Recently created items not shown in finder.

In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to show InDesign files or pdfs. The pdfs will show up about 20 minutes after creation, but that's not very helpful if I've just created something I need to email to a client immediately. Granted, I can navigate through the finder windows to the file and drag it into an email, but it's a lot easier just to open the "Today" or "All My Files" folder and see recently created files right there. Is anyone else having this issue?

You don't say how long ago you migrated. If it was very, very recently it may still be indexing. If not you may try reindexing as directed in Spotlight: How to re-index folders or volumes

Similar Messages

  • How can I display the 11000+ "items not shown?"

    I have Elements 7 and running Windows 7 64bit. "Show all" only shows a couple of thousand photos and 11000+ "items not shown."  I have never stacked or hidden any photos.  I've tried everything.  The "show hidden" gives me 0 photos.  When I ask to show a tag of some of the missing photos, I again get 0. The photos are not shown in any of the views.  When I try to reimport the photos, it says they are already there. I need help desperately. I've put too much work into this organizer to start from scratch.

    Thanks for the reply and the terrific FAQ source.  I followed the directions suggested, but things actually got worse.  When I tried display all, I got 0 photos - nada - zip.  I kept messing around and finally success.  I tried so many combinations of things that I'm not sure which actually solved the problem, but I believe it was reconnect all.  I had tried this a couple of times before without success, but this time I deleted from the catalog all items elements couldn't find, even though I knew where they were.  Lo and behold all 13000 photos appeared.  BTW many of those are duplicates.

  • Inserted CD is not shown in Finder, neither possible to load nor to get it out... Any idea?

    Inserted CD is not shown in Finder, neither possible to load nor to get it out again...
    Restart with pressed left Mouse button or Reset didn't help...
    Any idea? Thx

    Have you tried using Disk Utility? Utilities Folder>Disk Utility, hopefully the CD will be listed on the left. Select it and then click on the 'eject' butoon.
    Edit: If that didn't work, here's a few more suggestions: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • Album art not shown in finder

    Embedded album art in audio files is not shown in finder since I upgraded to ML (worked fine in SL).
    Other peaple report a solution of the problem with elimination of Voice Memos. But in my case this is not evident because I do not have Voice Memos.
    Does somebody know the solution of the problem?

    After hours struggling with this issue I finally found a solution (my setup is iTunes 10.7, OSX 10.8.3):
    (But my workaround is only for people who know how to handle iTunes libraries!!! And backup first!!)
    Open a new user account on your mac.
    Generate a new iTunes library called 'itunes', no other name!
    Import some files with embedded album art.
    Drag such a file back to desktop and you should see the icon of album art.
    Everything is like it should be.
    Now copy this new itunes library to your user account of origin.
    But first rename your old iTunes library different from 'itunes' e.g. 'itunesorigin'
    Open the new iTunes and drag one file to desktop, now miraculosly all audiofiles in all of your itunes libraries should show up album art IN FINDER including preview and quicklook.
    But this state is not stable. As soon as you open the old 'itunesorigin' the problem starts up again.
    So, the next steps are:
    Open the new iTunes and in preferences select the media folder of 'itunesorigin'. OK, say no to 'collate data'. Close iTunes.
    Now copy and replace from 'itunesorigin' to the new iTunes the following files:
    iTunes Library Extras.itdb
    iTunes Library Genius.itdb
    iTunes Library.itl
    iTunes Library.xml
    Open the new iTunes and it should look like the old 'iTunesorigin' with all your playlists etc..
    Close again.
    Move the media folder from 'iTunesorigin to the new iTunes folder (replace).
    Open new iTunes and select in preferences the new location of the media folder.
    Now you should have the file iTunes Music Library.xml instead of iTunes Library.xml.
    (iTunes Music Library.xml is the default if you have multiple libraries)
    Done! For me its stable and I am happy. Your iTunes folder should look like this picture:

  • At bottom of screen '36 items not shown" comes and goes??

