Recent upgrade removed kde juk and k3b activity(solved)

Cannot use juk or k3b since recent -Syu upgrade applying new kdemultimedia and libs.
How do I recall the upgrade thru pacman to try -Syu again?
How do I fixit?

pierluigi;
The file you referred to has the previous kdelibs and kdemultimedia as well as the new versions.
I assume I could force the old versions into their slots but then don't know what would then occur because I have no clue as to dependencies.  Several packages were downloaded at the same time and I assume they could well be dependencies.
I receive a SIGSEGV (Signal 11) warning upon boot-up.
I have a double problem---I cloned my HDD so the clone has the problem also!!!
I have need to make a CD copy so I have to run to the window!!!!!

Similar Messages

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal

    I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal.  Except I don't know where these are coming from or why.   I've check iCal preferences and Help - can't find a way to stop this from happening automatically.  Any Clues?  Also, some of the events are already on my calendar and have been for quite some time.

    Greetings,
    What do you mean by "events to update"?  Do you mean invites to new events or changes to existing invites?
    Troubleshooting:
    1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
    2. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps!

  • HT5622 I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December.  I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

    I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December.  I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

    There could be many causes. What happens when you try to use it. also try adding it again.

  • I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it.  It says "preparing to update" eternally.  Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day.  arg.

    I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it.  It says "preparing to update" eternally.  Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day.  arg.
    I have tried direct connecting the iphone 4, via wifi, everything.  I hate itunes with a passion, but it seems to be a necessary evil.  I dont know why I would have no trouble with my iphone 3.  I am using the same technique for both phones.  Find the music I want in the library and drag it to the iphone.  Works on IOS 6, not IOS 7.
    WHat else should I try?

    Hi jeffmbellucci,
    If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
    Apple Support: Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    Regards,
    - Brenden

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

    Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

    I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
    If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

  • HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

    hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.

    I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.
    I've upgraded to iOS 8.0.2 with no improvement.
    I've reset network settings on both versions with no positive result.
    I can't rollback to iOS 7 as apple has stopped signing the build.
    I realise the 4s is fairly old tech but this experience has been quite time consuming and incredibly frustrating as I still haven't managed to resolve the issue. I had been holding back to upgrade to the new generation of iPhone but this experience and the negative press has made me seriously consider other options. 

    Here is what you can try,
    Hold both the power and home buttons until the device powers off, may take 10sec. Let go of both as soon as screen goes black.
    Open itunes on your computer and plug in your cable to the computer but NOT the phone.
    Once itunes is open hold down the home button on phone and plug in cable and continue holding home button until you see the connect to iTunes logo on screen. iTunes will give a msg that a device has been detected in recovery mode. Now select restore and do not disconnect until you see your device in iTunes again.

  • I have a late 2008 macbook running good now at 2012 when will i need to upgrade recently upgrade to 4g memory and 2ghrz

    i have a late 2008 macbook running good now at 2012 when will i need to upgrade recently upgrade to 4g memory and 2ghrz

    Nobody can tell you when you'll need to upgrade, as it depends on the software you're running, the operating system that software requires, and the state of your hardware. You've added memory, which you needed to do with Mountain Lion, and you could replace the hard drive with an SSD for better disk performance. 

  • CAN ANYONE HELP ME?! I have just recently upgraded to ios 5 and it works fin the first 3 weeks bu suddenly i cannot send a text to a certain contact all o the sudden. It always say message sent failed. PLEASE HELP ME!

    I have recently upgraded to ios 5 and it worked fijne in the first 3 weeks. But suddenly i could not send a text to a certain contact, when i sed a text it aways say message send failure.
    PLEASE HELP ME!!

    shegoure wrote:
    I have resetted my iphone numerouse times and like its a quick fix..
    What happens if i reset my iphone?
    Hi, Sorry, have edited my first post to you as I misread your question...
    A reset is like a reboot on a computer...  You will not lose any Data...
    Resetting your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    iPhone Reset
    http://support.apple.com/kb/ht1430

  • I recently upgraded to mountain lion and now cannot connect to my Brother QL-570 Label Maker

    I recently upgraded to Mountain Lion and now cannot print out on my Brother QL-570 printer. I get as far as typing in the label name and then the labeller or computer disconnect. I have tried downloading drivers from Brother but they can't do that as only Apple can do that but there is nothing in Apple to do that. I also reloaded the program off the set up disc. . Any ideas?

    yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver.  If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package.  and then you can install it.
    ** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
    well, enough for tonight
    if this didn't help you, then ask me again tomorrow
    John b

  • I recently upgraded my iCloud storage and trying to store my photos to it. Out of 500 only 150 is uploading. I know space is not a problem I have 13.5 gigs remaining on my cloud. Please help.

