Recent victim of slow evening speed....

Hi all
Over the last few years BT have tentatively held onto my business. Speed has gradually increased and it once reached the heady heights of 7.5mb. Then over the last 6 months or so it has slowed down to about 5-6 generally with a line profile of 6.5 still ok for my needs. The last 6-8 weeks though have seen evening dropping to 0.8-1.6 mb increasing a little at midnight and then a lttile more at 1am. Which stinks of intentional throttling due to a possibly exchange congestion which would be believable if there were more than 20 houses close by!
Now my suspicions are that this started after the great BT sport push and I'm thinking that BT are prioritising BT vision/sport customers. The local rugby team have quite a following and I have noticed a decent amount of people in the greater local area (I'm an IT engineer so I see a lot of different peoples tech) now use BT/vision sport to watch the rugby games that were previously unavailable.
Any thoughts. I've just spent an hour and a half that I'll never get back talking to tech support with my router plugged into the master line box testing socket via a microfilter and my laptop connectied to that with an ethernet cable with a 0.91mb speed and was told that this was just the way it was effectively.
I have 4 months left of 10 years with BT is there a reason to stay or would changing get me better evening speed?
thanks all
p.s. no fibre here

Thanks for your replies
Current broadband stats and speedtest (actually better than earlier) results are below.
Download speedachieved during the test was - 1.67 Mbps
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :7.49 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 6.5 Mbps
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 0 days, 01:14:29
Downstream: 7.313 Mbps
Upstream: 448 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 6.0 dB / 18.0 dB
Line attenuation (Down/Up): 37.0 dB / 20.0 dB
Output power (Down/Up): 19.9 dBm / 12.3 dBm
FEC Events (Down/Up): 5308 / 0
CRC Events (Down/Up): 3 / 0
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 90 / 0
Error Seconds (Local/Remote): 2 / 0
As I said fine during the day but pretty rubbish in the evening. Certainly at a level where there is no point continuing Netflix/LoveFilm subscriptions. I might ask their opinion on the situation though.
Having been a field engineer a QLT is a good first port of call but the line sounds pretty clean to my ears.

Similar Messages

I have recently updated to ios6. But safari browser is very slow ,even twitter, Facebook also facing the same problem also cannot accsess to some websites too.

I have recently updated to ios6. But safari browser is very slow ,even twitter, Facebook also facing the same problem also cannot accsess to some websites too.

Try these basic troubleshooting steps.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or .... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
For Safari ..... Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and now seem to have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

Try my Mac Performance Guide.
If that doesn't help, post back here with the results of all the things you tried to do as part of that guide.

From the old forum.... Slow broadband speeds in th...