    Thanks is advance for your help.
    At the bottom of the Organizer screens it always says "972 items dated etc". But then depending on something I do, possibly with tags, it sometimes shows "36 items not shown"  for a total of 1008.   Note the View does not show any hidden files.  One thing I noticed is when I put just one photo in an album and click on the album it will say "1 item found 1007 items not found for a total of 1008.
    What concerns me most is that I have 36 photos floating around somewhere that I can't see.

    Thanks Brett; However, the View hidden files and edit visibility seem to be the exact same settings?   Are you referring to anything else when you mention the "hidden" attribute are you referring to anything else. The only choices oh both are to:  Show all files, show hidden files and hide hidden files. None of these choices including show all files seem to show all the files. Any other suggestions would be helpful.  Thanks much

  • New items not shown

    Portal 3.0.8 - Solaris.
    I'm adding item to my content area and everything looks good until the item is submitted. It is then not shown on my CA page.
    If I create a new CA page the items will appear. But then the same thing happens all over again when adding new items.
    Anyone have a clue ?

    I was just over to my client and found some things out.
    No, I did not clear my browser cache but set it to check the page on every visit. Items still invisible.
    The items are invisible in both view and edit mode.
    This client originally created a content area with the NLS params set for the wrong language (default which didn't handle swedish chars). They then created a new content area using the correct NLS params. All CA pages created for this new CA will render items invisible. Creating new CA pages will not change anything.
    If setting the CA to use the CA page originally created for the first (default NLS) CA all items will be visible.
    Are we homing in on the problem here ?
    And yes, all this is done using the PORTAL30 user.

  • File sizes not shown in Finder

    Only a few sizes are shown for applications and folders in the Finder window. If I select a folder and then press Command-I, the size will be shown in the information window, but still not showing in Finder. Any thoughts?
    Macbook 100g   Mac OS X (10.4.8)  

    Hello Chris
    This is a View Option. Whilst you have a folder open, do View>Show View Options. In there you will find that you can have the folder sizes displayed and calculated automatically. You can also change this setting for all windows if you want it.

  • Anyconnect created profile not shown in connection list, especially the wireless profiles.

    Dears,
    Kindly advise as we encounter anyConnect issue, when creating profile for using with ISE, the new created profile is not shown in the connection list.
    I’m using profile editor to create profile for EAP-Fast, the issue is that the profile that was created not shown in the connection list.
    i put the xml file in the correct location
    C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles
    in windows 7.
    it is shown in saved networks but not shown in the connection list.
    we tried profile editor version 4 but the same issue still exist.

    Hi,
    Test the System Connector Type in the Portal.
    Connector should be any one of the Types :JDBC, ODBO, XMLA, OLAP then only the BI systems will be appear in the BI integartion wizard,
    Govindu

  • My Apple USB Superdrive can't read CD, CD is un-ejectable (not shown in Finder). Any ideas?

    After putting in a picture-CD nothing happened. Drive is running like normal, but the CD is not shown in the Finder-Menue. Therefor there is no eject-button or any possibility to throw the CD out.
    Is there any (mechanical( possibility? Thanks for any inputs. :-)

    See here:
    http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

  • SD card not shown in Finder, but shown in iPhoto

    Hej all,
    I have a problem with my SD card. It was shown by Finder on my iMac and it was shown in iPhoto too. Since a while no SD card is shown in Finder, but each SD card is still recognised in the Finder. I have a guess: I think, that I unconciously moved the SD card from the Finder to the s Desktop. Since then it's not in the Finder anymore, but also not on the Desktop.How can I get the card back also into the finder?
    Hope someone can help me.
    Markus

    See if pressing the Eject key ejects the disk. If it works, restart your Mac then re insert the disk.

