Recently bought an LG 3D tv and an LG 3d Blue Ray player but am having problems with my setup

I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all. My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of. My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all. The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all. I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound. When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?
Solved!
Go to Solution.

tomc1965 wrote:
I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all.
My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of.
My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all.
The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all.
I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound.
When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?

Similar Messages

How do I change file format so I keep HD and can play on blu ray player?

how do I change file format so I keep HD and can play on blu ray player?

Hi
Part of it - in my way of doing is
Roxio Toast™ Pro incl BD-component.
• Burn short AVCHD - on standard DVDs (20-30 minutes at HD quality) - NEED Blu-Ray player to be viewed
or BD-burner and disks - for full Blu-Ray Disks (not got to this yet)
I think that saving as .mpeg4 H.264 and save on USB-memory to be put into PlayStation3 also keep high quality playback.
Yours Bengt W

I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IMac, Airport, and setting up wireless blu-ray player

I'm trying to hook up an LG BD570 wireless network blu-ray player and was hoping to create the wireless network using Airport on my iMac. I used these instructions:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html
When I set up the network settings through the blu-ray, it recognizes my network, but it can't connect to it. Can I not use the iMac as a wireless router? The blu-ray is a couple rooms away from the computer, I don't know if that's too far.
Anyone have any suggestions?

missuswayne, Welcome to the discussion area!
Yes you can use your Mac that way. Unfortunately the Mac does not offer the flexibility nor robustness of a dedicated wireless router. Therefore if you have problems there is very little you can do to try to remedy them.
I suggest that you purchase an inexpensive wireless router instead of using your Mac.

I recently bought an external hard drive and attached it to a wireless modem router. The problem is that i can't access it from my macbook. I get a "connection failed" and "the server is available on your computer. Access the volumes and files locally".

Well I believe I described the problem above. I want only to add that the external hard drive is a Seagate FreeAgent GoFlex Drive 1TB and the wireless modem router is a Belkin N Plus (model F5D8635-4 v1). Also, in the finder window under "shared" I see a "belkinserver" and when I click it, it says "connection failed". If I click "connect as" I get the "the server "belkinserver" is available on your computer..." which I mentioned above. I tried to connect macbook via ethernet to the modem router and then when I typed "smb://belkinserver" it immediately prompted me for a username and a password and when I typed them finally I got to enter the contents of the hard drive! So what's the problem wirelessly?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

Hi, I've a Power Mac (7200/120) and like to convert regional files into windows. English files are ok but am haveing problems with files that was written in Bengali version using Bengalics(font) I would appreciate ur help.s

Hi, I'm new to this forum want help from you...
I've a Power Mac (7200/120) & been using for almost 10 years. Now the light of the Monitor is fadeing within five min. I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window. I heard there are softwares that convert Mac to Window but don't know they can convert to regional language.
I would appreciate if one can help me on this.
thanks

chand@007 wrote:
I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window.
You need to tell us A) what app did you create those files with? and B) what format are they in (.doc, .txt, etc)?
It may be possible to just transfer the files and your font to another machine without conversion depending on how they were made.
Where did you get the BengaliCS font?

TS5223 Hi I need help I can not sign into my phone I have an Apple Id and reset my password I updated it today. Having problems with icloud I think not sure

I need to use my phone and wish I did not update my phone I have not been able to use it all day How can I reset it so I can use it again It says to sign in with apple id that was used to set up this i phone. I have tried every passcode and ID that I have ever used

Are you sure it's your ID? Activation lock will require the ID and password that was originally used to activate the phone in order to reactivate. If the phone had a previous owner, it's their ID and password that is required, not yours.

HT3302 my ipod got wet by the sprinklier but i check for the red dot and its not there. Yet i am still having problems with it sense. Does anybody know what is wrong?

My ipod got a little wet but it wasnt that bad. none of the inside was wet really and the red dot hasnt appeared.........i was wondering if there is something else wrong with it because it keeps pausing when i dont do anything to it

As a precaution I would dry the iPod by:
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
After it is dry I would try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
For a nano the drying still applies
You have to find out how to reset the Nano
Yu can then try restoring via iTunes

TS2771 I have just fitted a new sreen and lcd to my ipod 4th gen everything is workink, but im having problems with selecting the upperscace and also the back space i have done a full reset and every thing i have tried has not resolved the problem

I have fitted a new screen and lcd to my ipod 4th gen and now I'm unable to select the uppercase on the key board also other key in the lower part of the screen are intermittent, I have now carried out a full reset and this has not resolved the problem, and the latest software is installed apart from this everything else is working can anyone help

Have you restored the iPod to factory defaults/new iPod? If so then you have a hardware problem. Maybe a loose/brken connector or maybe something else.