FROM THE OLD FORUM Original post by John Jorgensen...
Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 9:17 AM
Click to report abuse...        Click to reply to this thread    Reply
Hi,
I have had bt broadband opt3 for almost 3 months now and have always had a healthy 9mb+ connection, however have noticed it being very slow in the evening when I come home from work, I checked the speed last nite as iplayer was constantly freezing and was getting 1mb . A bit upset by this as I got bt broadband to play my ps3 online and to get faster speeds on my laptop, and I use these services mostly at nite.
I checked my speed this morning and was getting 11mb, is this normal or am I being capped I cant believe Id be going over my download limit. Can someone from bt get back to me on this?
Thanks
John
alison griffiths
Posts: 54
Registered: 11/3/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 11:22 AM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
Welcome to the world of BT , the tv advert when he says " business slow" when trying to load a webpage is not other companies thats BT.
John Jorgensen
Posts: 2
Registered: 9/2/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 12:11 PM   in response to: alison griffiths in response to: alison griffiths
Click to report abuse...        Click to reply to this thread    Reply
Yes Alison, I think I can see that now. I wouldnt mind if broadband was a bit slower at peak times, I know thats normal, but when I'm only getting 1mb when my max is 14mb, I just dont feel I'm getting what I pay for. And when it gets to the point where I cant watch iplayer without it stuttering everywhere and online games lagging on the ps3, this is certainly not what I'm paying for.
I was hoping one of the mods here would help me and check my line and see if there is any cap on the line and get it removed.
I really dont wanna phone India, I deal with them 5 days a week as is...
Think I will just send one of the mods an email to check my line and see if it is being capped or if somethings wrong.
anthony dickerson
Posts: 72
Registered: 4/26/07
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 3:52 PM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
You will never get decent speeds on Iplayer,
BT limit it because they want you to subscribe to their precious BT Vision service.
The only way you are guaranteed to get decent speeds on BT is to subscibe to BT Vision and also unlimited broadband.
Then you will get priority when you stream TV at your exchange unlike fighting it out with all the other broadband users as you currently are for the available bandwith.the more over subscribed your local exchange the worse it is
Paddy B Mod
Posts: 199
Registered: 10/13/08
   Slow broadband speeds in the evening all of a sudden
Posted: Jan 23, 2010 2:04 PM   in response to: anthony dickerson in response to: anthony dickerson
Click to report abuse...        Click to reply to this thread    Reply
Hi John,
I can take a look at the network side of things for you, to see if there is anything I can do to help improve your speed during peak periods. Please could you drop me an email with your BT account details? Please also include a link to this thread. It would also be very helpful if you could run a few speed tests using www.speedtester.bt.com when you feel your Broadband is running slow. I can then check those results from here.
Thanks
Paddy
BT Forum Moderator - [email protected] - if you're emailing please include a link to your thread so I can reference back to it.
Mateusz Sokolin...
Posts: 2
Registered: 10/11/08
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 7:33 PM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
Well John i'll tell you what it is...
First of all welcome to BT and I hope you'll enjoy 18months of pain and suffer.
OK here it goes....
If you look at your contract, find a rule that says Fair Usage Policy.
Basically it states that BT will cap anyone that is abusing their lines.
However, it does not say what are the limits after which you are going to be capped for how long and at what times. (I'll come back to this later and explain)
If you ring 08007076044 I'm sure that someone will confirm my theory. As constant 1MBit between 6PM till 11/12 PM is actually FUP applied on to your account.
Ok time to explain my frustration about FUP.
Since I signed my contract with "lovely" BT for constant 4 months I had similar issue but it took me even longer to find out what is going on and how to deal with this problem (thanks to google).
FUP team states that if you exceed 100GB in a month (everyone will admit that these days 100GB is nothing when a single game for PS3/XBox360/PC sometimes is more than 5GB and 1080p film is about 12GB) will cap you for a month at peak times to outstanding and superfast 1Mbit (about 130-150KB/s).
I'be been watching my download and for few months never exceeded that 100GB in a month. Been ringing FUP team to verify when suddenly they told me that from (cant remember exactly) March FUP will apply only to accounts that are using Torrents and other P2P.
you won't believe how happy I was hearing that.... So i've started to download and next month guess what.... 1Mbit connection.
Really mad rang FUP team and asked them what on earth is going on. They confirmed that its only P2P and I've explained them that I only use Youtube, BBC iPlayer, Rapidshare, Steam and XBox Live, Beatport (just don't understand how ppl can use torrents and other P2P as they are just way to slow). So they were happy to take the cap off my broadband connection.
Next month same issue solved exactly the same way.