  • Inspection Lot Created but not shown in QE72, and cannot input result or UD

    Hi Exports,
    I have  Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
    Inspection Lot status: CRTD CHCR SPRQ,
      in Business Process of inspection lot showing:
    *Cancel inspection lot
    Assign RMA proc. to insp. lot
    Assign notification to lot RMA
    Batch log indicator required
    Certificate missing
    Change inspection lot
    Change planned lot quantity
    Choose task list for insp. lot
    Confirm Receipt of Certificate
    Create part. lot for insp. lot
    Flag cancellation
    Inventory posting required
    Lock
    Lot for process documentation
    Lot reset allowed
    What is going wrong? 
    BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
    Daniel

    Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
    Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
    If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
    Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
    Cheers
    KK

  • SAP Inbox items not shown in UWL

    We are working on ESS , we have items in SAP Inbox and not shown in UWL for a employee.
    We are not able to login with the actual user. Is there any possibility to see UWL items of the item without his login?
    we have UWL connecters enabled for R/3 but still have problem for this user.

    Hi Kiran,
    If this is specific to one user or have you found same issue with others. To receive any workflow from backend system system need to be registered to UWL.
    Have a look at following threads for pointers
    /message/6018381#6018381 [original link is broken]
    /message/5093279#5093279 [original link is broken]
    /message/5093308#5093308 [original link is broken]
    Cheers,

  • USB storage devices not shown in Finder, yet function, and show in System Information?

    Occurring starting about last month, this has gone from a seldom, to all the time situation. plugging in any USB memory device either directly to the computer, or with cables, will allow the files to be accessed/changed/deleted by programs, but the device with it's files will not show in finder. The device shows in System information. I have set Finder to show everything, but they no longer apear. Before failing entirely, I would sometimes have the device show for a short time, then get an "Improper removal" error, without touching the device, after a few moments. All these memory devices still function properly when used in external devices and when direcly accesed by software. Not being able to use finder to modify content is a significant problem.

    Well I'm about out of ideas. Going off what you described, these devices work fine elsewhere and gradually failed on your computer.
    Unless someone else can post other ideas, I only can suggest a reinstall of Lion from scratch. I would make sure I had a good backup from TM and an additional backup of your important files just in case.
    Probably the easiest way would be to make a bootable USB stick or drive to work from. Procedure here: http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
    If you can accomplish that, see if you can boot from it. If so, use Disk Utility to erase the main drive and reformat it. Verify the drive is OK. Then quit Disk Utility abd procede to install Lion.
    When the installation is finished, reboot and use Setup Assistant imediately to migrate your user data and applications back from the TM drive. Don't use migration assistant later.
    I doubt it will help since the Comb-Update didn't fix it, but who knows.

  • External disk not shown in finder or diskutil

    When I connect an external harddrive to my Macbookpro it does not show on Finder, Diskutil (but the hdd disk starts). USB works fine. If I plug in FW when computer is shut down or sleep it works fine. Cant find out why. Tried with different cables and disks.

    You could run a Apple Hardware Test but I think the solution will be determined at a genius bar session.  I would suggest you make an appointment.
    Ciao.

  • External SSD not shown in Finder

    My external SSD does not appear in Finder and not in Disk Utility.
    The SSD is connected to my Macbook Pro via an USB cable form a SATA hard disc casing.
    I used the SSD in another MBP till it broke down (logic board failure). When I bought a new MBP I took the SSD out of the old one and put it in a casing with USB connection. I could rescue all data to my new MBP. Then I erased the SSD with tthe intention to use it only for photos.  It has worked fine for some time.
    I have used it on two macs and I also had it conntected via my Time Capsule. The TC connection was slow plus that I got problems with Time machine, so I skipped that. After that my problems began. None of my computer recognise the SSD now.
    Now I only can trace the SSD on System Information; under USB I see ”USB to S-ATA”. That is all.
    The power indicator on SSD casing is lighting.

    You probably have a bad controller in the enclosure. Purchase another and see if the SSD will work (they're very inexpensive and some are simply better than others - I use OWC enclosures for all of my clone drives).
    Good luck,
    Clinton

Maybe you are looking for