Recent upgrade to Facebook has caused me to be unable to add 'comments'. I run Ibook with 10.3.9 so it appears FF 2.0 is best I can up grade to. FB says to upgrade browser... Which I can not do without buying Tiger 10.4. Any suggestions?
I know others are asking FBook for assistance. Which we all know is likely futile. So I thought I would ask here at Firefox. On my PC laptop I run FF4.0 but on my wife's Ibook we run FF2.0. The combination of Ibook 10.3.9 and FF2.0 seems to be a death blow. I am not likely to spend $100 to upgrade to Ibook 10.4 so I can then upgrade FFox. Doing so is expensive and I really wonder how long before Fbook upgrades again... Kind of a chicken chasing an egg. Right now I have a very unhappy wife who cannot understand why I can't fix it! Help!
Firefox 3.6 works with OSX 10.4.
The last version of Firefox that ran on 10.3 (according to system requirements) was Firefox 2. Because it has not been updated for years, Firefox 2 is not secure and definitely not recommended for use on the wild wild web.
I think you might be out of luck!
Similar Messages
-
I have both an iPad & iPhone 4 and have continuos apple password problems. Is there a way in which I can find which device is linked to my applee account?
You can only Deauthorize computers you have in your possession.
If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five, (Please Note: this can only be done Once every 12 months) and then re-authorize your current Computer(s) one at a time.
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420
Asmith12 wrote:
... . Is there a way in which I can find which device is linked to my applee account?
For Devices...
See Here...
iTunes Store: Associating a device or computer to your Apple ID -
I am getting lots of messages that say that my browser/operating system is not supported. I am a Version 10.6.8. Do I have to upgrade? Does this cost money?
1. No. You can switch to another browser, such as Firefox, instead.
2. If your computer supports Yosemite, no. If it doesn’t but supports Lion, yes. If it doesn’t support either of them, it isn’t possible to upgrade.
(120272) -
Hi, I recently upgraded to OX X Mountain Lion, and now I cannot upload any of my pictures from iphoto or even my desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?
Not having a media card in your BlackBerry may affect your ability to transfer media files onto it. There is a file size limit of 2.86MB when transferring files into device memory. http://bbry.lv/9XNuy0
Have you verified that the applications you are trying to install are supported by your current wireless provider? Unlocked devices from one provider may not have full functionality on another network.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
i tried to fix screen rotation on my ipad 2 after upgrading to ios 7. did the lock / unlock button, the on/off and even reset to factory settings... nothing works... do not know what to do... any suggestions?
When you reset to factory settings, did you restore as new or did you restore from a backup? If you restored from a backup, you could try restoring as new and don't use the backup. If you do that, you will lose all of your data, but you can download or sync all of your content back to the iPad.
You could also try resetting all settings before your restore as new. Settings>General>Reset>Reset all settings. You will have to re enter all device settings again.
And of course the possibility does exist that the iPad has developed a hardware problem that is causing the rotation issue and only a visit to an Apple Store could determine that for sure. -
I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue. -
I've upgraded my iPad to iOS7 and am now unable to access books purchased on iBooks prior to April 2012, why is this?
I've upgraded my iPad to iOS7 and am now unable to access books purchased on iBooks prior to April 2012, why is this?
-
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
McHagihara wrote:
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
You can try to locate your problem without the erase and install method by running through this list of fixes.
Step by Step to fix your Mac
But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
Most commonly used backup methods
Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
How to erase and install Snow Leopard 10.6
If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
Yuo might need to install more RAM into the machine to make 10.6 run better as well. -
iPad keeps saying iOS 5.1.1 is "up to date" -- yet trying to download iOS6 -- any suggestions? Have tried "settings" on the iPad, which continues to say 5.1.1 is up-to-date, and have sync'd with iTunes, which also says the iOS 5.1.1 is up-to-date.
No, the ipad first gen. will be getting no more updates. Its no longer available in the apple store.
Unfortunately, if you wish to use apps or features that require iOS 6, you'll need at least the ipad 2 -
One of my kids has an iphone 4, the other has an ipod. Bluetooth is ON for both, but they are not discovering each other. Are there any suggestions? (They bought a simple texting app so the ipod could text the iphone.) Thank you.
The built in BT profiles that iOS has do not include any kind of file sharing. Does the app say that it will text over BT? If so, then the connection would most likely be handled through the app itself. What is the name of this app?
-
I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles, asking me to sign in and then I get the same message again. This is getting frustrating and I really don't seem to be able to get help. I can't contact customer support because I have a PC and there is a serial number of an apple device required.Can anyone help please?
You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.
-
I'm trying to delete some recently downloaded apps that don't work. They are faded grey and although they shake with the other apps, no cross appears in the top corner. Any ideas anyone? Thanks, Sean
I have the same issue witha slight variation. The app icons that are grayed out and cannot be deleted are DUPLICATES of other apps that I already have. For instance I now have 2 Redbox apps - one works normally, the other cannot be opened or deleted.
-
I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
Thank you.I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766
-
I cannot purchase a movie bundle on my iPad it says purchase can not be completed contact support iTunes. Any suggestions as to why this is happening?
302jennbm wrote:
.. it says purchase can not be completed contact support iTunes. ..
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
I need only to select node with "NodeName" (or/and Number) in a Java Tree
I need only to select node with "NodeName" (or/and Number) in a Java Tree. Can anybody help me? Thanks a lot
-
Hi all, I usually have the files window open with local files at left and remote files at right. I would like to see most of the infos of my local files (name, size, modification date, etc.) but just the file names of the remote files. I drag the mid
-
DBMS_SQLTUNE.REPORT
Hi, on 11g R2 on Win I run in SQLPLUS: variable stmt_task VARCHAR2(64); EXEC :stmt_task := DBMS_SQLTUNE.CREATE_TUNING_TASK(sql_id => '4rc7d8c0mvfm8'); EXEC DBMS_SQLTUNE.EXECUTE_TUNING_TASK(:stmt_task); SET LINESIZE 140 SELECT DBMS_SQLTUNE.REPORT_TUNI
-
Hello friends, is Z-Link functionality available? Which table/view contains the results of z-link? I try this in my application to find out how many clicks a document have : http://www.leanverein.de/pls/htmldb/z?p_url=/i/adunord/dokumente/gl2008-1.pd
-
Hi all, Currently I am developing a simple web application which contains a form for user to fill in personal information for registration. Once the user fill the form and press submit button, a validation in server side will be processed. If it fail