After that for consecutive few months I had no problem whatsoever until September where FUP Team said that there is no such thing and FUP applies to everyone.
So just want to say that BT is rubbish that can't keep their word.
I went to one of the sales advisor in the shopping centre and asked him how FUP works as it does not say in the contract "how, when, who and what".
So he said that policy is applied based on amount of files downloaded within that 100GB. So if I download e.g. 3x 50GB (although its 150GB altogether) files I wont be affected but 100x 1GB will put a cap on me.
I've been so curious if what he said was right and started to download 2x 60GB and guess what... Got frigging FUP placed on my account!!!.
I've got 2months left with them and will be extremely happy to cancel my contract, moreover, I will do everything in my power to sue them under EU Consumer Rights Law (that states that contract should be clear and fair to both sides) as Fair Usage Policy is one of those things that allows BT to do anything they want to their customers;
1. No clear explanation of what FUP is.
2. Does not states the amount of downloaded data required to have cap on the acount
3. Does not states for how long it will be applied
4. Does not states when it will be applied
If you look at e.g. Virgin Broadband everything is clearly written in nice and understandable way. It warns you at what times FUP will be applied under what circumstances and for how long. Isn't it what we all want to know??
Alex Owen
Posts: 3
Registered: 12/13/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 9:35 PM   in response to: Mateusz Sokolin... in response to: Mateusz Sokolin...
Click to report abuse...        Click to reply to this thread    Reply
@Mateusz I think I maybe a victim of this outragous stint BT have done. I have 2 XBOX 360's running on XBOX Live, 2 Desktop PCs connected to the web constantly, and 3 laptops, we have a torrent sharing running and World Of Warcraft on one of the PCs. All of this is shared across a 6 person family. How can a family where two members goto to college and university do their college ork, download application such as VB.net do their coursework and revise without the hassle of a **** connection. Seriously BT get your ******* head outta your **** and stop this ********, we are customers, we pay for what we are offered. When I signed up several years ago I could download everything on the net woithout infracions on my line being set in motion. You altered my contract without telling me. You will lose custom from this. Also you have ****** my wireless
Edited by: Alex Owen on Jan 24, 2010 9:36 PM
amanda jones
Posts: 33
Registered: 1/8/10
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:42 PM   in response to: Alex Owen in response to: Alex Owen
Click to report abuse...        Click to reply to this thread    Reply
You lot are lucky, We wish we could be capped to 1mbit. Our IP profile is capped to 500kbit because BT say the line isn't good enough for anything more. We are paying for option3 up to 8mbit and BT have said we must continue to pay for it for the remainder of the contract, or buy ourselves out of it early, the reason they give.... Up to 8mbit means up to 8mbit. If you dont get 8mbit then TOUGH LUCK SUCKERS!!
The outcome? We feel like we've been turned over by a dodgey second hand car salesman called BT. The internet deal he flogged us was a dog, a ringer, it wasn't cosher and certainly had a false MOT certificate.
Computer Geek
Posts: 429
Registered: 7/22/05
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:49 PM   in response to: amanda jones in response to: amanda jones
Click to report abuse...        Click to reply to this thread    Reply
Hi Amanda,
Why have you joined BT Option 3 when you can not get what BT can offer?
No pun intended but you are a bit of a sucker for paying high prices where other suppliers are cheaper and can provide what your line can support.
CG
amanda jones
Posts: 33
Registered: 1/8/10
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 26, 2010 9:13 PM   in response to: Computer Geek in response to: Computer Geek
Click to report abuse...        Click to reply to this thread    Reply
we moved house last october to this one, the connection was rubbish from the get-go, BT said the router was broken and we needed a new one, we said OK. That "OK" meant that we had entered into a new contract for option 3 same as out old one. The router wasn't broken, the new one didnt fix or improve the problem, we have since asked for a price reduction or compensation and been told "no". we are in contract and can pay to buy ourselves out of it if we like but otherwise we have to pay for option 3 and recieve fixed rate 500kb.
Clare Thurston
Posts: 4
Registered: 10/17/06
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 27, 2010 11:57 AM   in response to: amanda jones in response to: amanda jones
Click to report abuse...        Click to reply to this thread    Reply
Hi Amanda,
I think you'll find that the Hold To Term rules have changed. BT are now unable to charge you for the account if you no longer require it. It is against OFCOM's rulings for a company to make more money out of you as a leaving customer than an existing one. However, You will need to pay for the connection charge (if that has not expired it's original differed contract) which is £40. A cancellation fee of £25 if you are simply cancelling and not migrating using a MAC key and for any hardware. The Routers are advertised at £88 and i would suggest that if they believed on to be faulty then that would be replaced under guarantee and not be put on a differed basis. I would check exactly what they say the are charging you and query this through OFCOM. http://www.ofcom.org.uk/