Put in correct user name and pass word but still having problem with account authenitication, have cleared with time warner cable,

can not write or receive, a pop up wants my password but will not accept. I have spent much time trying to correct this.

In order for us to better investigate this issue you need to add a little more non-personal information.
Please add the troubleshooting information to your post
To find the Troubleshooting information:
* Open Help (or click on three-line-icon and select Help)
* Choose Troubleshooting Information
* Use the button Copy to clipboard to select all. Do not check box "Include account names"!
* Paste this in your post.
Please also add the result of these troubleshooting steps to your post
*Does Thunderbird work in TB Safe mode (see [http://mzl.la/1k5DWjq Thunderbird Safe Mode])?
*Do you use anti-virus and firewall software? What is the version?
*Who is the email provider?
*Who is the internet provider?
*What is the exact error message?
*What steps did you take right before this happened?
Please post back with this information and any other questions you might have.

Best way to hook up blu-ray player to my HDTV and receiver

Sony BRAVIA 60" Class / 1080p / 120Hz / LED-LCD HDTV
Model: KDL60EX700 | SKU: 9763394
This HDTV features 1080p technology for brilliant high-definition images and a 3D comb filter for enhanced color purity. Easily connect to Netflix, YouTube and Slacker via the BRAVIA Internet Video feature. Internet ConnectableGet access to great Instant Content on this LCD HDTV. Connect to the Internet and you will have instant access to stream movies, listen to music and a wide variety of content through your HDTV. Learn more about Internet Connectable products. Netflix YouTube Pandora
4.7 Read reviews (63)
Sale: $2698.99
I just got the Sony BRAVIA 60" Class / 1080p / 120Hz / LED-LCD HDTV and I have a Yamaha RX-V1800. I want to buy and hook up a Blu-ray player to both. What the best way to do this? Should I use the optical audio to connect the Blu-ray to the receive and the HDMI to connect to the TV? I really want to be able to use HDMI for the audio but then I'm left with only component video for the TV. I can't filter the sound through the TV, this does not work. Does optical produce good audio?
Solved!
Go to Solution.

TheLexMachine wrote:
nblank15 wrote:
Okay so I did try to run everything through the Yamaha receiver and the refresh rate is just to slow. I put in the DVD Salt and as soon as there was a chase scene I got lot of blurring. Since I'm not going to get a new receiver any time soon is a HDMI to the TV and an optical to the receiver the best option?
You have no idea what you are doing which is why your results are not pleasing. Simply connect the equipment with HDMI cables as instructed and use only Blu-Ray discs as they are full-resolution sources. Your Blu-Ray player applies upscaling and processing to your DVD which is why it looks like crap and your receiver would do the same depending on the settings. You also need to check the settings on your player and HDTV to get them both aligned for the best picture quality.
Well I did use HDMI cables, and I also checked all of the setting on both the receiver and the TV. I did not use a Blu-Ray or player as I have not bought one yet. So are you saying the only way to not get a blur when using this set up would be to only watch Blu-Rays?? That does not make much sense. Also I would like to say I have some idea what I'm doing but obviously not as much as many people on this site, that's why I posted my question here. Thanks though for pointing out the obvious, It was very helpful of you.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

HT2731 my oldest daughter recently bought a new ipod touch and gave her old one to her brother. I need to know how to unlink the old ipod from her account without losing all the music and games on it. He would like to have his own account.

My oldest daughter recently bought a new ipod touch and gave her old one to her brother. How do I unlink his ipod from her account and set up his own without losing the music and apps already on it?

Connect it to his iTunes library and set it up as a new device. You should be prompted to Erase and Sync the iPod if his iTunes library is separate from hers.
Or head to Settings -> General -> Reset -> Erase all Content and Settings.
B-rock

I recently bought some songs from itunes, and I tried to sync my mac air laptop to my nano ipod, but it didn't work. I usually use my PC computer to do this, and my music is in the itunes library on my mac, it just won't sync to my ipod. Any ideas?Thanks!

I recently bought some songs from itunes, and I tried to sync my mac air laptop to my nano ipod, but it didn't work. I usually use my PC computer to do this, and my music is in the itunes library on my mac, it just won't sync to my ipod. When I tried to sync my ipod to my PC to see if the computer was the problem, my recently purchased songs still didn't show up. Any ideas as to what to do? Thanks!

http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/

I have recently bought a zen touch (20gb) and need help putting music on

I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.

You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.

Recently bought an LG 3D tv and an LG 3d Blue Ray player but am having problems with my setup

Similar Messages

Maybe you are looking for