support'' How do i resolve this?

  • MacBook Pro Crashes, Resulting in Grey Screen

    I purchased a new MBPro in September. On 3 occasions while using it, the computer freezes, morphs into a grey screen telling me (in 5 or 6 languages) that there was a problem with the computer. It restarts in just a matter of seconds. This has happen

  • Class not found when using JvmModelInferrer

    I am trying to transform one of my language elements to a class using the ModelInferrer approach. This generated class should extend a class (AbstractMatcher) from an external project. The external project is added to the build path of the Xtext mode