Months of impecable service form BT as an option 3 customer. (I've even recommended BT to people)
but
For the past 2 weeks peak traffic has murdered my connection.
I can get 14mbit off peak, and it used to drop to about 7-9 at peak times.
Now its down to 1-2mbit at peak times. (no i haven't breached FUP as I check my btinternet inbox for the 80GB warning)
I think its resonable to experience drop off but 90%!!!
BT advertising says fast speeds at peak times. less than 2mbit is not fast. (that the governments minimum standard!!!)
I don't know how to procede because when I'm experiencing these issues if I ring up I will end up waiting so long to speak to someone (because its peak time) the concection wiill be better again.
I can think of no recourse other than to approach trading standards...
Guarnetee me 5mbit at peak times (enough to stream HD iplayer) and I'd be happy
That is what BT vision customers are in essence are getting + what ever their PC is using.
Fair usage? what about Fair Supply.

Very slow download speed with Airport Express

Hi.
I've recently experienced painfully slow downlink (download) speed using Airport Express.
My WiFi configuration:
- main router: WRT54G connected to my provider (speed limit: 4Mbit up/down link),
- AirPort Express with WiFi N and Airtunes hooked up to stereo in living room,
- AirPort Express WiFi G and Airtunes connected to stereo on bedroom.
Second Airport is currently not used to simplify tests and description of my problem.
The problem: when connecting from MacBook to Airport Express I can't reach more than approx. 512kbit downloading from internet, usually even 300kbit, while uplink reaches easily 2.5Mbit (limited probably by my network provider). While connected to WRT54G I can get 2.5 up to 4Mbit downlink, same when using cable directly plugged in to WRT54G.
I tried changing channels, switching different options in Airport with no effect - still getting pathetic download speeds. Even worse - browsing experience is awful, with frequent slowdowns, etc.
I tried different encryption methods, and seems like only switching it off at all (unprotected network) seems to let my Airport work on full speed (2.5Mbits symmetrically up/down, up to 4Mbits - provider speed limit) - which is unacceptable, I refuse to set up and use unprotected network at home.
Problem is clearly in Airport or in interaction between Airport and Macbook. I've just ran out of ideas - can you help me?

I can't offer any help with your problem except for the fact that mine has recently done the exact same thing. It's ridiculous, for months and months it was extremely fast and then all of a sudden it takes 20 minutes to open a simple browser page. Something is definitely wrong with the airport because all other wireless internet connections from other routers are as usual. \

Another Slow Broadband Speed Post

Hi there, having read through a few of the posts on here regarding slow BB speeds, I hope I'm able to provide all the necessary info for some assistance in narrowing down the problem.
Having recently moved back into my parents house (temporarily) I instantly noticed the drop in speed from my previous house, depsite knowing that previously they had a faster connection. This slowness has been persistant over the last 3 weeks until I've finally arrived here.
Speedtest.net results:
Ping 33ms
Download Speed - 0.25mps
Upload Speed - 0.99mps
After this, I changed micro filters, plugged direct into the phone line, even changed the router to my own but still got persistantly similar results.
I've tried the BTSpeedtest which failed to get a result due potentially to slow line speed? or an error in the speedtest.
The BT Wholesale speedtest came back with:
Download Speed - 0.24mps
Upload Speed - 0.75
Ping - 41.25
The Homehub Line Stats:
Line state
Connected
Connection time
1 day, 21:00:35
Downstream
283 Kbps
Upstream
1,152 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.3
Latency type
Interleaved
Noise margin (Down/Up)
5.9 dB / 6.0 dB
Line attenuation (Down/Up)
41.0 dB / 22.6 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2940224 / 4294967265
CRC Errors (Down/Up)
154 / N/A
HEC Errors (Down/Up)
N/A / 1
Error Seconds (Local)
55
I've also done the Quietline test, had quite a loud hum on the line but no distinctive crackling/noise.
I hope this is enough information to go off but let me know if I need to do anything else to help diagnose this issue before speaking with India!!
many thanks,
Terry

Connection time is <2days was that a manual reset? Have you had problems with the router dropping connection?
are you connected to test socket? Was quiet line test with cordless phone? If so should be dull hum. Have you tried a new filter?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Its been almost 2 Weeks...SLOW DL SPEED

My download speed has been really slow recently. my package is 20/5 and now im getting 0.4/2.6.
Whenever I called customer services, they asked me to do the same things. (reboot your modem, turn off your computer, go to speedguide.net, and optimize your setting and so on and on...)
Some of them admitted that they have a problem and others did not. I think that they have been received some complaints and they know about it but they couldnt pinpoint what exactly caused this.
I called them 4 times already, and they keep saying that i should wait and see.
Yesterday I researched some other FIOS forum, and I found In northeast area some people had been experienced the same sluggish download speed as I have.
These people said after verizon's ONT firmware update, they all having slow download speed. and they called technical support and tech guy sent some command and reboot thier ONT. and it was fixed.
So I called yesterday and explained the situation and asked for "hot fix". but she could nt understand the situation and kept saying wait and see.
she even said "hot fix is for Microsoft products."
humm... What shoud I do??
[northeast] Slow Downloads in Chester Springs, PA
They mentioned that they had to implement a "hot fix". That almost sounds like a software patch, is that what that means or something else. If we gave you the group ticket number, could you look it up and see what they did?
Message Edited by peterjun on 10-16-2008 06:15 PM

