Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9
Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?
Similar Messages
-
so it hasnt been updated for a long time (the update before ios5) and i wasfinally going to update it. Through the process an error occured and I unplugged my iphone 4 from my computer. Now it just shows an apple logo and it shows the itunes icon and the end of a charging cable (the usb side) basically it's telling me to connect to itunes and so I did and nothing itunes does not pick up a sign that my phone is plugged in. Please help! I will greatly appreciate any information on how to fix this problem!
You could reset your iPhone by holding the on/off and home buttons together for 6 or 7 seconds till the Apple logo appears.
-
Premiere elements crashing when adding disc menu on a mac
This has been happening for quite some time now.
I have tried saving as flv and mpg to avoid the problem but it still crashes.
Is there a solution. I am running OSX 10.9.2
I have verified the disk and permissions to no avail.
I have a project that I need to finish.Thank you for your response
What exactly is happening and when?
When I have finished editing the movie and ready to add a disc menu so that it can be played on DVD. Disc Menu is selected and when I try to drag it across the error occurs and it shuts down the program
Movie Menus only apply if you are creating a DVD, a BluRay or a WebDVD. Why are you outputting as an MPEG and FLV? I output as an MPEG and FLV to add to the internet and to keep as files for future use.
What model of camcorder is your original footage coming from and what format and resolution is it? I am importing an mov file which I have made a slideshow from in Slideshow Pro. I have been using the same process for over a year and it has only started happening in about 4 months ago.
When you add your video to your timeline in Timeline mode, do you see a red line alone the top of the timeline, above the clips? This indicates that you did not properly set up your project to match your video. No red line
What are your Project Properties, as listed under the Edit menu?
It might also help to know the hardware specs of your computer.
MacBook Pro -
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.2 (13C64) -
i'm trying to order a book in iphoto. everytime it begins to upload, iphoto shuts down in the middle of the process. Whats the problem?
Hi TD,
Yes they do appear in full size and I can edit them. I've just realized that it's not just photos from the Net that are not appearing - it seems to be happening for all photos I've imported into iPhoto after a certain date.
After spending many more frustrating hours trying to work this out, I found that if I click all of the 'events' which contain the photos I'm after and then create a Book - all these photos appear in the selection window strip. However I still need to work out a proper solution as this still limits me to only those photos in the highlighted 'events' and no new pictures can be added to that particular Book.
Heeeelp please!
axiom303 -
I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program. Now what?
I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program.
I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.
same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . . -
I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?
Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
(123935) -
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
HT1218 When trying to update Airport Express firmware I get an error message and it won't update.
When trying to update my Airport Express firmware I get an message that an error occured and it can't update.
most likey.Here is the new article apple has on it http://support.apple.com/kb/TS5376
-
When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens. I have followed all the trouble shooting suggestions but nothing works. Ideas?
Hi msclaude,
Welcome to the Support Communities! I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
If you can't update or restore your iPhone, iPad, or iPod touch
You can put your iOS device into recovery mode, then restore it using iTunes.
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
I hope this information helps ....
- Judy -
my ipad mini is in recovery mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
anybody know how to fix this?Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.
Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible
Maybe you are looking for
-
Hi All, i have some reports that has graph. in that graphs some graph is coming and some is not coming and giving error shown below. Graphing engine is not responding. A fatal error occurred while processing the request. The server responded with: or
-
Need guidance for ABAP certification
Hello All, I am going to write exam on C_TAW10 and TAW12. Wondering if anyone has any practice test on this, can be shared ? as i am doing training through Online from Genovate. I have worked on ABAP also, can anyone guide me how to prepare for the E
-
Need help about sending back xml to MIDlet from servlet
Hi all, I need an example (or maybe some links or tutorials) about using servlet as the resource files for kXML parsing in J2ME. Can somebody help me ? Actually, I want to know how servlet generate xml and send it back to the client (MIDlet). My rece
-
I have developed a standalone program, then i execute from the ABAP editor, but the report cannot execute properly, and shown a error message "No name free for internal report copy. Save the report first". After i save the report, the message still a
-
Error 500: Expression Error: Named Object: 'EtnaMenuComponent' not found
I am migrating my JSF application from WAS 5.1 to WAS 6.1. When I start application I get this error: Error 500: Expression Error: Named Object: 'EtnaMenuComponent' not found. Component EtnaMenuComponent is registered and works in WAS 5.1. Help pleas