    I recently upgraded my iCloud storage and trying to store my photos to it. Out of 500 only 150 is uploading. I know space is not a problem I have 13.5 gigs remaining on my cloud. Please help.

    Welcome to the Apple Community.
    Assuming you have finished with your old backup.....
    You can see what your iCloud storage is used for and delete any unwanted content at settings > iCloud > backup & storage > manage......

  • I recently upgraded to Fios Quantum and have a new ActionTech router. As a result my PC is no longer communicating with my APPLE TV.It must have a firewall or ports beegin blocked preventing the homesharing and communication even though the APPLE TV is on

    I recently upgraded to Verizon Fios Quantum high speed internet and was given an ActionTec router. I sucessfully installed all and connected wth my Apple TV. Although it worked initially it no longer does.  Something appears to be blocking  the Homesharing between my PC and the AppleTV even though the Apple TV is successfully connected to my home network. I spoke with an Apple Support Tech who was unable to help me becuase I have a PC! He admitted this is a common problem with FIOS and PCS. There must be a port that needs to be opened in the router. I do not beleive it is anything to do with my antivirus software or Windows Defender as i uninstalled all and still not communication. Must be a port within the routter that is blocking tis communication. On my Itunes you can see that it does not see the Apple TV. Please advise.

    I'd have to agree. I set my vms and two clients on Saturday in one hour. I think the picture is better I did not see an issue with the brightness. For the heck of it I recorded five channels at once to test it. I've also noticed when playing a recorded show on the client everything responds a lot quicker. So I am impressed and curious to see what new features come later.
    Kudos to verizon.

  • I just recently upgraded to iOS 7 and found out that i can no longer hide my text messages on the home screen anymore. Can anyone help with this?

    I just recently upgraded my iphone 5 software to ios7 and discovered that i can't hide my text messages as i could previously in ios6.2., can anyone help me out with this?

    I had this problem last night as well.  Only my daughter upgraded to iOS7 and she had an old phone of mine.  When she upgraded, the phone asked for my apple ID and then continued as normal.  However, after the upgrade, any text message that I recieved, she also recieved.  I am pretty sure my wife thought I was hammered when she started texting me and my daughter began answering her not having any clue what she was texting about.  Anyway, this only occurred with texts from other family members, not from texts I received from friends who are obviously not on our account (we have Verizon BTW).  To resolve this issue, and it isn't a short resolution.... there are two options...   One, simply erase everyting on the phone.... I don't like iTunes 11, so we were unable to back up her phone.  I made her go through her 600 photos, delete the ones she didn't want and email the ones she wanted to herself, and then we wiped the phone clean and rebooted it... go into Settings, General, Reset, Erase All Content and Settings.  The second option, if you have iTunes 11 is to back up the phones one at a time,  and then go into Settings, General, Reset, Erase All Content and Settings.  Either of these options wipes the phone clean of all information, text contacts pictures etc and then you have to re-enter all of your individual information.  When you do that, make sure that no one is on the same iTunes account.  Theoretically, after you do this, you plug back into your computer and SYNC your phone from the last back-up.  This resolved the problem for us.  I don't know if there is an easier solution, be we tried logging in and out of our iTunes Accounts, turning the power on and off, and nothing changed.  So, we had to go the more difficult route to avoid mass confusion with family texting.

Maybe you are looking for

  • [SOLVED] How do I use .tex files as templates in vim?

    I finally got vim just the way I like it, and I plan to write papers using LaTeX now that I have seen the light. I created a .tex file called documentTemplate.tex with all the options set up for the title, author, font, margins, etc. just the way I l

  • Transaction S_PL0_86000030

    hi everyone, i am using tcode S_PL0_86000030 and sometimes i am encountering an error dump. this is a standard transaction and would just like to know your ideas why this is sometimes throws a dumped error. The error was because of fetch statement in

  • HtmlText in input text field?

    Hi Is it possible to have input text fields respond to htmlText? I'm sure I've done it before. Although the following code displays the string correctly, there is no color formatting displayed: e.target.htmlText = noColour + "<font color='0x00FF00'>"

  • Error during System Copy in SCM system

    *Hi We are performing System Copy of SCM system. Java was not running in the system from the starting. we are facing following error while performing system copy*  Please Help.. Oct 23, 2009 12:05:38... Info   : Successfully parsed! Oct 23, 2009 12:0

  • QTI Tranformation with XSLT

    I have a lot of trouble getting Dreamweaver 8 to transform an QTI formatted XML. Basically, it just produces an empty page. Here is the XSLT sample, it couldn't be simpler, the only XSL line is bolded. <?xml version="1.0" encoding="iso-8859-1"?><!--