update still No Luck...
I called FIOS services center and asked for hard reset on my ONT and they did...no improvement.
they keep saying no problem in thier network...hummm...
I tried 100 full duplex setting change as one guy suggested...no change...
During some research thru internet, One thing I found is that there are quite a number of people who have the same problem as I have.
here is a link for messages.
http://www.dslreports.com/forum/r21284482-This-is-nutsFIOS-Internet-is-sloooooooow
http://www.dslreports.com/forum/r21283300-southeast-Whats-involved-in-switching-back
http://www.dslreports.com/forum/r21208319-northeast-BIG-Drop-in-dl-speed I
'm having the same problem. I think mine started early last week also.
I'm getting extremely horrible download speed, from only about 100kbps to 700kbps, on sites like microsoft.com, adobe.com, nvidia.com, giganews.com, ftp.netscape.com, etc. But my upload speed doesn't seem to be affected at all as is shown on speedtest.net. The download speed is so bad that even regular web browsing is somewhat affected.
FIOS tech support said it could be a hardware problem somewhere in the Verizon network and they'll try to pin point it and call me back in 48 hours. I'll call them tomorrow night if I don't hear from them.
The reason for him to say that is because while most places I'm getting horrible download speed, speedtest.net does show that I'm getting full 20Mbps down and 20Mbps up on a few of the testing servers. And while I was going to Trendnet.com to download drivers for my wireless usb adapter, I found that on »downloads.trendnet.com/ I can download at full 2.2+Mbps like I use to be able to.
Hey njchoochoo, try downloading this file and see if you're getting full download speed like you had before.
»downloads.trendnet.com/TV-IP422/···22_W.tgz
If you do, then we're basically having the same problem and I believe there should be more people out there with this.

E1200 router: very slow download speeds, ok uploady got

I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.
When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
What could the problem be?

So we could have this isolated, check how much speed you’re getting straight to the modem so we’ll have some point of comparison that from your internet provider. If through the router, you have struggles with not getting an acceptable value for download speed especially if it only happens with the wireless connection, you can try these: change the wireless channel and the wireless security on the router. If on the router, you have the channel set to auto by default change it to (3,6,9,11), just have to play around with it. Moreover, for the wireless security, select WPA2 Personal. If that doesn’t make any difference, update the firmware of the router, reset and have it reconfigured.

Slow Connection speed at all times, with regular d...

I would really appreciate any advice you have to offer! (P.s Connection time is so low because I recently connected the router to the test socket to see if there was a problem with my internal wiring)
I've been experiencing a slow connection speed (even though the router is connected to the master socket) much slower than with my previous provider and a very intermittent service. The broadband connection seems to drop out every time the landline is in use and when using the landline you can hear a lot of static/crackling in the background.
Connection Information
Line state:
Connected
Connection time:
0 days, 01:32:51
Downstream:
1.12 Mbps
Upstream:
444.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
5.4 dB / 8.6 dB
Line attenuation (Down/Up):
29.6 dB / 14.8 dB
Output power (Down/Up):
19.4 dBm / 9.9 dBm
FEC Events (Down/Up):
1412 / 0
CRC Events (Down/Up):
0 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 131
Error Seconds (Local/Remote):
12 / 15
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
937 Kbps
0 Kbps
1000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 937 Kbps
For your connection, the acceptable range of speeds is 400-1000 Kbps.
Additional Information:
Your DSL Connection Rate :1146 Kbps(DOWN-STREAM), 444 Kbps(UP-STREAM)
IP Profile for your line is - 1010 Kbps
I would really appreciate any help and advice! (P.s the connection time is so low because I tried to connect the router to the test socket to check if the fault was with the wiring. The router is normally on 24/7 and these problems still occur)
Solved!
Go to Solution.

Hi and welcome to the forum.
Have you tried another known working telephone into that test socket without an ADSL fiter.
If you have done all that you will need to report to your comms provider, if its BT Retail you will need to call them on 0800 800 151 or 0330 123 4151 from a mobile phone.
They will mention about charges but as long as you have done as suggested and you have not damaged any of the incoming wiring there "should" be no charge. when you phone do NOT mention broadband once any noise on your line is solved then your broadband will improve
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

