Recently I brought a android phone, i need to connect this to wifi. I created a wifi sharing. Although phone shows wifi and gets connected to it, internet on phone is not working

I am using a wire connection to my macbook for internet. It has static IP assigned to it. What are the setting that i have to do for airport connection. Do i have to create new airport connection? What IP address i need to assigne to it, i tried assigning ip address similar to static ip, but then my macbook internet stops working. Please help.

Let's address the simple thing first, is Cellular Data turned on? Settings > Cellular > Cellular Data
Settings > General > Reset > Reset Network Settings.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Similar Messages

Hi, my Macbook says its connected to the internet, but it's not working. It's about 2 years old and has been fine up until now. Its the same internet provider and I have a work PC laptop that is connecting fine. Any help greatly appreciated. Liz

Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
Liz

Believe it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet?

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Thread- unfortunately the process com.android.phone has stopped working

Hello Everyone,
I am Rohit from India but recently moved to new Zealand. I have been fan of lenovo since 2008 when I purchased first laptop Lenovo 3000 Y 410. after that I have recently imporated Lenovo vibeX S960 phone.
It was started and working well initially. but one day the message pop up about upgrade the firmware.
I have updated it to Kitkat 4.4.2. After that I have been constantly getting message " unfortunatly the process com.android.phone has stopped working".
I have tried factory reset few times but the error has not been removed.
I am annoyed by this problem.
Kindly give me solution. pls

try this: settings/appsswype to left until you reach ALL tab.scroll down to Phone icontap ittap on clear datatap on force stopreboot your device then try again with SSID code, if it still crash, only a factory reset probably will fix the issue.

TS3694 I tried to download the ios updates yesterday morning and not my phone will not work. I get a screen the appears to instruct me t connect t I Tunes. When I do that I received a message telling me that i need to restore factory settings. when I try

I tried to download the ios updates and now my phone will not work. I receive a screen that instruct me to connect to itunes. When I connect to itunes, i am told that i must restore factory settings. When i attempt to restore factory settings, i receive an error message that an unknown error has occured (3194)

There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

I have spent the last hour trying to upgrade my Iphone using ITunes. Now, my phone will not work at all. I think the backup is on my computrer, but it appears now to upload. What to do?

I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes. Now, my phone wil not work at all. I think it is backed up on my computer, but I am unable to get it to download to the phone. What to do?

Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim

I called Verizon today about my Droid Phone which, AGAIN, is NOT working. I've had it replaced once already. I've been with Verizon for 9 yrs. So my plan is due to renew Feb 20th, my phone is NOT working, do u think they would go ahead and HELP me? Phis

So, I called today to see if I could upgrade, as my contract for 2 yrs is up on Feb 20th. I've replaced the Droid once already. It was broken, just not by me. Now the thing won't even work, at all. I need this phone as I work for a major company and we use these devices at night to contact one another.
Anyway's, Rep 1 transferred me to Rep 2 saying "Rep 2 has more authority than I". Rep 2 immediately began finger pointing. Basically, said Rep 1 didn't feel like dealing with my situation. So, he was angry, talking fast, and would not "HEAR" what I needed to say. He offered me a few idea's but in the end said he would not / could not help me, although my phone is NOT working, AGAIN.
I told him I would probably be going to another provider, he then began to berate all other provider's. Gosh I hate when CSR's do that !
So,looks like I'm outta here, and this saddens me. I KNOW he could've helped me, he chose NOT too.
9 years I have been Faithful to this Company. This is the thanks I get? Man, this is so Wrong, on so many levels.
I am sure of one thing: Another provider would be happy to have me as a customer.

Your experience sounds terrible, mrpontiac225! I regret our failure to leave with any impression that you are anything but valued. We don't want you leaving us under any circumstance. What is the problem with your device? Is it a Droid Charge? What are the symptoms?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work now.

I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work. I started the download and it said that it had 6 hours remaining, so i just left it overnight. The next morning it was working fine, but the ios 6 didn't download. I looked at it later and it had the turning on screen with the loading bar under it. It stayed like that for a while and the bar didn't move. I needed to use my phone so I tried to make it go to the home screen, but nothing happened. I held down the lock and home button for a few seconds and everything went black. I tried to turn it back on and all it has done all day is stayed on the turning on screen. I tried plugging it into the wall, and nothing happened. I tried connecting it to iTunes, and nothing happened. I don't know what I need to do to get it to work.

OMG is working OMG OMG OMG Thanks alot dude!

My phone is not working at all. I had this problem before and I was trying to find a solution. However, at Apple Store in UK I was told to send my phone to Canada due to fact that I bought it there. What should I do and who will cover all my payments?

Hello,
My phone is not working at all. I had this problem before and I was trying to find a solution. However, at Apple Store in UK I was told to send my phone to Canada due to fact that I bought it there. What should I do and who will cover all my payments for a mail?
Thank you!

The iphone warranty is not international. It is based from the original country of purchase. You will need to ship to someone you know in the Canada to bring it to Apple for evaluation. Then that person will have to ship the phone back to you. Shipping and insurance will be at your expense. In the terms of the iphone warranty:
http://images.apple.com/legal/warranty/docs/iPhone_4_warranty.pdf
IMPORTANT RESTRICTION
Apple may restrict warranty service to the country where Apple or its Authorized Distributors
originally sold the Apple Product.

My phone is not working because of water damage what should i do?

my phone is not working because of water damage what should i do?

Water damage is not covered - here is some info:
support.apple.com/kb/HT3302
and:
support.apple.com/kb/index?page=servicefaq&geo=United_States&product=iphone
Edit: sorry, forum software glitch - I am unable to post a link, so you'll need to copy/paste above.

My phone is not working the way it did before the manditory iOS 7 update.

My phone is not working the way it did before the manditory iOS 7 update. It freezes, it lags, I get kicked out of my apps, my messages do not send half of the time, I can't view the pictures in my camera roll if I enlarge them, and the phone glitches randomly. How can this be fixed or what do I need to do to get it replaced??

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

HT1414 restoring my iphone 3gs is not completeing and the phone is not working

restoring my iphone 3gs is not completing and my phone is not working i took it to my local phone shop they told me that the new itunes will not fit onto the iphone 3gs, how can i get my phone to work.

If your restore is failing, there could be MANY issues... You may need to restore the phone back to "new phone" during the restore... PAY ATTENTION HERE... You will lose ALL contacts, photos, videos, voice memos, etc... But you will be able to re-add your apps< and music through itunes. that is very last resort though. if that doesnt work, I would look into updateing your phone. Personally I wouldn't get the 5, just because I dont need the additonal size screen... I have the 4S and LOVE it!! but, do some research, and see what you can find on the matter. But it sounds like your headed down hill fast with that phone... May be best just to upgrade and save yourself the frustration...

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

My phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.

HT4623 my phone is not working with i tune

my phone is not working with itune

You are going to have to rephrase your question. I cannot understand what you are trying to ask. I understand your phone is not working, but did you try and download iTunes afterwards? What do you need?

Recently I brought a android phone, i need to connect this to wifi. I created a wifi sharing. Although phone shows wifi and gets connected to it, internet on phone is not working

Similar Messages

Maybe you are looking for