WRT310N Playstation 3 Slow Download speed and general lag

Hey guys, I just recently bought the WRT310N and got both of my computers working with it. One is wired directly into the router, while the other is running off wireless. My Playstation 3 is able to connect to the router but I am getting an extremely slow connection speed.
Right now, both PC's get about 6.4-6.5 Mbps download speed while my Playstation is anywhere from 600 Kbs to 1.2 Mbps. I have plugged in my Playstation 3 directly into the modem and got a speed of 3.2 Mbps and was downloaded a demo very fast, but I do not recieve anywhere near those results when using it wireless.
Any advice? I have tried opening the ports, but that only seemed to slow it down. A couple of days ago I opened the ports specific to the game NHL 10 and for two days I was getting such a good speed in the game that it felt like I was playing offline, which was great! Then this morning, it just seemed do a complete 180. Now when I play the game I get an extreme amount of lag, and my other games like CoD4 get random lag spikes. Like, I'll be running and I get a lag spike which seems to happen fairly consistently every minute or so.
Any advice? Should I try opening the ports again or what?
Message Edited by Nimer on 10-02-2009 03:58 PM

I think you need to adjust the wireless settings of your Router, The wireless settings on your Router must have been setup to its default that's the reason you are receiving low signal strength on your PS3.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

External firewire hard drive reverts to slower transfer speeds

This is the strangest hardware problem I've come across. I'm running a unibody mbp (June 2009) with an external WD 2.0TB Caviar Green drive mounted in a firewire 800 enclosure made by icydock.
Lately, I've noticed that after an unknown amount of uptime, the speed of file transfers to the WD external drive slows down dramatically. I figured this out by watching my time machine transfers take a bit longer after awhile, and I verified this using aja system test and speedutilities.
When I boot my mbp in the morning, file transfers and time machine backups to the external WD transfer at a rate of about 67-75MB/s. This is the speed the drive should always be working at since it's connected via firewire 800. Aja speedtest verifies the speed is as it should be as well.
Then, after a couple hours of using my mbp, or even later in the day, I'll transfer a file to the external WD or run a time machine backup and find that the transfer will only run at a max of 29-35MB/s. This is exactly half the speed the transfer should be going at. Subsequent transfers stay at this slower rate no matter what I do.
However, I've been able to fix this problem by unmounting and remounting the external WD or restarting my mbp. After doing either of these actions, the WD external goes back to contant transfers at 75-80Mbs. So something is happening where the longer the mbp is running, or after some sort of disk activity, the external WD reverts to a slower transfer speed (closer to FW400). I can't isolate whether it's an issue on the mac os side or the hard drive or the hard drive enclosure because I can make the hard drive go back to optimal speed again merely by unmounting and remounting it. This works consistently until a few hours later when the drive begins to handle transfers at half speed again.
I run hourly time machine backups to the drive. The time machine backups can't be the culprit because the drive remains running at optimal speed after the backups (verified with aja system test and speed utilities)
Any possible ideas as to why the drive cuts down to half its optimal transfer rate after a bit of time? I can't figure out the cause of this, and the consistency of the drop leads me to think this is an issue with the power management on the drive since it reverts to full fw800 speed when I umount and remount the drive or restart my computer. Could this be an OSX issue where for some reason the system isn't negotiating the fastest speed?
Any help appreciated.

From the SoftRAID manual:
Fire hubs and disk drives. FireWire hubs are notorious for introducing errors and instability onto the bus.
Make sure that all of your consumer electronic devices (iSight, cameras, scanners) are connected to a separate FW bus. These devices are not built to the same standards as storage devices and known for introducing errors onto a FW bus.
Cables. While most cables work fine with a single device, many cables will introduce errors when 2 or more disks are connected to the bus.
http://www.softraid.com
http://www.softraid.com/demo.html - manual and demo
Output can be to any drive or partition. When you lauch iMovie it asks where to store your project.
I just bought a camera, and curious myself to see if I can take 10 minute clips and use iMovie/iDVD so that it will auto-play. I may end up buying Pogue's "iMovie Missing Manual" or something.
iMovie Discussions

HT1379 My macbook pro 2013 is running to slow even when I am using the keyboard, it running with a delay. I upgraded the memories to 8gb but still slow what can i do to fix it.

Good morning I am confronting serious problems with my Macbook pro 2013, that is runing to slow, even when I am writing this email is running with some kind of delay. I upgraded the memories to 8gb but still running slow . Please let me know what I can do to solve the problem. Thanks in advance. Fernando

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook pro: Extremely slow upload speed

Hi,
I know this question has beed raised many times before me, seemingly from hundreds or thousands of users, but none of the threads I have found has lead to any solution.
My new Macbook Pro (15 inch), using Lion 10.7.3, is simply unable to obtain anything but an extremely slow upload speed, when using Wifi. I am using an Apple Airpor Extreme wifi device. My work PC, my older Macbook Pro (13 inch), all tablets and telephones etc hooks up to the same Wifi device and obtain all the speed they should, but my new Macbook Pro is sloooooooooooowwwww and sometimes cannot even initiated an uload speedtest at i.a. www.speedtest.net.
As mentioned, I am aware that there are plenty of threads on this, but I am not aware of any that provides a solution.
Is there a solution or is my new Macbook nothing but crAplle?
Best regards,
n

My subscription is 10 Mbps downloadand 2 Mbps download. upload
I get that (10/2 Mbps) on all other devices, other than my new Macbook Pro.
On my new Macbook pro I get 10 Mbps download, but only from 0 to 25 Kbps upload.

Extreme slow upload speed in Dallas area

Hello
Something happened to my upload speed last Thursday, it has dropped considerably connecting to most servers making many sites very sluggish. I have the hardest time just attaching a file in Gmail and the gmail chat keeps saying 'unable to connect'. Using FTP for my work is almost impossible. It's takes me 5-10 tries to upload a file that's not even 50KB.
I've called Verizon tech support and went through different diagnostics and then they sent a new router, which still didn't help. Here's what I concluded so far:
It's not the router
It's not the computer since it happens on every machine
It's not the wiring since I can get good speed test connecting to some servers.
It's not the servers that i'm connecting to; everything works when i'm at work or on the phone.
I have 15/5, I've attached some speed test results.
Verizon's own speed test page even timed our during upload, which was stuck under 0.5 when it was about to finish.
Anyone else experiencing this? Verizon say my issue is currently with the engineers, but I have no idea how long that wait to be.
Thank you

Is there any Verizon representative that can escalate my issue?
Basically a tech came last Saturday and wasn't able to figure out what was wrong and left and closed my ticket. Whenever I call back now they're just telling me it's my computer, which is completely FALSE. All my 5-6 computer just doesn't happen to have slow upload speed of the sudden and require modification to RWin buffer as the suggested by the on-site tech. Verizon phone support bluntly told me they can't do anything further and would charge me for coming out again to replicate my issue.
Things the tech have already tried:
-Run Fios Optimizer multiple times on multiple computers.
-Replaced router
-Replaced ONT
-Rebooted PON card
Upload speed still sporadic, works perfect on some speedtests, but it's less than 0.5MB on many servers including Verizon's very own local speedtest. Gmail and any google site request is constantly slow. This site is slow and often times out. FTP to my own site is almost impossible if I want to upload a file that's bigger than 100kb.
I'm extremely frustrated.... There are reports of same exact issues in other thread, one seems to be fixed. Is there any way Verizon can look at that and apply it here?
http://forums.verizon.com/t5/FiOS-Internet/Slow-upload-and-tired-of-techs-closing-tickets/td-p/62221...
http://forums.verizon.com/t5/FiOS-Internet/Slow-upload-speed-on-evenings-for-almost-2-months-now-on-...
Problem was fixed for Headhunter6
http://forums.verizon.com/t5/FiOS-Internet/Unusable-upload-speed-at-night-and-during-weekend/td-p/62...
http://forums.verizon.com/t5/FiOS-Internet/extreme-slow-upload-speed-in-Dallas-area/td-p/619117
Is it because I'm using a community account on this forum so I'm being ignored?
I've tried to sign up using my residential account, but got this yellow error page.

Very slow upload speed via infinity 2 (business) u...

Very slow upload speed via infinity 2 (business) unlimited after phone line fix (street cabinet) ?
Had my line fixed today by engineer (no dial tone).
Download rate near normal but upload = 0.73Mbps!?
I reset modem and router after he left and appreciate my profile is probably in need of some TLC after a weeks line fault, but is this normal in this situation? I heard it can take some time to reprofile my line and before it was fixed it was even worse at 0.10Mbps
Just seems very low considered the line is now operational again.

48Hrs+ on from residential line reconnection my business infinity 2 broadband upload speed is now approaching normal speed levels.
What a 10 days that was all because some ass disturbed the cabling in the street cabinet!
Yes I'm aware I have business broadband and am talking about it in a residential based forum, but my actual phone line is still residential that it is supplied over and the business broadband product is much the same animal as that supplied to residential customers i.e. Infinity 2 Unlimited. Only the mail and option of static i.p. appear different - that is all.
Jeez.

Recent victim of slow evening speed....

Similar Messages

Maybe you are looking for